| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Append a null statement for "Any statement may be preceded by a prefix that declares an identifier as a label name."
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [bsp][stm32][drv_usart_v2] uart_isr不再使用链式调用，RXNE内循环读空，一些细节优化
* [componnents][drivers][serial_v2] 增加获取config接口，使用rt_tick_get_delta替代内部的时间绕回判断，写满丢弃策略rx接收数据错乱修复，clang-tidy和cppcheck审查优化
* [utest][drivers][serial_v2] 测试例程进行优化
* [bsp][stm32][drv_usart_v2] 撤回DMAMUX1修改
* [componnents][drivers][serial_v2] read和write不再返回-RT_ETIMEOUT改为已发送或读取的字节数，细节优化
* [utest][drivers][serial_v2] 增加单独的timeout测试，减少测试中的硬延时
* [utest][drivers][serial_v2] 漏提交的posix下标志位
* [utest][drivers][serial_v2] 优化测试例程
* [bsp][stm32][drv_usart_v2] transmit返回错误值，RXNE增加超时逻辑
* [componnents][drivers][serial_v2] 增加transmit错误处理，增加超时退出机制显式的避免死循环
* [componnents][drivers][serial_v2] 适配serial_v2和posix非libc标准库下的console和shell
|
|
In the serial ISR (`rt_hw_serial_isr`), the previous logic for handling a full RX FIFO was flawed. When the buffer was filled, it would increment `get_index` (`get_index += 1`).
This had two negative consequences:
1. It effectively discarded the oldest byte of data prematurely.
2. It reduced the usable capacity of a buffer of size N to N-1. For example, a 64-byte buffer could only ever hold 63 readable bytes after becoming full.
This patch corrects the behavior by implementing a standard overwriting ring buffer strategy. When the buffer is full, the logic is changed to `get_index = put_index`.
This ensures that:
- When new data arrives, it correctly overwrites the oldest data.
- The `get_index` is advanced along with the `put_index`, correctly marking the new start of the buffer.
- The full N-byte capacity of the buffer is utilized, always storing the N most recent bytes.
This change resolves the unexpected data loss and makes the buffer behavior correct and predictable.
|
|
Signed-off-by: sakumisu <[email protected]>
|
|
|
|
issue (#10524)
* Modify the reference path of the header file in the middle section
* format
* Fix smart serial_v2 bypass compile error issue
* add allwinner/d1s ci
|
|
修复CAN底层无法工作时导致调用 _can_int_tx 的线程一直挂起的问题
Solution: 使用 can->status.sndchange 的bit位来表示某个发送邮箱超时
如果超时 底层驱动再通知tx_done或者tx_fail事件时不予处理
Signed-off-by: Yucai Liu <[email protected]>
|
|
|
|
Problen:
Duplicated definition of group_clk in clk.c and clk.h.
Solution:
Delete the definition in clk.c and keep only the definition
in clk.h.
Also change the name of group_clk to group_driver_clock to
conform to the naming convention of other driver groups.
Signed-off-by: Chen Wang <[email protected]>
|
|
* doxygen: fs: unify groupname to lowercase
Signed-off-by: Chen Wang <[email protected]>
* doxygen: drivers: unify groupname to lowercase
Signed-off-by: Chen Wang <[email protected]>
* doxygen: signal: unify groupname to lowercase
Signed-off-by: Chen Wang <[email protected]>
---------
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: sakumisu <[email protected]>
|
|
structure to support parameters in the absence of DMA configuration.
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Used for QEMU on PCI
Signed-off-by: GuEe-GUI <[email protected]>
|
|
This device is commonly used in SoCs.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* Make a priv data read API for probed SPI device
* Fixup the SPI device pre-alloc
|
|
* update cdc_acm device framework
* add host serial device framework
* fix dfs read write return type
* fix webusb desc len
* fix dwc2 h7rs gccfg
Signed-off-by: sakumisu <[email protected]>
|
|
|
|
[cpp_check.py 80 INFO] components/drivers/misc/adc.c:76:12:
error: Uninitialized variable: result [legacyUninitvar]
return result;
^
Signed-off-by: Chen Wang <[email protected]>
|
|
gcc build warnings:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
For rt_adc_ops.enabled, the type of second param is rt_int8_t,
original _adc_control also called with wrong type casting.
Convert first to rt_base_t, then cast to rt_int8_t to remove the
build warnings.
Signed-off-by: Chen Wang <[email protected]>
|
|
- add the alarm using local time for calculation
Signed-off-by: Runcheng Lu <[email protected]>
|
|
The originally defined "group_Drivers" should actually
be part of the device-driver component, so
"group_Drivers" is renamed to "group_device_driver".
In this way, the original "group_Device" and
"group_Drivers" are merged into "group_device_driver".
Adjusted the writing method of doxygen comments in the
driver code to be unified as follows:
```c
* @defgroup group_XXX XXX
* @brief xxxxxx
* @ingroup group_device_driver
```
Signed-off-by: Chen Wang <[email protected]>
|
|
1. Add ROM base info.
2. Save th PM status.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
写满丢弃策略对dma_ping_buf的处理有误、细节调整
|
|
warning issue.
|
|
Achieve driver framework by operating memory to simulate audio
peripheral drivers. And it could be as a draft standrad for other
drivers test framework.
Signed-off-by: 1078249029 <[email protected]>
|
|
加超时时间、flush、获取缓冲区数据长度命令、数据溢出逻辑修复、稳定性细节优化、添加更多serial_v2测试用例
[components][serial_v2] 优化txflush逻辑、对tx的activated做中断保护
[components][at] at_client适配新版serial_v2
[components][at] at_server适配新版serial_v2
[components][serial_v2] 测试用例增加循环调用，format测试用例
[components][serial_v2] poll模式判断逻辑错误
[components][serial_v2] 测试用例去掉一些非必要延时
[components][serial_v2] 测试例程使用menuconfig进行配置，更新readme
[components][at_client] at_client_getchar返回值错误、at_client解析线程优先级错误设置
[components][at] 错误码应该返回负值
[components][serial_v2] TCFLSH和FIONREAD完善、control函数增加错误返回值
[components][serial_v2] RT_SERIAL_CTRL_GET_RX_DATA_LEN更改为RT_SERIAL_CTRL_GET_UNREAD_BYTES_COUNT
[utest][serial_v2] TC_UART_SEND_TIMES替换为RT_SERIAL_TC_SEND_ITERATIONS
[components][serial_v2] FIONREAD参数应该是无符号类型
[utest][serial_v2] 完善测试用例
[components][serial_v2] 避免使用三目运算符
[components][serial_v2] 使用clang-format格式化代码
[components][serial_v2] 添加get超时时间命令
[components][serial_v2] 完善posix接口
[components][serial_v2] 阻塞接口添加阻塞时间为0时的处理逻辑、优化RX阻塞接收逻辑
[components][serial_v2] 设置超时时间命令的参数改为指针形式
[components][serial_v2] nbuf发送添加超时时间为0时的逻辑
[components][serial_v2] 完善添加测试用例
[utest][serial_v2] 修复依赖关系
[components][serial_v2] 非阻塞模式下tx_flush错误修复
[components][serial_v2] activated使用原子API
[components][serial_v2] 优化DMA逻辑、没使能DMA时屏蔽DMA逻辑节约资源
[components][serial_v2] 提供写满时丢弃新数据和覆盖旧数据策略，写满丢弃策略效率更高
[components][serial_v2] 部分平台适配写满时两种策略功能
[components][serial_v2] DMA模式暂不支持丢弃新数据策略
[utest][serial_v2] 优化测试代码
[components][serial_v2] DMA模式下使用乒乓缓冲、DMA模式支持丢弃新数据策略
[utest][serial_v2] 适配DMA乒乓缓冲
[bsp][serial_v2] 部分bsp适配DMA下乒乓缓冲
[components][serial_v2] 使用spinlock替换中断，对部分结构体变量使用原子操作
[utest][serial_v2] 更新测试用例
[components][at] 适配new serialv2不再判断RTT版本号
[components][at] 删除多余的中文注释
[utest][serial_v2] 添加交叉echo示例，qemu环境下专用
[bsp][qemu] 适配串口v2并开启fifo
[components][at] 修复合并导致的错误
[bsp][n32] 适配serial_v2，没有经过测试
[components][serial_v2] 格式化代码
[utest][serial_v2] 删除无意义的打印
|
|
* [building] rename the group name: LIBADT to Utilities.
|
|
RT_WLAN_EVT_SCAN_REPORT (#10237)
|
|
* rtthread 5.2适配
|
|
Fix garble caused by empty implementation of earlycon series
function in driver.If driver doesn't offer earlycon_id or rt_f
dt_earlycon_id.setup function but open option, the checking
of best_earlycon_id will failed.
Signed-off-by: 1078249029 <[email protected]>
|
|
If a node request a new node or it's parent node. the request's node will probe a double time.
So we check the device object of node in ofw probe entry and ofw probe child exit.
|
|
The first arg is src, then dst.
|
|
|
|
Signed-off-by: 1078249029 <[email protected]>
|
|
Signed-off-by: 1078249029 <[email protected]>
|
|
Signed-off-by: sakumisu <[email protected]>
|
|
Signed-off-by: sakumisu <[email protected]>
|
|
Added comments for data structure and rt_audio_ops in dev_audio.h.
Enriched comments for macro group. Moved and renamed folder audio.
Signed-off-by: 1078249029 <[email protected]>
|
