| Age | Commit message (Collapse) | Author |
|---|
|
Co-authored-by: Rbb666 <[email protected]>
|
|
|
|
|
|
|
|
|
|
|
|
memory access
|
|
|
|
|
|
修正对RV32E的支持，RV32E不支持s2寄存器，修改为s1寄存器
|
|
|
|
is located
|
|
libcpu/risc-v/common64/mmu.c uses the external
symbol "__bss_end" (this symbol generally is
defined in the link script file) and depends
on the extern declaration of this symbol in
the bsp's "board.h". This is not a problem in
implementation, but it is not a good habit.
If this extern symbol is used locally, just
declare it locally should be better.
In this way, there will be no dependency of
the kernel core on the bsp header file. And
there will be no special requirements for the
bsp board code, such as the need to make
extern declarations for these "__bss_end"
symbols in "board.h".
This patch currently only explicitly externly
declares "__bss_end" inside libcpu itself.
The code of "#include <board.h>" is kept, because
the modification involved is too large, it is
necessary to clean up the bsp involved before
cleaning this include code line uniformly.
Signed-off-by: Chen Wang <[email protected]>
|
|
* libcpu: cleanup undefined rt_hw_mmu_kernel_map_init
rt_hw_mmu_kernel_map_init() is declared in header files but
no definition found, cleanup the code.
Signed-off-by: Chen Wang <[email protected]>
* bsp: allwinner: d1: remove calling of rt_hw_mmu_kernel_map_init
rt_hw_mmu_kernel_map_init is an undefined function, calling it
is meaningless.
Signed-off-by: Chen Wang <[email protected]>
---------
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
Signed-off-by: ligr <[email protected]>
|
|
|
|
|
|
|
|
|
|
description: Using the vector instruction set to trigger
an illegal instruction exception when ARCH_SISCV_VECTOR=y.
analysis: When initializing the thread stack,
the rt_cw_stack_init function did not enable VS for SSTATUS.
Solution: When ARCH_SISCV_VECTOR=y,
increment the initial value of sstatus by 0x600(SSTATUS_VS).
Signed-off-by: Liu Gui <[email protected]>
|
|
When building bsp/cvitek/c906_little, compiler reports:
```
.../rt-thread/libcpu/risc-v/rv64/trap.c:
In function 'handle_trap':
.../rt-thread/libcpu/risc-v/rv64/trap.c:106:13:
warning: implicit declaration of function 'rt_hw_tick_isr';
did you mean 'rt_hw_stack_init'? [-Wimplicit-function-declaration]
106 | rt_hw_tick_isr();
| ^~~~~~~~~~~~~~
| rt_hw_stack_init
.../rt-thread/libcpu/risc-v/rv64/trap.c:110:13:
warning: implicit declaration of function 'rt_hw_irq_isr';
did you mean 'rt_hw_soft_irq_isr'? [-Wimplicit-function-declaration]
110 | rt_hw_irq_isr();
| ^~~~~~~~~~~~~
| rt_hw_soft_irq_isr
```
rt_hw_tick_isr()/rt_hw_irq_isr() are implemented by bsp, but
libcpu/risc-v/rv64 doesn't declare them, so compiler warns.
There are three BSPs using 'rv64' (libcpu/risc-v/rv64):
- `bsp/cvitek/c906_little/rtconfig.py`
- `bsp/juicevm/rtconfig.py`
- `bsp/k210/rtconfig.py`
`handle_trap` in `libcpu/risc-v/rv64` is defined as weak.
BSP can use this function directly or define and overload
it by itself.
If bsp use this function directly, bsp need to pay
attention to the fact that three functions will be called
in this function:
- `rt_hw_soft_irq_isr`
- `rt_hw_tick_isr`
- `rt_hw_irq_isr`
In `libcpu/risc-v/rv64`, `rt_hw_soft_irq_isr` has a weak
definition, while the other two do not. This means that
if the bsp does not overload `handle_trap`, bsp must
define `rt_hw_tick_isr` and `rt_hw_irq_isr` itself.
This is also the practice of `bsp/cvitek/c906_little`.
There is also a similar bsp `bsp/k210`, and the form of
`bsp/juicevm` implements `handle_trap` by itself.
It seems that `rt_hw_tick_isr` and `rt_hw_irq_isr` are
not required to be implemented by all BSPs using
`libcpu/risc-v/rv64`. The premise for BSP to implement
them is that it does not overload `handle_trap`. So
declaring `rt_hw_tick_isr` and `rt_hw_irq_isr` with
extern in `libcpu/risc-v/rv64` is not proper.
In addition, the `rt_hw_tick_isr/rt_hw_irq_isr` are only
used by `libcpu/risc-v/rv64`, so it is not worth putting
the declaration in `./include/rthw.h`.
Sum up, the best solution is to add weak definition to
`rt_hw_tick_isr/rt_hw_irq_isr` as existing `rt_hw_soft_irq_isr`.
Signed-off-by: Chen Wang <[email protected]>
|
|
When building bsp/cvitek/c906_little, compiler warns:
```
.../rt-thread/libcpu/risc-v/common/trap_common.c:
In function 'rt_hw_interrupt_install':
.../rt-thread/libcpu/risc-v/common/trap_common.c:50:11:
warning: unused variable 'user_param' [-Wunused-variable]
50 | void *user_param = param;
| ^~~~~~~~~~
.../rt-thread/libcpu/risc-v/common/trap_common.c:
In function 'rt_rv32_system_irq_handler':
.../rt-thread/libcpu/risc-v/common/trap_common.c:77:25:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
77 | s_stack_frame = (rt_hw_stack_frame_t *)mscratch;
| ^
```
Fixed these warnings as per indication from gcc.
Signed-off-by: Chen Wang <[email protected]>
|
|
RISCV_S_MODE configuration only affects the code in
libcpu/risc-v/virt64, and the only bsp using this
libcpu is qemu-virt64-riscv.
Considering s-mode is the default mode RT-Thread
running on virt64 machine, it seems unnecessary to
make RISCV_S_MODE a Kconfig option.
Solution: Remove RISCV_S_MODE from Kconfig and define
it as a macro in the code in libcpu/risc-v/virt64.
Plus, due to this macro is only related to virt64, rename
RISCV_S_MODE to RISCV_VIRT64_S_MODE.
Update the .config/rtconfig.h in this patch.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[libcpu]添加对riscv vector的支持
|
|
* (fix) mmu: satp value should be 64-bit
Corrected the SATP register to ensure it uses the correct 64-bit format as required by the system architecture.
* use __asm__ instead of asm for the GNU C compiler
Co-authored-by: Shell <[email protected]>
---------
Co-authored-by: Shell <[email protected]>
|
|
cpu is in exception (#9516)
Remove redundant '0x' from printed output
|
|
|
|
|
|
|
|
|
|
Changes:
- create new folder name `common64` and save all common codes of rv64
inside
Signed-off-by: Shell <[email protected]>
|
|
This patch consolidates the separated architecture-specific code for
rv64 (virt64 and c906) under a more unified approach. The changes
aim to enhance maintainability and code reuse, reducing duplication
between these two architectures while adding small improvements in
porting compatibility.
Changes:
- Modified build scripts (SConscript) for both virt64 and c906 to
remove ASID and vector dependencies when not required.
- Updated c906's sbi.c and sbi.h to use standard integer types
(uint32_t) and include the missing <stdint.h> header.
- Unified inline function declaration for `sbi_call` across both
c906 and virt64 using `rt_inline`.
- Disabled FPU and vector in c906's startup assembly file, aligning it
with the virt64 handling.
- Corrected syscall handler type definitions in c906 for consistency.
Signed-off-by: Shell <[email protected]>
|
|
This patch aims to unify the two currently separated RISC-V 64-bit
architecture ports, 'virt64' and 'c906', into a single generic
'common64' port. The changes include renaming files and updating
includes to use a unified 'interrupt.h' header, as well as making
adjustments to IO and trap handling to be more consistent between the
two architectures.
Changes:
- Renamed 'rt_interrupt.h' to 'interrupt.h' and updated includes accordingly.
- Unified IO register access functions in 'riscv_io.h'.
- Added 'opcode.h' for portable assembly support.
- Updated 'plic.c' and 'plic.h' to handle interrupts in a unified manner.
- Modified 'trap.c' to handle exceptions and interrupts consistently for 'rv64'.
Signed-off-by: Shell <[email protected]>
|
|
These changes are designed to standardize the memory management across
'virt64' and 'c906', ensuring efficient handling of address spaces and
page tables.
Changes:
- Creation of ASID management files (`asid.c`) for both 'c906' and
'virt64' architectures, which is essential for maintaining stability.
- Extensive updates to the MMU configuration and handling in `mmu.c` and `mmu.h` files.
- Addition of functions to manage ASID allocation and switching of page tables.
- For c906, accommodated the early memory setup to the one from virt64.
Signed-off-by: Shell <[email protected]>
|
|
Changes:
- added config for NEW_CTX_SWITCH
- used new context on c906 sched switch routine
- update _rt_hw_stack_init to fit into NEW_CTX_SWITCH
- separated vector ctx from the generic
Signed-off-by: Shell <[email protected]>
|
|
|
|
1. 修改 ENABLE_FPU 为 ARCH_RISCV_FPU，与libcpu/common 保持统一
2. 对 bsp/cvitek/cv18xx_risc-v 中增加使能 ARCH_RISCV_FPU 的动作。解决了 issue #9075
|
|
|
|
|
|
|
|
* [bsp][hpmicro] add weak handle_trap implementation
- added weak handle_trap implementation
Signed-off-by: Fan YANG <[email protected]>
* [libcpu][risc-v][common] remove weak handle_trap function
- removed weak handle_trap function from trap_common.c
Signed-off-by: Fan YANG <[email protected]>
---------
Signed-off-by: Fan YANG <[email protected]>
|
|
The changes unify the tick.c implementations for all risc-v64
architectures, leveraging the CPUTIME feature. This refactoring was
necessary to streamline the codebase, and ensure consistent timer
handling across different platforms.
Changes:
- Updated `Kconfig` in `bsp/cvitek/cv18xx_risc-v` to fix formatting issues.
- Updated .config for BSPs to update `CPUTIME_TIMER_FREQ`
- Updated header of for API `riscv_cputime_init`
- Initialized riscv timer on `rt_hw_tick_init`
- Refactored `tick.c` and `tick.h` in `libcpu/risc-v/t-head/c906` and `libcpu/risc-v/virt64`:
- Replaced direct use of `rdtime` with `clock_cpu_gettime`.
- Removed redundant timer frequency definitions.
- Added static assertions to check the value of `CPUTIME_TIMER_FREQ`.
- Initialized `tick_cycles` based on `CPUTIME_TIMER_FREQ`.
- Integrated `ktime` support for tick initialization.
Signed-off-by: Shell <[email protected]>
Reviewed-on: https://github.com/RT-Thread/rt-thread/pull/9164
Reviewed-by: Chen Wang <[email protected]>
|
|
feat: [libcpu/c906] support ARCH_REMAP_KERNEL
This change was necessary to enable the remapping of the kernel image to
a high virtual address region on the c906 platform.
Changes:
- Introduced new configuration options `ARCH_REMAP_KERNEL`, and
`ARCH_USING_ASID` under the `ARCH_RISCV64` section.
- Updated MMU initialization and switching functions to incorporate
remapping handling.
- Modified page table setup for proper memory attribute settings.
- Added support for early memory setup, kernel remapping
- Added conditional compilation for ASID support in the `rt_aspace` struct,
since this is not enable currently for most architecture.
Signed-off-by: Shell <[email protected]>
|
