| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2021-02-05 | [sdio] free memory and enhance performance | wanghaijing | |
| 2020-11-27 | Improve the clock Settings for switching to high speed mode in the SDIO ↵ | guozhanxin | |
| framework. | |||
| 2020-03-16 | component: sdio: fix potential ricky clock setting | Shawn Lin | |
| Currently RTT mmc stack only support Highspeed mode or blow, which means the max speed should be 52MHz according to JEDEC spec. Two problems show here: (1) max_data_rate = (unsigned int)-1. The value of unsigned int depends on compilers/arch. Moreover, it makes no sense to assume cpu addressing width with IP clock rate limit. (1)hs_max_data_rate was set to 200MHz. So what should BSP drivers do if 52MHz < max_data_rate < 200MHz? Either it blindly sets a spec-violated clock rate to drive a Highspeed card, or just adjust the clock rate internally. Both cases are really bad for practice. If the card claims to support Highspeed, we set the clock to not to exceed 52MHz. Otherwise it should be set according to card->max_data_rate parsed by ext_csd. This patch fixes it as-is, and also simplify the code a lot. Signed-off-by: Shawn Lin <[email protected]> | |||
| 2020-03-12 | [Components] sdio: try bus width depends on host's capability | Shawn Lin | |
| It makes no sense to try bus width if not supported by drivers or BSP, since we know it must be failed. It saves a lot for booting in time critical environment. Signed-off-by: Shawn Lin <[email protected]> | |||
| 2020-03-12 | [component] sdio: Fix mmc mount function if the whole device is a partition | Shawn Lin | |
| If the whole sd card was formatted as a partition, current code break out the loop mistakenly, so it skips dfs_mount_device later. Simply remove the broken 'break' to solve this problem. Signed-off-by: Shawn Lin <[email protected]> | |||
| 2020-02-28 | fix raspi3-64 sdio driver | bigmagic | |
| 2020-02-23 | Update sd.c | A.orz | |
| clean #if 0 code | |||
| 2019-11-16 | 1.修复sd卡热插拔内存泄露的bug | hichard | |
| 2.dfs增加函数，配合实现sd卡热插拔自动挂载卸载文件系统 | |||
| 2019-09-03 | [components][drivers][sdio]修复 SDIO product 为空的问题 | tangyuxin | |
| 2019-07-19 | sdio: mmc.c: 修复缩进/Fix indentation. | Zhou Yanjie | |
| 修复版权信息中的缩进格式。 Fix indentation in copyright information. Signed-off-by: Zhou Yanjie <[email protected]> | |||
| 2019-07-19 | sdio: mmc.c: 防止容量计算过程溢出/Prevent capacity calculation ↵ | Zhou Yanjie | |
| overflow. 修改“mmc_parse_ext_csd”函数，防止容量计算过程溢出。 Modify the "mmc_parse_ext_csd" function to prevent the capacity calculation process from overflowing. Signed-off-by: Zhou Yanjie <[email protected]> | |||
| 2019-05-12 | [BSP][qemu-vexpress-a9] code cleaup for compiling warning. | Bernard Xiong | |
| 2019-04-12 | Update all of debug log definition to DBG_TAG and DBG_LVL. | armink | |
| 2019-03-06 | Remove the DBG_COLOR and DBG_ENABLE definition. | armink | |
| 2018-12-13 | Fix the value width issue under 32/64 bit arch. | Bernard Xiong | |
| 2018-11-02 | [components][DeviceDriver] Update log tag from [SDIO] to SDIO. | armink | |
| 2018-10-14 | [license] Change license to Apache. | Bernard Xiong | |
| 2018-10-12 | [Components][SDIO]修复脏值调用 | ZYH | |
| 2018-09-30 | [Components][SDIO]fix 'rocr' declared without an initial value | ZYH | |
| 2018-09-22 | [Components][SDIO][MMC] fix null point check | ZYH | |
| 2018-09-22 | [Components][SDIO]fix Null point access | ZYH | |
| 2018-09-22 | [Components][SDIO]block 'err' declared without an initial value | ZYH | |
| 2018-09-22 | [Components][SDIO]fix Assigned value is garbage or undefined | ZYH | |
| 2018-09-11 | Merge pull request #1774 from EvalZero/sdio_dev | Bernard Xiong | |
| [DeviceDriver][SDIO] Update sdio debug log. | |||
| 2018-09-09 | [sdio] Fixed merge error. | weety | |
| 2018-09-09 | [sdio] Fixed issue for requset size calculation. | weety | |
| 2018-09-09 | [sdio] Fixed error for dma size calculation. | weety | |
| 2018-09-08 | [sdio] Limit the data size per request based on the sdio controller driver ↵ | weety | |
| configuration parameters. | |||
| 2018-09-05 | [DeviceDriver][SDIO] Update sdio debug log. | EvalZero | |
| 2018-07-21 | [components][drivers][sdio]修复没有注册SDIO中断导致断言的问题 | tangyuxin | |
| 2018-06-26 | [components][drivers]sdio 给局部指针变量赋初值,修复潜在问题 | tangyuxin | |
| 2018-06-10 | [Kernel] Add device ops feature. | Bernard Xiong | |
| 2018-03-04 | [DeviceDrivers][MMC] rename fls to __rt_fls | Bernard Xiong | |
| 2017-12-24 | [DeviceDrivers] fix compiling warning | Bernard Xiong | |
| 2017-12-07 | [DeviceDrivers] Fix missing mailbox after SDCard hot plug | tanek liang | |
| 2017-11-06 | [DeviceDrivers] Fix compiling issue in MMC/SD. | Bernard Xiong | |
| 2017-11-05 | [DRIVER][SDIO] Add components initializer. | weety | |
| 2017-10-20 | [bsp][dm365] Support rt_hw_console_output function; Adjust the ↵ | weety | |
| initialization sequence; Cleanup code. [drv][mmcsd] Undo Changes. | |||
| 2017-10-19 | [bsp][dm365] Using component initial; | weety | |
| [drv][mmcsd] Add component initial. | |||
| 2017-10-15 | [DeviceDrivers] change cmd type. | bernard | |
| 1. Change 'rt_uint8_t' type of cmd to 'int'; 2. Add waitqueue; 3. Split device ipc header files; | |||
| 2017-07-04 | Update sdio.c | ruiqian | |
| 2017-07-04 | Update mmcsd_core.c | ruiqian | |
| 2017-06-06 | [DeviceDrivers] Improve compatibility for SDIO CCCR v3.00. | bernard | |
| 2017-04-19 | Update sdio.c | ruiqian | |
| 2017-04-19 | Update sdio.c | ruiqian | |
| Fix a bug in function sdio_unregister_driver | |||
| 2016-05-20 | [DeviceDrivers] Add MMC/SD change support. | Bernard Xiong | |
| Add MMC/SD change support, which patched by FH. | |||
| 2016-04-05 | [DeviceDrivers] Add umount operations in SDCard block device. | Bernard Xiong | |
| 2016-04-05 | [DeviceDrivers] Add card remove operations in MMC/SD. | Bernard Xiong | |
| 2016-03-01 | [DeviceDrivers] fix the compiling warning in MMC/SD | Bernard Xiong | |
| 2015-08-09 | [DeviceDrivers] fix sd->drv issue in sdio | Bernard Xiong | |
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |