menu "Hardware Drivers Config"

config SOC_XMC7100D_F144K4160AA
    bool
    select SOC_SERIES_IFX_XMC
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

menu "Onboard Peripheral Drivers"

    config BSP_USING_USB_TO_USART
        bool "Enable USB TO USART (uart4)"
        select BSP_USING_GPIO
        select BSP_USING_UART
        select BSP_USING_UART4
        default y
    menuconfig BSP_USING_TF_CARD
        bool "Enable TF_CARD"
        select BSP_USING_SPI
        select RT_USING_SPI_MSD
        select RT_USING_DFS
        select RT_USING_DFS_DEVFS
        select RT_USING_DFS_ELMFAT
        default n
        if BSP_USING_TF_CARD
            config BSP_USING_SPI_FLASH
                bool "Using SPI TO SDCARD"
                default y
        endif
    config BSP_USING_QMI8658
        bool "Enable QMI8658"
        select BSP_USING_I2C
        select PKG_USING_QMI8658
        default n

    menuconfig BSP_USING_ARDUINO
        bool "Compatible with Arduino Ecosystem (RTduino)"
        default n
        select PKG_USING_RTDUINO
        select BSP_USING_UART2
        select BSP_USING_GPIO
        select BSP_USING_I2C
        select BSP_USING_HW_I2C2
        select BSP_USING_SPI
        select BSP_USING_SPI0
        imply RTDUINO_USING_SERVO
        imply RTDUINO_USING_WIRE
        imply RTDUINO_USING_SPI
        if BSP_USING_ARDUINO
            menuconfig BSP_USING_ARDUINO_RTDUINO_SENSORFUSION_SHIELD
                bool "Enable ARDUINO RTDUINO SENSORFUSION SHIELD"
                default n
                select PKG_USING_ARDUINO_RTDUINO_SENSORFUSION_SHIELD
                select PKG_ARDUINO_RTDUINO_SENSORFUSION_SHIELD_DEMO
                if BSP_USING_ARDUINO_RTDUINO_SENSORFUSION_SHIELD
                    config BSP_USING_RTDUINO_SENSORFUSION_SHIELD_BMP280_DEMO
                        bool "Enable RTDUINO SENSORFUSION SHIELD BMP280 DEMO"
                        select PKG_RTDUINO_SENSORFUSION_SHIELD_BMP280_DEMO
                        default n
                    config BSP_USING_RTDUINO_SENSORFUSION_SHIELD_SHT31_DEMO
                        bool "Enable RTDUINO SENSORFUSION SHIELD SHT31 DEMO"
                        select PKG_RTDUINO_SENSORFUSION_SHIELD_SHT31_DEMO
                        default n
                    config BSP_USING_RTDUINO_SENSORFUSION_SHIELD_QMC5883L_DEMO
                        bool "Enable RTDUINO SENSORFUSION SHIELD QMC5883L DEMO"
                        select PKG_RTDUINO_SENSORFUSION_SHIELD_QMC5883L_DEMO
                        default n
                    config BSP_USING_RTDUINO_SENSORFUSION_SHIELD_SC7A20_DEMO
                        bool "Enable RTDUINO SENSORFUSION SHIELD SC7A20 DEMO"
                        select PKG_RTDUINO_SENSORFUSION_SHIELD_SC7A20_DEMO
                        default n
                    config BSP_USING_RTDUINO_SENSORFUSION_SHIELD_SSD1306_DEMO
                        bool "Enable RTDUINO SENSORFUSION SHIELD SSD1306 DEMO"
                        select PKG_RTDUINO_SENSORFUSION_SHIELD_SSD1306_DEMO
                        default n
                endif
        endif

    menuconfig BSP_USING_RW007
        bool "Enable RW007"
        default n
        select PKG_USING_RW007
        select BSP_USING_SPI
        select BSP_USING_SPI0
        select RW007_NOT_USE_EXAMPLE_DRIVERS

    if BSP_USING_RW007
        comment "Notice: P5_7 --> 47; P5_6 -->46; P0_5 --> 5; P0_4 --> 4"
        config IFX_RW007_SPI_BUS_NAME
            string "RW007 BUS NAME"
            default "spi0"

        config IFX_RW007_WIFI_SSID
            string "Wi-Fi SSID"
            default "realthread_VIP"

        config IFX_RW007_WIFI_PASSWORD
            string "Wi-Fi Password"
            default "your wifi password"

        config IFX_RW007_CS_PIN
            int "(INT)CS pin index"
            range 1 113
            default 3

        config IFX_RW007_BOOT0_PIN
            int "(INT)BOOT0 pin index (same as spi clk pin)"
            range 1 113
            default 2

        config IFX_RW007_BOOT1_PIN
            int "(INT)BOOT1 pin index (same as spi cs pin)"
            range 1 113
            default 3

        config IFX_RW007_INT_BUSY_PIN
            int "(INT)INT/BUSY pin index"
            range 1 190
            default 160

        config IFX_RW007_RST_PIN
            int "(INT)RESET pin index"
            range 1 190
            default 180
    endif
endmenu

menu "On-chip Peripheral Drivers"

    config BSP_USING_GPIO
        bool "Enable GPIO"
        select RT_USING_PIN
        default y

    menuconfig BSP_USING_UART
        bool "Enable UART"
        default y
        select RT_USING_SERIAL
        if BSP_USING_UART
            config BSP_USING_UART2
                bool "Enable UART2"
                default n
            config BSP_USING_UART4
                bool "Enable UART4"
                default y
            config UART_CPU_IRQ_Number
                int "UART connect CPU Interrupt Number (0-7)"
                range 0 7
                default 3
        endif
    menuconfig BSP_USING_I2C
        bool "Enable HW I2C"
        default n
        select RT_USING_I2C
        if BSP_USING_I2C
            menuconfig BSP_USING_HW_I2C1
                bool "Enable BSP_USING_HW_I2C1"
                default y
                if BSP_USING_HW_I2C1
                    config BSP_I2C1_SCL_PIN
                        int "BSP_I2C1_SCL_PIN number(18,2)"
                        range 0 999
                        default 146
                    config BSP_I2C1_SDA_PIN
                        int "BSP_I2C1_SDA_PIN number(18,1)"
                        range 0 999
                        default 145
                endif
            menuconfig BSP_USING_HW_I2C2
                bool "Enable BSP_USING_HW_I2C2"
                default y
                if BSP_USING_HW_I2C2
                    config BSP_I2C2_SCL_PIN
                        int "BSP_I2C2_SCL_PIN number(0,1)"
                        range 0 999
                        default 1
                    config BSP_I2C2_SDA_PIN
                        int "BSP_I2C2_SDA_PIN number(0,0)"
                        range 0 999
                        default 0
                endif
        endif
    menuconfig BSP_USING_SPI
        bool "Enable SPI"
        default n
        select RT_USING_SPI
        if BSP_USING_SPI
            config BSP_USING_SPI5
                bool "Enable BSP_USING_SPI5"
                default y
            config BSP_USING_SPI0
                bool "Enable BSP_USING_SPI0"
                default y
        endif
endmenu

endmenu