| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2023-02-07 | rt_device_write/read return data type as rt_ssize_t | Meco Man | |
| rt_ssize_t can give negative error code, which follows the unix style correctly | |||
| 2023-01-23 | [devicedrivers] fix the partition issue in mmc/sdio | bernard | |
| 2022-12-13 | [components] fix compiling warning (#6733) | Bernard Xiong | |
| 2022-12-03 | sync branch rt-smart. (#6641) | guo | |
| * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <[email protected]> Co-authored-by: zhkag <[email protected]> | |||
| 2022-11-08 | [sdio] remove mmcsd_delay_ms | xiao xie | |
| 修改SD检测线程函数里面的延时实现，将mmcsd_delay_ms改为rt_thread_mdelay. mmcsd_delay_ms过时且延时计算错误。 | |||
| 2022-11-02 | bugfix: remove sdcard block dev may cause a constant loop. | xiaoguang_ma | |
| 2022-10-09 | bug fix | xiaoguang_ma | |
| When detecting all SDIO devices fails, it is also necessary to return information | |||
| 2022-09-20 | [fix] Fix simulator compilation warnings (#6438) | Tangyuxin | |
| * [fix] Fix simulator compilation warnings * Update bsp/simulator/rtconfig_project.h Co-authored-by: Man, Jianting (Meco) <[email protected]> | |||
| 2022-04-06 | [components][sdio] Support DDR mode | tyx | |
| 2021-12-31 | [components][sdio] fix compile warning and optimized code. | nongxiaoming | |
| 2021-12-24 | Remove unused comment. | Wayne Lin | |
| 2021-12-24 | Correct sem's name of sd block device. | Wayne Lin | |
| 2021-12-24 | Strip tailing space. | Wayne Lin | |
| 2021-12-24 | [SDIO] Create SD block device. | Wayne Lin | |
| 1. New naming rule for multiple cards: sdXpY. Ex: sd0, sd0p0, sd0p1, sd1, sd1p0, sd1p1, .... sdXpY. 2. Always create super-node for backward-compatible and fdisk-like utility. EX: sd0, sd1, ..... sdX. 3. Shrink code. | |||
| 2021-12-24 | Revert to RT_IPC_FLAG_PRIO. | Wayne Lin | |
| 2021-12-24 | Support multi-partition/-card mounting. | Wayne Lin | |
| 2021-12-24 | Fix infinite-loop in rt_mmcsd_blk_remove. | Wayne Lin | |
| 1. Issue on traveling latest node in list if multi-partitions on card. | |||
| 2021-11-17 | [mutex] use RT_IPC_FLAG_PRIO to replace RT_IPC_FLAG_FIFO | Meco Man | |
| 2021-08-01 | [sdio] remove rt_mmcsd_blk_init | Meco Man | |
| 2021-07-09 | 修改mmc初始化错误，将card-》csd写成card-》cid | @lin12345678 | |
| 2021-04-13 | Update mmc.c | Jianjia Ma | |
| 2021-04-13 | Add more trys when switching data width | Jianjia Ma | |
| Try a few times before switching to other data widths. The original strategy (simply wait for 20ms ) failed on STM32H743 with an MTFC4GACAJCN-4M (4GB EMMC) when switching data width. (unless the debugging info is enabled, which add more delays) With this EMMC, the fixed delay was set to 50ms for it to be able to work. Instead of a fixed delay, I think we better change to trying a few more times with smaller delays. | |||
| 2021-03-08 | [compoenets] auto & manual formatted | Meco Man | |
| 2021-02-05 | [sdio] free memory and enhance performance | wanghaijing | |
| 2020-11-27 | Improve the clock Settings for switching to high speed mode in the SDIO ↵ | guozhanxin | |
| framework. | |||
| 2020-03-16 | component: sdio: fix potential ricky clock setting | Shawn Lin | |
| Currently RTT mmc stack only support Highspeed mode or blow, which means the max speed should be 52MHz according to JEDEC spec. Two problems show here: (1) max_data_rate = (unsigned int)-1. The value of unsigned int depends on compilers/arch. Moreover, it makes no sense to assume cpu addressing width with IP clock rate limit. (1)hs_max_data_rate was set to 200MHz. So what should BSP drivers do if 52MHz < max_data_rate < 200MHz? Either it blindly sets a spec-violated clock rate to drive a Highspeed card, or just adjust the clock rate internally. Both cases are really bad for practice. If the card claims to support Highspeed, we set the clock to not to exceed 52MHz. Otherwise it should be set according to card->max_data_rate parsed by ext_csd. This patch fixes it as-is, and also simplify the code a lot. Signed-off-by: Shawn Lin <[email protected]> | |||
| 2020-03-12 | [Components] sdio: try bus width depends on host's capability | Shawn Lin | |
| It makes no sense to try bus width if not supported by drivers or BSP, since we know it must be failed. It saves a lot for booting in time critical environment. Signed-off-by: Shawn Lin <[email protected]> | |||
| 2020-03-12 | [component] sdio: Fix mmc mount function if the whole device is a partition | Shawn Lin | |
| If the whole sd card was formatted as a partition, current code break out the loop mistakenly, so it skips dfs_mount_device later. Simply remove the broken 'break' to solve this problem. Signed-off-by: Shawn Lin <[email protected]> | |||
| 2020-02-28 | fix raspi3-64 sdio driver | bigmagic | |
| 2020-02-23 | Update sd.c | A.orz | |
| clean #if 0 code | |||
| 2019-11-16 | 1.修复sd卡热插拔内存泄露的bug | hichard | |
| 2.dfs增加函数，配合实现sd卡热插拔自动挂载卸载文件系统 | |||
| 2019-09-03 | [components][drivers][sdio]修复 SDIO product 为空的问题 | tangyuxin | |
| 2019-07-19 | sdio: mmc.c: 修复缩进/Fix indentation. | Zhou Yanjie | |
| 修复版权信息中的缩进格式。 Fix indentation in copyright information. Signed-off-by: Zhou Yanjie <[email protected]> | |||
| 2019-07-19 | sdio: mmc.c: 防止容量计算过程溢出/Prevent capacity calculation ↵ | Zhou Yanjie | |
| overflow. 修改“mmc_parse_ext_csd”函数，防止容量计算过程溢出。 Modify the "mmc_parse_ext_csd" function to prevent the capacity calculation process from overflowing. Signed-off-by: Zhou Yanjie <[email protected]> | |||
| 2019-05-12 | [BSP][qemu-vexpress-a9] code cleaup for compiling warning. | Bernard Xiong | |
| 2019-04-12 | Update all of debug log definition to DBG_TAG and DBG_LVL. | armink | |
| 2019-03-06 | Remove the DBG_COLOR and DBG_ENABLE definition. | armink | |
| 2018-12-13 | Fix the value width issue under 32/64 bit arch. | Bernard Xiong | |
| 2018-11-02 | [components][DeviceDriver] Update log tag from [SDIO] to SDIO. | armink | |
| 2018-10-14 | [license] Change license to Apache. | Bernard Xiong | |
| 2018-10-12 | [Components][SDIO]修复脏值调用 | ZYH | |
| 2018-09-30 | [Components][SDIO]fix 'rocr' declared without an initial value | ZYH | |
| 2018-09-22 | [Components][SDIO][MMC] fix null point check | ZYH | |
| 2018-09-22 | [Components][SDIO]fix Null point access | ZYH | |
| 2018-09-22 | [Components][SDIO]block 'err' declared without an initial value | ZYH | |
| 2018-09-22 | [Components][SDIO]fix Assigned value is garbage or undefined | ZYH | |
| 2018-09-11 | Merge pull request #1774 from EvalZero/sdio_dev | Bernard Xiong | |
| [DeviceDriver][SDIO] Update sdio debug log. | |||
| 2018-09-09 | [sdio] Fixed merge error. | weety | |
| 2018-09-09 | [sdio] Fixed issue for requset size calculation. | weety | |
| 2018-09-09 | [sdio] Fixed error for dma size calculation. | weety | |
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |