summaryrefslogtreecommitdiff
path: root/components/drivers
AgeCommit message (Collapse)Author
2023-01-08improve sensor framework (#6784)Man, Jianting (Meco)
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c * [sensor][cmd] add enter critical section protection * [sensor] add sensor reset command
2023-01-08[rt-smart] kernel virtual memory management layer (#6809)Shell
synchronize virtual memory system works. adding kernel virtual memory management layer for page-based MMU enabled architecture porting libcpu MMU codes porting lwp memory related codes
2023-01-07[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 (#6819)liYangYang
* [spi]attach 片选引脚依赖pin框架 * 修改attach函数
2023-01-05[drivers][serial_v2]修复DMA+TX阻塞模式异常 (#6781)wdfk-prog
* [drivers][serial_v2]修复DMA+TX阻塞模式异常
2023-01-02USB ↵kylongmu
CDC驱动在win11下无法识别，看了微软的描述修改子类后正常 (#6783) 这是微软关于此问题的链接: https://learn.microsoft.com/zh-cn/windows-hardware/drivers/usbcon/usb-driver-installation-based-on-compatible-ids#usbsersys-installation Windows 10 及更高版本 从 Windows 10 开始，Usbser.inf 已添加到 %Systemroot%\INF 目录，该目录加载 Usbser.sys 作为设备堆栈中功能设备对象 (FDO) 。 如果设备属于通信和 CDC 控制设备类， Usbser.sys 加载。 无需编写自己的 INF 来引用驱动程序。 驱动程序是基于与包含在 Windows 中的其他 USB 设备类驱动程序相似的兼容 ID 匹配来加载的。 USB\Class_02 USB\Class_02&SubClass_02 如果要自动 加载Usbser.sys， 在设备描述符中将类代码设置为 02，将子类代码 设置为 02。 有关详细信息，请参阅 USB 通信设备类。 使用此方法时，无需为设备分发 INF 文件，因为系统使用的是 Usbser.inf。 如果设备指定类代码 02，但子类代码值不是 02，则 Usbser.sys不会自动加载 。 即插即用管理器尝试查找驱动程序。 如果找不到合适的驱动程序，则设备可能未加载驱动程序。 在这种情况下，你可能需要加载自己的驱动程序或编写引用另一个内置驱动程序的 INF。
2022-12-26[sensor] add setting power/accuracy/fetch data mode commandsMeco Man
2022-12-26[sensor] 优化control参数检查和sensor list命令Meco Man
2022-12-26use PIN_IRQ_PIN_NONE to replace RT_PIN_NONEMeco Man
2022-12-26[sensor] add sensor list commandMeco Man
2022-12-26[sensor] add LSC chip vendorMeco Man
2022-12-26[sensor] set power and accuracy as the hightest levelMeco Man
2022-12-26[sensor] improve commandsMeco Man
2022-12-26fix compiling warning.bernard
2022-12-21[sensor] draft new sensor-hal framework (#6746)Man, Jianting (Meco)
* [sensor] new sensor framework 针对老版本sensor框架的诸多不合理设计进行重构 之前的PR中已经重构了浮点数相关的问题 本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除 * [sensor] 增加can modbus总线类型 * [stm32l745] 完善sensor对接 * [sensor] fix the onchip ID print
2022-12-20[smart/aarch64] code sync (#6750)Shell
* [smart/aarch64] sync aarch64
2022-12-16[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 (#6740)guo
* [dfs] sync cromfs * [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration * [format] fix some format issue.
2022-12-15fix:三字节读命令0x03，四字节读命令0x13，当命令为0x03需要 ↵joechenchen
加上0x10
2022-12-12[sensor] 增加新传感器类型和单位Meco Man
2022-12-13[components] fix compiling warning (#6733)Bernard Xiong
2022-12-11[sensor][cmd] add sensor_get_type/vender/unit_name functions (#6727)Man, Jianting (Meco)
* [sensor][cmd] add sensor_get_type/vender/unit_name functions * rename sensor folder
2022-12-11[rtdef] use lower-case to define attributes (#6728)Man, Jianting (Meco)
* [rtdef] rename RT_WEAK attribute as rt_weak * [rtdef] rename RT_USED attribute as rt_used * [rtdef] rename RT_SECTION attribute as rt_section * [rtdef] rename ALIGN attribute as rt_align * [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-12-11[sfud] sync commitMeco Man
https://github.com/armink/SFUD/commit/db9a1746df24142bd762378bc4e0dcf65b668b2d
2022-12-09[rtsmart] fix uart can't input after userapp exited at rv64 platform.guozhanxin
2022-12-07canfd帧结构加入 brs控制位 (#6701)Yohozzy
2022-12-05[fix]修复模拟i2c驱动延时bugjaffer
Signed-off-by: jaffer <[email protected]>
2022-12-03sync branch rt-smart. (#6641)guo
* Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <[email protected]> Co-authored-by: zhkag <[email protected]>
2022-11-21[CAN]update struct can_filter_item and rt_can_msg (#6556)wdfk-prog
* 修改ry命令，已便于自定义保存路径 * modified: components/utilities/ymodem/ry_sy.c * 修复从被动错误恢复后发送返回异常 * 修复在自动重传模式下,ACK异常阻塞线程 - 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断 - 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。 * 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数 * formatting格式化代码 * update struct can_filter_item and rt_can_msg 1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index, 以便准确区分.采用宏定义兼容以前变量名. 2. 添加接收标识rxfifo,已指明是哪个RXFIFO. * 更正42M下的波特率 * 修复接收获取索引号错误 * 添加接收标识 * 更新注释 * 取消CANFD限制 * update struct can_filter_item and rt_can_msg
2022-11-21[sensor] improve cmdMeco Man
using floating print format by default
2022-11-19add rt_sensor_float_tMeco Man
2022-11-19[sensor] 传感器数据类型使用float代替rt_uint32_t类型Meco Man
2022-11-14Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.cmyshow2258
Modified components/drivers/usb/usbdevice/class/cdc_vcom.c 修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
2022-11-14[sensor] use arg to replace user_dataMeco Man
2022-11-09[sensor] 修改fetch_data方法的参数数据类型为rt_sensor_data_tMeco Man
2022-11-09[sensor]修改传感器设备名称前缀Meco Man
2022-11-09[sensor] use rt_ssize_t as the return value data typeMeco Man
2022-11-08[sensor] 统一数据结构名称和函数命名Meco Man
2022-11-08[sdio] remove mmcsd_delay_msxiao xie
修改SD检测线程函数里面的延时实现，将mmcsd_delay_ms改为rt_thread_mdelay. mmcsd_delay_ms过时且延时计算错误。
2022-11-06[sensors] remvoe useless sensor.hMeco Man
2022-11-02bugfix: remove sdcard block dev may cause a constant loop.xiaoguang_ma
2022-10-15[bsp][c28x] 新增adc驱动 (#6520)YuQi
1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d 2. 新增adc驱动与kconfig配置
2022-10-12[DeviceDriver][serialv2] Support configure when serial is open.朱天龙 (Armink)
2022-10-10tshell is the default value of FINSH_THREAD_NAMEa1012112796
2022-10-09bug fixxiaoguang_ma
When detecting all SDIO devices fails, it is also necessary to return information
2022-09-25[TMS320F28379] implement PWM driver (#6457)YuQi
增加c28x芯片的pwm驱动 已经在TMS320F28379中通过测试 pwm设备框架增加如下方法： #define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8) #define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9) #define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10) #define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
2022-09-22[usbhost] List keyboard option. (#6456)Wayne
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. * [usbhost] List keyboard and update driver. * Enlarge to reasonable thread stack size. * Do indent.. * Keep private. Co-authored-by: Wayne Lin <[email protected]>
2022-09-20[fix] Fix simulator compilation warnings (#6438)Tangyuxin
* [fix] Fix simulator compilation warnings * Update bsp/simulator/rtconfig_project.h Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-09-09[modify]修改components/drivers/spi/sfud/README.md文件lhylhylhy6
2022-09-06[modify]修改waitqueue.c注释中的错误 (#6376)lhylhylhy6
2022-09-01[rt_drv_pwm]完善PWM框架互补输出部分代码 (#6338)liYangYang
* [pwm]Improve the code * 将与bsp无关的代码移植到框架部分 * 添加注释
2022-09-01[spi]fix some bug for rt_spi_sendrecv16 (#6360)liYangYang
修复 rt_spi_sendrecv16 api 对最高有效位(MSB or LSB)的处理不当造成的一些问题。 https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/SPI/src/SPI.cpp#L273
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-25 13:48:20 +0000