| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Numeric hostnames were copied into a fixed stack buffer without a length bound.
Cache the length, reject values that cannot fit, and terminate the copy explicitly.
Fixes #11332
Assisted-by: OpenAI Codex:GPT-5
|
|
|
|
|
|
detect_rust_target() 的 Cortex-M33 分支固定返回 thumbv8m.main-none-eabi，
没有使用同函数已计算的 hard_float，而 M4/M7 分支是判断的。
硬浮点 M33 板卡因此拿到软浮点 ABI 的 Rust 库，链接时报
"uses VFP register arguments" 并终止构建。
按 hard_float 选择 eabihf/eabi，与 M4/M7 分支保持一致。
|
|
Fix format specifier mismatches in blk_partition.c by using the
appropriate integer formats and explicit casts.
This removes -Wformat warnings on platforms where rt_uint32_t and
rt_size_t are represented as unsigned long.
|
|
|
|
|
|
|
|
NUM_MEM_REGIONS / NUM_CONFIGURABLE_REGIONS / NUM_EXCLUSIVE_REGIONS had no
Kconfig defaults. Enabling RT_USING_HW_STACK_GUARD without explicitly
setting them generated empty macros in rtconfig.h (e.g.
'#define NUM_CONFIGURABLE_REGIONS'), which expanded into invalid C
expressions like '(2 + )' and 'for (i = 0U; i < ; i++)', breaking
compilation for cortex-m4/m7/m33 MPU code.
Add safe defaults: NUM_MEM_REGIONS=8, NUM_CONFIGURABLE_REGIONS=0,
NUM_EXCLUSIVE_REGIONS=0. Also document the MemManage_Handler strong-symbol
conflict with CubeMX-generated stm32f4xx_it.c and how to resolve it.
Reported-by: wdfk-prog
|
|
The terminal subsystem's own headers (terminal.h, tty_config.h, ...) are
resolved by the compiler's quoted-include directory lookup for sources
inside components/lwp/terminal; nothing else depends on the path.
Stop polluting the global CPPPATH with this internal directory,
following the convention discussed in #10980.
|
|
|
|
|
|
|
|
|
|
When sal_socket() rejects a request, DFS v2 descriptor cleanup destroys the dfs_file but leaves its separately allocated vnode behind.
Destroy the vnode before releasing the failed descriptor and add a regression test that verifies repeated failures do not consume heap.
Fixes #11710
Assisted-by: OpenAI Codex:GPT-5
|
|
|
|
|
|
在 v1/v2 串口文件边界复制已知用户参数，补齐 v2 unread count 和 termios 缓冲区保护。
在 imx6ull UART 编程前校验波特率，并在硬件配置成功后提交串口状态。
|
|
Fix clang-format 22 alignment in loadavg macros, tmpfs setattr
mask wrap, and record-lock utest defines so the format CI passes.
|
|
Cover positive/negative l_len, overlapping GETLK conflicts,
interrupted F_SETLKW, split/merge, and close/dup2 lock release on
tmpfs.
|
|
Grow maps without a 256 VMA cap, skip RSS walks for maps, report
matching status text, real RSS/statm, MemAvailable after page-pool
free pages, load averages plus last PID, cumulative processes, RV32
cpuinfo, and per-character mount escaping.
|
|
If waiter allocation fails, mark the fd with POLLERR and wake
epoll_wait() instead of silently dropping the watch.
|
|
NULL read/write buffers now return -EFAULT. tmpfs setattr uses the
vnode-backed object after unlink, keeps S_ISUID/S_ISGID/S_ISVTX, and
the tmpfs utest checks ENAMETOOLONG plus post-unlink fchmod.
|
|
将 VirtIO Net 的依赖从 RT_USING_ETHERNET 调整为 RT_USING_LWIP。
避免 SMART QEMU 在未启用以太网抽象时无法选择网卡。
|
|
修复 epoll waiter 生命周期，避免等待队列节点在回调后失效。
整理 LWP POSIX syscall 的用户空间拷贝和错误返回路径。
|
|
补齐 procfs 中 cpuinfo、stat、uptime、loadavg、meminfo、mounts 和进程目录文件。
按架构和 SMP 配置隔离仅在对应平台有效的字段，避免非 AArch64/非 SMP 构建告警。
|
|
为 DFS v2 增加 POSIX 记录锁、fchmod，以及 tmpfs 的权限和时间元数据。
进程退出时通过 dfs_fdtable_drop_fd 释放文件描述符和记录锁。
|
|
netdev_cmd_ping 中 netdev 回退到 netdev_default 后未判空，
QEMU 无网卡环境下执行 ping 直接解引用 NULL 崩溃（data abort）。
回退后增加空指针检查，提示无可用网卡并返回错误。
|
|
|
|
Keep thread timer ownership when timer stop races with an in-flight timeout callback, and consume IPC resources only after a waiter is resumed successfully.
Complete ownership cleanup in the generic and RT-Smart channel timeout callbacks. Add deterministic scheduler and LWP regressions for Event, Semaphore, Mailbox, Message Queue, sender, and receiver paths.
|
|
Improve the Rust build integration across core, applications, components, and module examples. Fix build failure propagation, target and feature handling, linker flags, example configuration semantics, and add STM32 CI attach coverage.
|
|
The original overflow logic used __spm[tm_mon] as the current month's
length when normalizing tm_mday. This produced incorrect dates after
crossing month boundaries and left zero or negative days unnormalized.
Use the difference between adjacent cumulative day offsets with
leap-year handling. Normalize overflow in tm_sec, tm_min, tm_hour,
tm_mday, and tm_mon to keep the affected broken-down fields normalized.
Add regression tests for month boundaries, leap years, large offsets,
zero and negative days, negative time fields, combined overflow, and
boundary carry cases.
Close #11686
Signed-off-by: Hui Su <[email protected]>
|
|
|
|
* components/dfs: support unix socket nodes
AF_UNIX pathname binding and descriptor passing require DFSv2 socket
nodes and retained open file descriptions across fd tables.
Add socket-node creation for tmpfs and devtmpfs, fd reference helpers,
and socket F_SETFL forwarding.
Impact: DFSv2 socket nodes and descriptor reference handling.
Validation: git diff --cached --check.
* components/net/sal: support local protocol providers
Local IPC protocol families do not have a backing network device.
Store the selected provider in each SAL socket and add a local provider
registry while preserving netdev checks for Internet sockets.
Handle DFSv2 close semantics, socketpair flags, and MSG_CTRUNC for
AF_UNIX integration.
Impact: SAL protocol dispatch for all socket families.
Validation: git diff --cached --check.
* components/lwp: support unix socket messages
Musl AF_UNIX addresses and ancillary data require explicit ABI and
user-memory conversion at the LWP syscall boundary.
Add the musl msghdr layout, bounded address and message copying,
control-message level conversion, and MSG_CTRUNC translation. Correct
receive buffer allocation and copy lengths while handling messages.
Impact: LWP socket syscalls when SAL is enabled.
Validation: git diff --cached --check.
* components/net/af_unix: add local sockets
Add an opt-in AF_UNIX provider for pathname-based local IPC without
a synthetic network device.
Support datagram and stream sockets, blocking and nonblocking I/O,
timeouts, poll, socketpair, and SCM_RIGHTS descriptor passing. Include
bounded Kconfig settings, component documentation, and utest coverage.
Impact: enabled only by RT_USING_AF_UNIX and requires SAL POSIX with
DFSv2.
Validation: git diff --cached --check.
* Fix AF_UNIX CI checks
Apply the repository clang-format rules to the affected source lines.
Suppress the cppcheck false positive for the devtmpfs list iterator.
No functional behavior is changed.
* components/lwp: preserve NULL optional msghdr buffers
When msg_name or msg_control is NULL, keep the kernel pointer NULL
instead of substituting an uninitialized buffer. Reject a NULL control
buffer with a nonzero length as EFAULT.
Impact: LWP sendmsg/recvmsg conversion on MMU targets.
Validation: git diff --cached --check.
* components/net/af_unix: fix poll UAF, namespace leak, and SCM_RIGHTS cycles
Poll only the local wait queue and wake writers from the receiver.
Free namespace entries on detach, and reject AF_UNIX descriptors in
SCM_RIGHTS until cycle collection exists.
Impact: AF_UNIX poll, bind lifetime, and descriptor passing.
Validation: git diff --cached --check.
* components/dfs: add DFSv2 AF_UNIX utest suite
Add opt-in tests under dfs/utest/v2/af_unix for socket nodes, IPC,
poll peer-close, namespace cleanup, and SCM_RIGHTS rejection.
Sources are built only when RT_UTEST_TC_USING_DFS_V2_AF_UNIX and the
selected test groups are enabled.
Impact: DFS utest menu and build; no production AF_UNIX behavior change.
Validation: git diff --cached --check.
|
|
|
|
|
|
- reorganize common Raspberry Pi drivers under the device framework
- add the Raspberry Pi 5 BSP, configuration and documentation
- add BCM2712 and DesignWare AXI DMA controller support
- distinguish BCM2712 DMA32 and DMA40 channels by channel mask
- restore DesignWare AXI DMA enable bits after controller reset
- support a shared AXI maximum burst length across DMA channels
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/OFW][PCI] Fix address translation and PCI resource enumeration
Rework OFW address translation to walk nested bus ranges in the correct
direction and cache "ranges" and "dma-ranges" independently. Handle PCI
three-cell addresses without treating the PCI flags cell as part of the
address, and fix CPU-to-DMA and DMA-to-CPU translation across nested
buses.
Fix PCI BAR sizing and assignment by disabling address decoding during
probing, preserving BAR attribute bits, and programming 64-bit BARs
correctly. Add device enable and disable helpers so resources and bus
mastering are enabled before driver probe.
Program bridge memory and prefetch windows while scanning downstream
buses, correctly link child buses into the PCI bus hierarchy, and avoid
unnecessary PCIe link retraining when the link is already active.
Allow host bridges without a device-tree pci-domain property by
allocating unique domains dynamically, while preserving explicit domain
assignments.
Fix MSI and MSI-X IRQ setup, rollback, vector addressing, and affinity
selection.
Add the Raspberry Pi PCI vendor ID for RP1 and other downstream devices.
Signed-off-by: GuEe-GUI <[email protected]>
* style: format code with clang-format
* style: format complete changed files with clang-format
* drivers: pci: address OFW review feedback
* style: format PCI and OFW changes for current master
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [dm][dma] update DMA interface
Extend DMA mapping to honor OFW dma-ranges even
when no reserved memory pool is present,
and add PCI host-bridge DMA-region translation for PCI devices.
Prefer 32-bit-addressable allocations for translated devices,
improve pool allocation fallbacks and synchronization,
and establish a linear mapping for installed DMA pools when possible.
Signed-off-by: GuEe-GUI <[email protected]>
* [dm][dma] fixup PL330 work flow
Fix PL330 channel allocation so device-tree cells
select peripheral request lines rather than execution channels.
Generate proper peripheral DMA microcode using DMAWFP, DMALDP, DMASTP, and DMAFLUSHP,
encode burst lengths correctly,
honor transfer direction and non-secure attributes,
and allocate microcode from DMA-coherent memory.
Signed-off-by: GuEe-GUI <[email protected]>
* style: format code with clang-format
* style: format complete changed files with clang-format
* drivers: dma: fix diagnostic format types
* style: format DMA changes for current master
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/Input] Add ADC joystick, keyboard, and touchscreen drivers
Add polling input drivers for ADC-connected joysticks and resistor-
ladder keys. Parse Linux-compatible device-tree bindings, acquire ADC
channels through the IIO framework, and report absolute-axis and key
events.
Add an SPI touchscreen driver for ADS7843, ADS7845, ADS7846, ADS7873,
TSC2046, and XPT2046-compatible controllers. Support pen interrupts,
coordinate and pressure reporting, sample filtering, regulator control,
power management, and common touchscreen properties.
Add an I2C touchscreen driver for Goodix GT9xx controllers with
multi-touch reporting, GPIO-based reset and address selection, interrupt
handling with polling fallback, regulator control, panel configuration,
and alternate-address recovery.
Adapt the drivers to the RT-Thread device model and input framework,
following the corresponding Linux input drivers and device-tree
bindings.
Signed-off-by: GuEe-GUI <[email protected]>
* style: format code with clang-format
* drivers: input: address review feedback
* style: format input changes for current master
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
|
|
|
|
|
|
Add the ARM NVIC PIC driver, no-MMU I/O mapping, built-in FDT support, and Cortex-M CPU hooks required by the native RT-Thread device model.
|
|
|
|
* [dm][clk] fixup the work flow of CLK
Add RT_CLK_F_SET_RATE_NO_REPARENT so clock providers can preserv
the currently selected parent during rate changes.
Round and re-read the effective clock rate after parent handling,
skip redundant gate toggles and hardware programming when
the target is already active, and fix error handling for parent-clock allocation failures.
Signed-off-by: GuEe-GUI <[email protected]>
* style: format code with clang-format
* style: format complete changed files with clang-format
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [dm][phye] Add Mode/State and MIPI D-PHY timing helper
Extend the generic PHY framework with cached mode and submode state,
avoiding redundant hardware mode changes.
Add MIPI D-PHY default timing calculation helpers based on
pixel clock or lane high-speed clock, and expose the new API through rtdevice.h.
Signed-off-by: GuEe-GUI <[email protected]>
* style: format code with clang-format
* style: format complete changed files with clang-format
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [dm][regulator] update regulator
Replace the regulator framework spinlock with a mutex
because regulator operations may sleep.
Move always-on policy into the regulator core,
keep an initial enable reference for always-on supplies,
prevent the last disable from turning them off,
and let fixed/GPIO providers report and control their actual hardware state.
Signed-off-by: GuEe-GUI <[email protected]>
* [dm][regulator] add PWM regulator support
Signed-off-by: GuEe-GUI <[email protected]>
* style: format code with clang-format
* style: format complete changed files with clang-format
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
