| Age | Commit message (Collapse) | Author |
|
|
|
为什么提交这份PR (why to submit this PR)
现在的at指令发送接口,底层会自动添加"\r\n",某些场景需要发送空指令。如ESP32的蓝牙发送数据指令,收到">"后
发数据,等待接收OK。
详细讨论可见:
https://club.rt-thread.org/ask/question/185810c0aed98558.html
你的解决方案是什么 (what is your solution)
判断at指令长度,长度为0,则直接返回
|
|
函数的输入超时参数的单位是ms, 系统接口无论1.x版本还是2.x, 最终都会将毫秒时间再去转一次tick, 用于rtthread邮件接收超时. 所以此处直接按原值进行转换,不需要加入对RT_TICK_PER_SECOND的转换
|
|
|
|
(#7504)
Co-authored-by: Wayne Lin <[email protected]>
|
|
fix issue #7005
|
|
|
|
|
|
|
|
|
|
|
|
|
|
修改了doxygen所报告的一些注释中的问题
|
|
|
|
|
|
* [DFS] prepare for dfs_v2. dfs_fd -> dfs_file; dfs_fnode -> dfs_vnode.
* [BSP] fix code analysis warning
* [smart] fix the pointer overflow.
* code format
* [smart] fix the lwp->lwp_obj checking.
|
|
|
|
(#7166)
|
|
1. prevent null-pointer dereference in rt_strcmp
|
|
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植
* -修改模板keil工程的配置,IROM需要注意总共为1024k,分为Code area 和Data area ,IRAM1为 : 512K-64K=448K=458752=0x70000。
-重新用ENV生成编译固件
片上SRAM可分为4块,分别为SRAM0(112KB)、SRAM1(16KB)、SRAM2(64KB)和TCMSRAM(64KB)。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问,然而,TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问。BKPSRAM(备份SRAM)应用于备份域,即使当VDD供电电源掉电时,该SRAM仍可保持其内容。附加SRAM(ADDSRAM)只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵,上述SRAM块可以同时被不同的AHB主机访问,例如,即使CPU正在访问SRAM0,USBHS也可以访问SRAM1。
* -修改IAR编译的链接脚本
* --修改Flash和RAM大小
-RAM大小为448k是因为512K-64K=448K,其中后面的64K为TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问,先不要乱分配
* -修改MDK链接脚本
* -修改board.h
* -修改MCU型号
* -Finsh控制台和LED1闪灯程序工作正常,串口控制台名称错误,从uart改为uart0
-Scons正常生成工程
* -发现GD32固件库当前没有240Mhz的时钟配置,将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04
* -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件
* -修改led1和change logs
* -按照提交规范使能 One ELF Section per Function(MDK) 并用scons重新生成工程
* -发现整个GD32的IAR模板工程template.eww 是没有的,所以当前是不支持IAR开发的,需要后面学习一下IAR使用再实现了。
* -使用formatting源码格式化工具跑一边gd32470z-lckfb目录
* -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c]
-三个月前的提交多了几个空格
|
|
|
|
* fix LWIP_HOOK_IP4_ROUTE_SRC.
* fix netdev ping select network card.
|
|
use __ARMCC_VERSION to replace __CC_ARM
|
|
|
|
|
|
|
|
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
|
|
|
|
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <[email protected]>
Co-authored-by: zhkag <[email protected]>
|
|
|
|
|
|
如果打印格式为"%02X"的数据大于0x7F,打印的数据就会在前面多出6个'F',原因详见https://blog.csdn.net/zqxwce821/article/details/53011925。
现在通过强制转换成unsigned char后,在STM32(KEIL5+C99)已测试确认能修复该问题。
|
|
* [fix] Fix simulator compilation warnings
* Update bsp/simulator/rtconfig_project.h
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
版本控制规范:https://semver.org/
目前的版本子号不是很规范,其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION 4L /**< major version number */
#define RT_SUBVERSION 1L /**< minor version number */
#define RT_REVISION 1L /**< revise version number */
```
参考ESP32:
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR 2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR 0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH 3
```
建议改成:
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR 4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR 2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH 0
```
|
|
* Fix some compilation warning
* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <[email protected]>
|
|
|
|
|
|
* [add] winsock implement on windows simulator.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* [lwip] 增加LWIP上游同步版本
* move pkgs to package repo
* add RT_USING_LWIP_LOCAL_VERSION to let users to decide whether can use upstream version of LwIP
* Update Kconfig
|