From 12db11ad51a2ea59b6fc982da77cb5b71bedcabc Mon Sep 17 00:00:00 2001 From: ArdaFu Date: Tue, 9 Aug 2016 11:36:32 +0800 Subject: [trace] rename the readme file. --- components/trace/how to use.md | 23 ----------------------- components/trace/readme.md | 23 +++++++++++++++++++++++ 2 files changed, 23 insertions(+), 23 deletions(-) delete mode 100644 components/trace/how to use.md create mode 100644 components/trace/readme.md diff --git a/components/trace/how to use.md b/components/trace/how to use.md deleted file mode 100644 index 6a3dfa31f0..0000000000 --- a/components/trace/how to use.md +++ /dev/null @@ -1,23 +0,0 @@ -##How to use the Segger SystemView trace componment ------- -### 1. Copy description file -Copy the '.\SystemView_Src_Vxxx\Description\SYSVIEW_RTThread.txt' to folder '%SystemView_Install_Folder%\Description\'. -### 2. Enable trace componment -Add `RT_USING_TRACE` define in your bsp's rtconfig.h -```c -// -#define RT_USING_TRACE -``` -### 3. Connect to target board debug interface -Segger SystemView only support Segger J-Link and Segger J-Link OB. If you using the origin development boards from vendor, you can upgrade the on board debugger to J-Link OB. - -* For ST ST-Link, here is the [ST-Link upgrade utility download page](https://www.segger.com/jlink-st-link.html) -* For Atmel EDBG, here is the [EDBG upgrade utility download page](https://www.segger.com/jlink-edbg.html) -* For Freescale(NXP) OpenSDA/OpenSDA-V2, here is the [OpenSDA upgrade utility download page](https://www.segger.com/opensda.html) -* For NXP LPC Link 2, here is the [LPC link 2 upgrade utility download page](https://www.segger.com/lpc-link-2.html) -* NXP LPCXpresso, here is the [LPC link 2 upgrade utility download page](https://www.segger.com/jlink-lpcxpresso-ob.html) - -### 4. Intergration (Porting) limitation - -* Can only trace thread, scheduler and interrupt. -* Tracing RT-Thread IPC componment is not supported. diff --git a/components/trace/readme.md b/components/trace/readme.md new file mode 100644 index 0000000000..6a3dfa31f0 --- /dev/null +++ b/components/trace/readme.md @@ -0,0 +1,23 @@ +##How to use the Segger SystemView trace componment +------ +### 1. Copy description file +Copy the '.\SystemView_Src_Vxxx\Description\SYSVIEW_RTThread.txt' to folder '%SystemView_Install_Folder%\Description\'. +### 2. Enable trace componment +Add `RT_USING_TRACE` define in your bsp's rtconfig.h +```c +// +#define RT_USING_TRACE +``` +### 3. Connect to target board debug interface +Segger SystemView only support Segger J-Link and Segger J-Link OB. If you using the origin development boards from vendor, you can upgrade the on board debugger to J-Link OB. + +* For ST ST-Link, here is the [ST-Link upgrade utility download page](https://www.segger.com/jlink-st-link.html) +* For Atmel EDBG, here is the [EDBG upgrade utility download page](https://www.segger.com/jlink-edbg.html) +* For Freescale(NXP) OpenSDA/OpenSDA-V2, here is the [OpenSDA upgrade utility download page](https://www.segger.com/opensda.html) +* For NXP LPC Link 2, here is the [LPC link 2 upgrade utility download page](https://www.segger.com/lpc-link-2.html) +* NXP LPCXpresso, here is the [LPC link 2 upgrade utility download page](https://www.segger.com/jlink-lpcxpresso-ob.html) + +### 4. Intergration (Porting) limitation + +* Can only trace thread, scheduler and interrupt. +* Tracing RT-Thread IPC componment is not supported. -- cgit v1.3.1