summaryrefslogtreecommitdiff
path: root/components/drivers/misc
AgeCommit message (Collapse)Author
2026-07-08drivers: dac: Fix disable callback checkOld-Ding
_dac_control() checked the enabled callback before invoking disabled for RT_DAC_CMD_DISABLE. That can reject DAC drivers that provide a disable callback without enable, and can call through a NULL disabled callback when only enable is implemented. Check the disabled callback in the disable command path so the guard matches the operation being dispatched. Generated-by: OpenAI Codex Signed-off-by: Old-Ding <[email protected]>
2026-07-07feat[ADC]: 新增 ADC V2 驱动支持 (#11440)wdfk-prog
* feat[ADC V2]: add ADC V2 driver support add ADC V2 core APIs, session state management, and sequence read support add STM32 ADC V2 HAL backend with internal-channel and VREF handling add per-series STM32 ADC V2 default configuration headers wire ADC V2 Kconfig and SConscript integration for components and STM32 BSP drivers keep ADC V2 mutually exclusive with the legacy ADC driver path * feat[ADC V2]: add ADC V2 MSH special channel read support add generic ADC V2 MSH commands for probing, configuring, raw reads, voltage reads, and sequence reads add STM32 ADC V2 backend special commands for VREFINT, temperature sensor, and VBAT reads add STM32 helper APIs for special logical channels, sampling time, resolution, and temperature calculation wire ADC V2 MSH sources through Kconfig and SConscript * feat[ADC V2]: add ADC V2 stream DMA support add ADC V2 stream APIs with latest-frame and FIFO buffering policies wire STM32 ADC V2 to circular DMA stream mode with per-instance Kconfig options extend STM32 ADC config headers and DMA helpers for stream DMA configuration add FinSH stream commands for start, read, cancel, and stop operations handle Cortex-M7 cache-safe DMA buffers for STM32 stream sampling * feat[ADC V2]: add timer trigger support for ADC V2 streams add ADC V2 trigger configuration, validation, and lifecycle coordination add timer update trigger support through clock timer TRGO controls map STM32 ADC V2 timer update triggers to HAL external trigger selector fields add Kconfig, SConscript, and MSH entries for ADC trigger setup and inspection * feat[ADCV2]: add timer and comparator trigger selectors add ADC V2 timer compare and analog comparator trigger configuration support extend clock timer trigger config with compare event and channel fields wire STM32 ADC external trigger selector mappings for TIM update, TIM compare, and COMP output add FinSH trigger_set commands and Kconfig switches for timer and comparator trigger backends * fix[ADC V2]: resolve ADC V1 compatibility Kconfig loop * ci[ADC V2][stm32]: add ADC v2 peripheral config for stm32f407-rt-spark BSP
2025-12-09[Driver][MISC] Update ADC/PWM (#11003)GUI
* [DM][MISC] Make Kconfig(ADC/PWM) import for DM * [Driver][MISC][ADC] Fixup ADC 1. Fixup error no. 2. Fixup type of control for args. 3. Fixup value no init. * [Driver][MISC][PWM] Enable `rt_pwm_get` API Signed-off-by: GuEe-GUI <[email protected]>
2025-11-13Fixed PWM assertion error caused by using DMrcitach
2025-06-10components: drivers: adc: fixed cppcheck errorChen Wang
[cpp_check.py 80 INFO] components/drivers/misc/adc.c:76:12: error: Uninitialized variable: result [legacyUninitvar] return result; ^ Signed-off-by: Chen Wang <[email protected]>
2025-06-10componnets: drivers: adc: remove build warningsChen Wang
gcc build warnings: cast from pointer to integer of different size [-Wpointer-to-int-cast] For rt_adc_ops.enabled, the type of second param is rt_int8_t, original _adc_control also called with wrong type casting. Convert first to rt_base_t, then cast to rt_int8_t to remove the build warnings. Signed-off-by: Chen Wang <[email protected]>
2025-03-01fix:pwm msh errCYFS
2024-07-18Fix potential return value discrepancy when writing to urandomzhao maosheng
2024-06-26[bsp][stm32]Optimize ADCs and fix some bugsyiyi
2024-06-16[components] [drivers ] [Kconfig] 整理 components/drivers 的 Kconfig (#9054)sp-cai
整理 components/drivers 的 Kconfig
2024-06-03[fix][misc][adc] 修复 ADC 电压转换的计算错误sp-cai
2024-05-30dev: random should copy size bytes of data to buffer (#9012)Shell
2024-03-31[devcie][pwm] fix warningsMeco Man
2024-03-18[stm32][pwm] fix warning in Keil5Meco Man
2024-02-29[component][drivers]add pinctrl/pin-irqchip (#8383)zms123456
2023-12-26[pwm] Fix compiler warning1ridic
2023-12-25[pwm] Add second-level command completion1ridic
2023-07-19[bsp][stm32][airm2m]<pin>更新pin num命令 (#7390)wangqinglin
2023-06-22[DeviceDrivers] prepare for device driver v2.0 (#7697)Bernard Xiong
2023-06-13[adc] remove dead codeMingjie Shen
The variable result_str is never used after this assignment.
2023-04-17[HUST CSE] Fix many abnormal symbols in annotations and format code7YZ7
2023-04-08[adc] modify adc channel data type from rt_uint32_t to rt_int8_tMeco Man
2023-04-08[DFS] prepare for dfs_v2.0 (#7200)Bernard Xiong
* [DFS] prepare for dfs_v2. dfs_fd -> dfs_file; dfs_fnode -> dfs_vnode. * [BSP] fix code analysis warning * [smart] fix the pointer overflow. * code format * [smart] fix the lwp->lwp_obj checking.
2023-03-20[errno code][-RT_ERROR] fix that use RT_ERROR without -Meco Man
2023-02-26[pin][5.0.0] 修正pin框架数据类型使用不当 (#6934)Zxy
2023-02-07rt_device_write/read return data type as rt_ssize_tMeco Man
rt_ssize_t can give negative error code, which follows the unix style correctly
2023-01-08format Kconfig and sconscriptMeco Man
2022-12-03sync branch rt-smart. (#6641)guo
* Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <[email protected]> Co-authored-by: zhkag <[email protected]>
2022-10-15[bsp][c28x] 新增adc驱动 (#6520)YuQi
1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d 2. 新增adc驱动与kconfig配置
2022-09-25[TMS320F28379] implement PWM driver (#6457)YuQi
增加c28x芯片的pwm驱动 已经在TMS320F28379中通过测试 pwm设备框架增加如下方法： #define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8) #define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9) #define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10) #define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
2022-09-01[rt_drv_pwm]完善PWM框架互补输出部分代码 (#6338)liYangYang
* [pwm]Improve the code * 将与bsp无关的代码移植到框架部分 * 添加注释
2022-07-26修复了pwm互补输出的一些bug，并在finsh中添加使用说明 (#6191)liYang~
* Fix the bug of complementary output
2022-07-22Solve the problem that LOG_W() may not be recognized when the INPUT CAPTURE ↵Jiang Runnan
module is enabled,which may cause the compilation failure.
2022-07-04[rt_drv_pwm]增加API：增加单独设置PWM频率和脉宽的函数 (#6130)BreederBai
* [rt_drv_pwm]增加API：增加单独设置PWM频率和脉宽的函数
2022-06-22[rtdevices] eliminate recursionMeco Man
2022-05-30[componnets][pin]add pin operate command in MSH (#5892)xfwangqiang
* 1. 在AT32的BSP的drv_gpio中增加了at32_pin_get函数，用于实现rt_pin_ops对象中的pin_get 2. 在MSH中增加了PIN的操作命令 3. 为了方便在MSH命令中解析字符串，增加了一些字符串相关的函数
2022-05-29[device][adc] implement adc_get_vref (#5988)Stanley Lwin
* add adc_get_vref add stm32_adc_get_vref
2022-05-25[adc][pwm] correct the command descriptionMeco Man
2022-05-19[adc.c] add finsh voltage conversion command (#5937)Stanley Lwin
* Update adc.c add finsh voltage conversion command
2022-05-19[rt_drv_pwm.c] add finsh pwm function (#5944)Stanley Lwin
* add finsh pwm function
2022-05-09[stm32][l4] add tim7 support | ↵Man, Jianting (Meco)
设备框架以及驱动错误码处理逻辑存在问题 (#5901)
2022-04-23[dac] add get resolution methodMeco Man
2022-04-22[pwm] 优化pwm框架 (#5857)Man, Jianting (Meco)
2022-04-22[adc] 支持adc框架获取BSP的ADC分辨率 (#5853)Man, Jianting (Meco)
2022-04-15Fix return value of rt_dac_write function. (#5816)Wayne
Co-authored-by: Wayne Lin <[email protected]>
2022-04-06[device]Detailed classification of devices types (#5769)Tangyuxin
2022-02-10修改dac.c函数名称错误 (#5591)woody
2022-01-09[core] 使用rt_memcpy rt_memset代替memcpy memsetMeco Man
2021-10-12解决无法dist问题 (#5150)Lim-LinYuanbo
* first commit, keil test pass * feat : n32g452xx direct structure base at32 1. 重新整理目录结构 * feat : 基于AT32,将各驱动移植整改待验证 1. 部分驱动已经整改,但未验证 2. 根据AT32整改目录结构 * feat : add README document 1. 完善配置文件 2. 添加说明文档 * feat : 验证添加的驱动 1. UART 1-3 验证通过 2. ADC 1-2 CH 6-9 验证通过 3. TIM 6-7 验证通过 * feat : complete readme document * feat : format code 1. ref https://github.com/mysterywolf/formatting * feat : 完成PWM驱动移植与自测 1. 添加PWM测试代码 2. 修正PWM驱动周期与脉冲错误问题 * feat : 删除多余代码与多余的文件,修正注释与函数命名 * feat : fix tim channel comment * feat : 完成DEMO测试例子 1. 完成MAIN函数中的LED测试例子 2. 完善README文档 3. 更新添加许可文件 * feat : 根据BSP提交自查完善固件 1. 添加.ignore_format.yml文件 2. 修正main.c的注释 * feat : add last line in .ignore_format.yml * feat : delet file_path in .ignore_format.yml * fix: gPIO/ADC driver 1. add ADC temperature&vref channel. 2.add GPIO IPD/OD configration * fix: 解决告警 1. 解决告警(rt_drv_pwm.c: warning: implicit declaration of function 'atoi') * feat: add scons --dist function * fix: 解决MDK5无法编译问题 * perf: delete invalid code Co-authored-by: linyuanbo_breo_server <[email protected]>
2021-08-23Remove C Style Command Shell马志远
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-24 13:47:45 +0000