| Age | Commit message (Collapse) | Author |
|---|
|
|
|
the first time
|
|
|
|
|
|
|
|
The changes unify the tick.c implementations for all risc-v64
architectures, leveraging the CPUTIME feature. This refactoring was
necessary to streamline the codebase, and ensure consistent timer
handling across different platforms.
Changes:
- Updated `Kconfig` in `bsp/cvitek/cv18xx_risc-v` to fix formatting issues.
- Updated .config for BSPs to update `CPUTIME_TIMER_FREQ`
- Updated header of for API `riscv_cputime_init`
- Initialized riscv timer on `rt_hw_tick_init`
- Refactored `tick.c` and `tick.h` in `libcpu/risc-v/t-head/c906` and `libcpu/risc-v/virt64`:
- Replaced direct use of `rdtime` with `clock_cpu_gettime`.
- Removed redundant timer frequency definitions.
- Added static assertions to check the value of `CPUTIME_TIMER_FREQ`.
- Initialized `tick_cycles` based on `CPUTIME_TIMER_FREQ`.
- Integrated `ktime` support for tick initialization.
Signed-off-by: Shell <[email protected]>
Reviewed-on: https://github.com/RT-Thread/rt-thread/pull/9164
Reviewed-by: Chen Wang <[email protected]>
|
|
fix virtio net rx error
|
|
|
|
* 移除初始化时未进行引脚初始化就进行引脚设置可能导致的异常
* CS引脚配置判断完善
* xfer返回值优化
|
|
修复RX可能导致的内存溢出情况
#8634
|
|
Skip configure on open since all configs are copied from the current
configuration on device. So we don't bother to set it back to device
again.
Changes:
- test and skip configuration on open() of tty device
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
|
|
|
|
* fix(hpmicro): remove duplicate usb variable
* update(cherryusb): update to v1.3.1
|
|
[ktime] feat: remove recursion on hrtimer
Replace recursive algorithm with a loop in hrtimer
when determining next timeout event and setup hr timer.
Signed-off-by: Shell <[email protected]>
|
|
|
|
"dlmodule.c". (#9093)
|
|
|
|
* memory setup using memblock
* map pages later
|
|
|
|
(#8972)
* support period time
* enable multiple ktimer
* mv set delay_cnt to hrtimer_start
* add ktime debug info
* change current_irq_begin to local var
* fix bug: setting current timer and setting timeout in driver aren't atomicly
* create->init
* refactoring ktime
|
|
* add all soft timer
* update wq
* add timer test
* shield LOG_D
|
|
* legacy fdt
* update fdt
|
|
|
|
整理 components/drivers 的 Kconfig
|
|
Update sd.c
|
|
|
|
Update sd.c
|
|
|
|
|
|
|
|
* [DM/feature] Implement PIC irq state { get; set }
There are some common state for irq:
1. Pending: IRQ was triggered, but software not ACK.
2. Active: IRQ was ACK, but not EOI.
3. Masked: IRQ was masked or umasked.
Signed-off-by: GuEe-GUI <[email protected]>
* [DM/pic] Support IRQ state { get; set } for ARM GICv2/v3
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
fix compile err in pic-gic
|
|
|
|
* [Feature] Power domain for device
1.Support device power on/off.
2.Support attach/detach device.
3.Support power domain driver api.
Signed-off-by: GuEe-GUI <[email protected]>
* [DM/platform] Enhanced platform bus
1.Add power domain for device.
2.Support `remove` and `shutdown` bus interface.
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* 解决ktime部分函数计算时unsigned long溢出
* 恢复部分不需要ktime中部分rt_uint64_t类型的为unsigned long
|
|
- add parameter phy to specify multiple-phy instance
Signed-off-by: Jiading Xu <[email protected]>
|
|
[OFW] io ranges use ptr array to storage without ofw data
ofw data is private data for every ofw node that
the drivers of ofw node will use item.
replace the ranges supported to a ptr array.
the ptr array size is config by `RT_USING_OFW_BUS_RANGES_NUMBER`
Signed-off-by: GuEe-GUI <[email protected]>
|
|
For some CPU memory access devices, that the drivers
will find memory and CPU affinity to config device.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [PIC] Make affinity helper interface
Signed-off-by: GuEe-GUI <[email protected]>
* [PIC/GIC] Fixup GIC affinity init
GICv2 is not support if current CPU is not startup,
but RT-Thread SMP is startup after the devices init
in the `main` thread.
This patch fixup the cpumask to init once and check
the init status in affinity interface.
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
The OFW map id is always use in DMA, PCI, IOMMU
bus system to find the device identity. this is
a access interface.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
`map_len` and `map_mask_len` is the count of elements,
not the bytes size of elements.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
DFS mount auto by kernel parameters
1.Mount the rootfs options by parameters:
- root=: root device, like vda1, sda1, sd0p1, nvme0n0p1...
- rootfstype=: root file system type, like elm, ext, crom...
- rw/ro: root is readonly or all enable, if not have 'rw' flag,
the 'ro' flag is default.
- rootwait: always wait for root device status is OK.
- rootdelay=: mount rootfs delay amount of time (millisecond).
2.Mount the other fs options by `fstab.sh`, it will read the script
after root mount is OK, it's format is a list of mount cmds in MSH:
mount vda2 /mnt elm
mount 192.168.1.1:/ /mnt/remote nfs
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
- added SDR50, SDR104 and DDR50 support to SD driver
Signed-off-by: Fan YANG <[email protected]>
|
|
- added HS400 supprt (both eMMC5.0 and eMMC5.1 flavor are supported)
Signed-off-by: Fan YANG <[email protected]>
|
|
init dm serial naming framework in a phase
|
|
add isr statistics
|
