| Age | Commit message (Collapse) | Author |
|---|
|
1.Add the necessary function declarations for SMP enablement and implement the corresponding
functionalities, including rt_hw_secondary_cpu_up, secondary_cpu_entry, rt_hw_local_irq_disable,
rt_hw_local_irq_enable, rt_hw_secondary_cpu_idle_exec, rt_hw_spin_lock_init, rt_hw_spin_lock,
rt_hw_spin_unlock, rt_hw_ipi_send, rt_hw_interrupt_set_priority, rt_hw_interrupt_get_priority,
rt_hw_ipi_init, rt_hw_ipi_handler_install, and rt_hw_ipi_handler.
2.In the two functions (rt_hw_context_switch_to and rt_hw_context_switch) in context_gcc.S,
add a call to rt_cpus_lock_status_restore to update the scheduler information.
3.If the MMU is enabled, use the .percpu section and record different hartids by configuring
special page tables; if the MMU is not enabled, record them directly in the satp register.
Additionally, add dynamic startup based on core configuration.The .percpu section is only used
when both ARCH_MM_MMU and RT_USING_SMP are enabled. However, there is a certain amount of space
waste since no macro guard is added for it in the link script currently.
4.The physical memory of QEMU started in CI is 128MB, so RT_HW_PAGE_END is modified from the
original +256MB to +128MB. Modify the SConscript file under the common64 directory to include
common/atomic_riscv.c in the compilation process.
Signed-off-by: Mengchen Teng <[email protected]>
|
|
|
|
|
|
|
|
RISCV_S_MODE configuration only affects the code in
libcpu/risc-v/virt64, and the only bsp using this
libcpu is qemu-virt64-riscv.
Considering s-mode is the default mode RT-Thread
running on virt64 machine, it seems unnecessary to
make RISCV_S_MODE a Kconfig option.
Solution: Remove RISCV_S_MODE from Kconfig and define
it as a macro in the code in libcpu/risc-v/virt64.
Plus, due to this macro is only related to virt64, rename
RISCV_S_MODE to RISCV_VIRT64_S_MODE.
Update the .config/rtconfig.h in this patch.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
|
|
Changes:
- create new folder name `common64` and save all common codes of rv64
inside
Signed-off-by: Shell <[email protected]>
|
|
This patch consolidates the separated architecture-specific code for
rv64 (virt64 and c906) under a more unified approach. The changes
aim to enhance maintainability and code reuse, reducing duplication
between these two architectures while adding small improvements in
porting compatibility.
Changes:
- Modified build scripts (SConscript) for both virt64 and c906 to
remove ASID and vector dependencies when not required.
- Updated c906's sbi.c and sbi.h to use standard integer types
(uint32_t) and include the missing <stdint.h> header.
- Unified inline function declaration for `sbi_call` across both
c906 and virt64 using `rt_inline`.
- Disabled FPU and vector in c906's startup assembly file, aligning it
with the virt64 handling.
- Corrected syscall handler type definitions in c906 for consistency.
Signed-off-by: Shell <[email protected]>
|
|
This patch aims to unify the two currently separated RISC-V 64-bit
architecture ports, 'virt64' and 'c906', into a single generic
'common64' port. The changes include renaming files and updating
includes to use a unified 'interrupt.h' header, as well as making
adjustments to IO and trap handling to be more consistent between the
two architectures.
Changes:
- Renamed 'rt_interrupt.h' to 'interrupt.h' and updated includes accordingly.
- Unified IO register access functions in 'riscv_io.h'.
- Added 'opcode.h' for portable assembly support.
- Updated 'plic.c' and 'plic.h' to handle interrupts in a unified manner.
- Modified 'trap.c' to handle exceptions and interrupts consistently for 'rv64'.
Signed-off-by: Shell <[email protected]>
|
|
These changes are designed to standardize the memory management across
'virt64' and 'c906', ensuring efficient handling of address spaces and
page tables.
Changes:
- Creation of ASID management files (`asid.c`) for both 'c906' and
'virt64' architectures, which is essential for maintaining stability.
- Extensive updates to the MMU configuration and handling in `mmu.c` and `mmu.h` files.
- Addition of functions to manage ASID allocation and switching of page tables.
- For c906, accommodated the early memory setup to the one from virt64.
Signed-off-by: Shell <[email protected]>
|
|
Changes:
- added config for NEW_CTX_SWITCH
- used new context on c906 sched switch routine
- update _rt_hw_stack_init to fit into NEW_CTX_SWITCH
- separated vector ctx from the generic
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
The changes unify the tick.c implementations for all risc-v64
architectures, leveraging the CPUTIME feature. This refactoring was
necessary to streamline the codebase, and ensure consistent timer
handling across different platforms.
Changes:
- Updated `Kconfig` in `bsp/cvitek/cv18xx_risc-v` to fix formatting issues.
- Updated .config for BSPs to update `CPUTIME_TIMER_FREQ`
- Updated header of for API `riscv_cputime_init`
- Initialized riscv timer on `rt_hw_tick_init`
- Refactored `tick.c` and `tick.h` in `libcpu/risc-v/t-head/c906` and `libcpu/risc-v/virt64`:
- Replaced direct use of `rdtime` with `clock_cpu_gettime`.
- Removed redundant timer frequency definitions.
- Added static assertions to check the value of `CPUTIME_TIMER_FREQ`.
- Initialized `tick_cycles` based on `CPUTIME_TIMER_FREQ`.
- Integrated `ktime` support for tick initialization.
Signed-off-by: Shell <[email protected]>
Reviewed-on: https://github.com/RT-Thread/rt-thread/pull/9164
Reviewed-by: Chen Wang <[email protected]>
|
|
|
|
* [rv/virt/stackframe.h]添加GP寄存器保存偏移量宏
* 【rv/c906/stackframe.h]定义GP寄存器存储偏移量
* [rv]信号处理切换到用户态前恢复gp
|
|
* [libcpu] support for ARCH_REMAP_KERNEL
These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.
Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
updates to early page table setup and address relocation logic.
These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.
Signed-off-by: Shell <[email protected]>
* fixup: CI run failed
* bsp: default config without using smart
* fixup: static checks
* restore rt_hw_mmu_kernel_map_init for D1
---------
Signed-off-by: Shell <[email protected]>
|
|
[feat] Enhance support for backtrace service
rt_backtrace_formatted_print() and rt_backtrace_to_buffer() to help
debug routines.
Also, following modification are included:
- make rt_backtrace_frame patchable with weak attr
- replace lwp backtrace with sync output
Signed-off-by: Shell <[email protected]>
|
|
* [smart] fixup: precise mm fault type
Also, fixup arm64 read access fault
* arm64: using meaningful macro on trap
* fixup: renaming macro
|
|
* [libcpu] rv64: discard rt_current_thread
* arm: using rt_thread_self to fetch current TCB
|
|
Signed-off-by: Shell <[email protected]>
|
|
Signed-off-by: Shell <[email protected]>
Co-authored-by: xqyjlj <[email protected]>
|
|
|
|
|
|
|
|
Signed-off-by: Shell <[email protected]>
|
|
Signed-off-by: Shell <[email protected]>
|
|
|
|
Signed-off-by: shell <[email protected]>
Signed-off-by: shell <[email protected]>
Signed-off-by: Shell <[email protected]>
|
|
Signed-off-by: Shell <[email protected]>
|
|
and remvoe duplicated default functions in each cpu/bsp level
|
|
因为tick从中断到设置中间的时延特别大，因此暂不采用tick做基准时间，直接取gtime的cnt做基准时间
|
|
|
|
|
|
|
|
* [utest/mm] add testcase for create/init
format codes of create/init in components/mm
* [libcpu/aarch64] fix user stack check routine
* [kservice] export API for utest
* [utest/mm] testcase for aspace_map
format & modify the files under components/mm related with aspace_map
* [lwp/user_mm] add user_map_varea for mmap feature
* [mm] rename rt_mm_fault_try_fix to rt_aspace_fault_try_fix
* [utest/mm] testcase for synchronization
* [mm] modify unmap api to improve throughput
* [utest/mm] testcases for cache and varea map
* [format] remove extra space
* [utest/mm] fix testcase problem in header
* [lwp] extend map_user_varea with a flag
* [utest/mm] testcase for lwp_map_user_varea
* [libcpu/arm/cortex-a] fix kernel space layout
* [utest/mm] adjust for armv7 arch
|
|
* Update Kconfig
* Update trap_gcc.S
* Update bsp/hifive1/drivers/SConscript
Co-authored-by: Man, Jianting (Meco) <[email protected]>
* Update SConscript
* [atomic]提交一份arm与risc-v架构下的常用原子操作函数
* 修改变量类型
* 更新rtatomic.h与atomic_port.c
* 更新rt-thread\libcpu\arm\common\atomic_port.c
* 更新include/rtatomic.h与libcpu/arm/common/SConscript
* 更新include/rtatomic.h
* 修正格式与Kconfig
* 修正格式与文件结构
* 规范文件格式与文件重命名
* 添加测试用例与CI
* 添加函数声明
* 修改virt64/SConscript 添加atomic_riscv.c
* 1.规范代码风格
* 2.添加RISC-V64原子指令支持 解决在RV64下编译器将32-bit运算结果扩展为64-bit 导致判断错误
* 添加C11标准库原子操作测试
---------
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
* [syscall] move sys_cacheflush to lwp_syscall.c
* [syscall] improve assertion
* [format] rename to rt_ctassert
* [debug] modified ct assertion on mm_page.c
|
|
* [libcpu/risc-v] support noncached normal memory
* [mm] check before dereference in _fetch_page
* [mm] add comments on ioremap
* [ioremap] report more info on failed
|
|
|
|
[rt-smart] handling kernel from accessing unmapped user stack
|
|
fix bugs on cache maintenance when starting user app
|
|
* [rt-smart/mem] remove pv_offset
* [rt-smart] list kernel space command
* [rt-smart] restore ioremap region
* [revert] restore kernel space isolation
* [rt-smart/pv_off] code format
* [rt-smart] add get_pvoff()
* [pvoffset] pvoff as constant for C codes
* [pvoff] pvoff as interfaces
|
|
* [rv64/bsp] porting to mm
* [mm] report more info for debugging
* [fix] code format
* [libcpu/c906] porting to RTOS
* [fix] using rtdbg api
* [fix] add return
* [fix] report more information for debugging
* [fix] use assert 0 for unrecoverable error
|
|
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
|
|
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
|
|
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
|
|
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <[email protected]>
Co-authored-by: zhkag <[email protected]>
|
|
|
