menu "Utilities" config RT_USING_RYM bool "Enable Ymodem" default n help Ymodem is a file transfer component based on the Ymodem protocol. It is primarily used for file transfer between embedded devices and host computers. Features: Includes CRC checksum and retransmission mechanism. File reception and file sending capabilities. Supports multiple file transfers and batch transfers. Typical application scenarios: Firmware upgrades Configuration file transfer Log export Once enabled, Ymodem components can be used for transmission (UART serial port needs to be configured as hardware communication medium). if RT_USING_RYM config YMODEM_USING_CRC_TABLE bool "Enable CRC Table in Ymodem" default n help YMODEM_USING_CRC_TABLE enables the CRC lookup table method in Ymodem. Once enabled, the lookup table method will be used as the default method for CRC checksum calculation (it is disabled by default, the direct calculation method is used for CRC checksum calculation). config YMODEM_USING_FILE_TRANSFER bool "Enable file transfer feature" depends on RT_USING_DFS default y help YMODEM_USING_FILE_TRANSFER controls whether file transfer is enabled. It is enabled by default. Once enabled, received/sent data can be saved to a file, or a file can be read for transfer. Before enabling, RT-Thread's Device Virtual File System (DFS) (RT_USING_DFS) must be enabled and adapted to the specific storage medium (such as SPI Flash driver, SD card driver). endif menuconfig RT_USING_ULOG bool "Enable ulog" default n help ULOG is a lightweight, highly configurable, multi-output logging framework. Core positioning and advantages: Supports log hierarchies, filtering, formatting, and multiple outputs; Adaptable to embedded scenarios, suitable for development and debugging. Once enabled, the ULOG component in RT-Thread can be used (it is disabled by default). if RT_USING_ULOG if !ULOG_USING_SYSLOG choice ULOG_OUTPUT_LOG_LEVEL prompt "The static output log level." default ULOG_OUTPUT_LVL_D help When the log level is less than this option and it will stop output. These log will not compile into ROM when using LOG_X api. NOTE: It's not available on syslog mode. config ULOG_OUTPUT_LVL_A bool "Assert" help The highest level, used to catch the most serious logical errors. Level: 0 config ULOG_OUTPUT_LVL_E bool "Error" help Used to report serious runtime errors Level: 3 config ULOG_OUTPUT_LVL_W bool "Warning" help Used to report unexpected exceptions that may not cause the program to crash. Level: 4 config ULOG_OUTPUT_LVL_I bool "Information" help Used to record key information during program execution. Level: 6 config ULOG_OUTPUT_LVL_D bool "Debug" help Used to output detailed debugging information during the development and debugging phases. Level: 7 endchoice endif if ULOG_USING_SYSLOG choice ULOG_OUTPUT_LOG_LEVEL prompt "The static output log level." default ULOG_OUTPUT_LVL_DEBUG help When the log level is less than this option and it will stop output. These log will not compile into ROM when using LOG_X api. NOTE: It's not available on syslog mode. config ULOG_OUTPUT_LVL_EMERG bool "EMERG" help The system is in an emergency and is about to crash or is already unavailable. Level: 0 config ULOG_OUTPUT_LVL_ALERT bool "ALERT" help An error that must be fixed immediately was discovered. Level: 1 config ULOG_OUTPUT_LVL_CRIT bool "CRIT" help A serious error exists, causing some core functions of the system to malfunction. Level: 2 config ULOG_OUTPUT_LVL_ERROR bool "ERR" help An error occurred Level: 3 config ULOG_OUTPUT_LVL_WARNING bool "WARNING" help There are potential risks or abnormal situations. Level: 4 config ULOG_OUTPUT_LVL_NOTICE bool "NOTICE" help This is a noteworthy normal event; it's not an error, but it could indicate an important state change or information that requires administrator awareness. Level: 5 config ULOG_OUTPUT_LVL_INFO bool "INFO" help Used to record general and detailed system operation information. Level: 6 config ULOG_OUTPUT_LVL_DEBUG bool "DEBUG" help Includes detailed debugging information for development and problem diagnosis. Level: 7 endchoice endif config ULOG_OUTPUT_LVL int default 0 if ULOG_OUTPUT_LVL_A default 0 if ULOG_OUTPUT_LVL_EMERG default 1 if ULOG_OUTPUT_LVL_ALERT default 2 if ULOG_OUTPUT_LVL_CRIT default 3 if ULOG_OUTPUT_LVL_E default 3 if ULOG_OUTPUT_LVL_ERROR default 4 if ULOG_OUTPUT_LVL_W default 4 if ULOG_OUTPUT_LVL_WARNING default 5 if ULOG_OUTPUT_LVL_NOTICE default 6 if ULOG_OUTPUT_LVL_I default 6 if ULOG_OUTPUT_LVL_INFO default 7 if ULOG_OUTPUT_LVL_D default 7 if ULOG_OUTPUT_LVL_DEBUG default 7 config ULOG_USING_ISR_LOG bool "Enable ISR log." default n help The log output API can using in ISR (Interrupt Service Routines) also. config ULOG_ASSERT_ENABLE bool "Enable assert check." default y help ULOG_ASSERT_ENABLE controls whether the ASSERT (assertion) function in the ulog logging system is enabled in the firmware. Once enabled, assertion functionality can be used (enabled by default). config ULOG_LINE_BUF_SIZE int "The log's max width." default 128 help The buffer size for every line log. config ULOG_USING_ASYNC_OUTPUT bool "Enable async output mode." default n help When enable asynchronous output mode. The log output is not immediately and the log will stored to buffer. The another thread (Such as idle) will read the buffer and output the log. So it will using more RAM. if ULOG_USING_ASYNC_OUTPUT config ULOG_ASYNC_OUTPUT_BUF_SIZE int "The async output buffer size." default 2048 help This item will be displayed once ULOG_USING_ASYNC_OUTPUT is enabled. ULOG_ASYNC_OUTPUT_BUF_SIZE is used to set the buffer size in asynchronous output mode.(2048 bytes by default) config ULOG_ASYNC_OUTPUT_BY_THREAD bool "Enable async output by thread." default y help This thread will output the asynchronous logs. The logs can output by other user thread when this option is disable. if ULOG_ASYNC_OUTPUT_BY_THREAD config ULOG_ASYNC_OUTPUT_THREAD_STACK int "The async output thread stack size." default 1024 help ULOG_ASYNC_OUTPUT_THREAD_STACK sets the stack size for the asynchronous output thread (1024 bytes by default). ULOG_ASYNC_OUTPUT_BY_THREAD must be enabled first. config ULOG_ASYNC_OUTPUT_THREAD_PRIORITY int "The async output thread stack priority." range 0 RT_THREAD_PRIORITY_MAX default 30 help ULOG_ASYNC_OUTPUT_THREAD_PRIORITY is used to set the priority of the asynchronous output thread (the default value is 30). ULOG_ASYNC_OUTPUT_BY_THREAD must be enabled first. endif endif menu "log format" config ULOG_OUTPUT_FLOAT bool "Enable float number support. It will using more thread stack." default n select RT_KLIBC_USING_VSNPRINTF_STANDARD help The default formater is using rt_vsnprint and it not supported float number. When enable this option then it will enable libc. The formater will change to vsnprint on libc. if !ULOG_USING_SYSLOG config ULOG_USING_COLOR bool "Enable color log." default y help The log will has different color by level. endif config ULOG_OUTPUT_TIME bool "Enable time information." default y help ULOG_OUTPUT_TIME controls whether timestamps are included in log messages (enabled by default). config ULOG_TIME_USING_TIMESTAMP bool "Enable timestamp format for time." default n depends on ULOG_OUTPUT_TIME help ULOG_TIME_USING_TIMESTAMP controls the display format of time. It is disabled by default and is only visible and effective when ULOG_OUTPUT_TIME is y. config ULOG_OUTPUT_LEVEL bool "Enable level information." default y help ULOG_OUTPUT_LEVEL controls whether log messages include a log level (enabled by default). config ULOG_OUTPUT_TAG bool "Enable tag information." default y help ULOG_OUTPUT_TAG controls whether log tags are included in log messages (enabled by default). config ULOG_OUTPUT_THREAD_NAME bool "Enable thread information." default n help ULOG_OUTPUT_THREAD_NAME controls whether the log message includes the name of the thread that outputs the log (disabled by default). endmenu config ULOG_BACKEND_USING_CONSOLE bool "Enable console backend." default y help The low level output using rt_kprintf(). config ULOG_BACKEND_USING_FILE bool "Enable file backend." select RT_USING_DFS default n help The file backend of ulog. config ULOG_USING_FILTER bool "Enable runtime log filter." default n help It will enable the log filter. Such as level filter, log tag filter, log kw filter and tag's level filter. config ULOG_USING_FINSH_CMD bool "Enable ulog finsh/msh commands" depends on ULOG_USING_FILTER && RT_USING_FINSH default y help Enable this option to use ulog commands in finsh/msh, such as ulog_lvl, ulog_tag, ulog_kw and so on. config ULOG_USING_SYSLOG bool "Enable syslog format log and API." select ULOG_OUTPUT_TIME select ULOG_USING_FILTER default n help ULOG_USING_SYSLOG switches ulog's log output format and some APIs to a syslog-compliant mode. Once ULOG_USING_SYSLOG is selected, ULOG_OUTPUT_TIME will be automatically enabled. Once ULOG_USING_SYSLOG is selected, ULOG_USING_FILTER will be automatically enabled, allowing ulog's log filtering functionality to be enabled. endif config RT_USING_UTEST bool "Enable utest (RT-Thread test framework)" default n help Utest (RT_USING_UTEST) is a lightweight unit testing framework built into RT-Thread. It allows developers to write automated test cases for their code to verify the correctness of functionality. Once enabled, the entire UTest framework is activated (it is not enabled by default). if RT_USING_UTEST config UTEST_THR_STACK_SIZE int "The utest thread stack size" default 4096 help UTEST_THR_STACK_SIZE configure the thread stack size used by the UTest framework to execute test cases.(The default size is 4096 bytes.) config UTEST_THR_PRIORITY int "The utest thread priority" default 20 help UTEST_THR_PRIORITY set the priority of the UTest thread(The default priority is 20.) config RT_UTEST_USING_AUTO_RUN bool "Enable auto run test cases" default n help If enable this option, the test cases will be run automatically when board boot up. if FINSH_USING_OPTION_COMPLETION config RT_UTEST_MAX_OPTIONS int "Maximum number of utest cases for auto-completion" default 64 help RT_UTEST_MAX_OPTIONS is only visible when FINSH_USING_OPTION_COMPLETION (FinSH command-line auto-completion feature) is enabled. RT_UTEST_MAX_OPTIONS sets the maximum number of test cases that the UTest framework supports for auto-completion. By default, auto-completion is supported for up to 64 test cases. endif endif config RT_USING_VAR_EXPORT bool "Enable Var Export" default n help RT_USING_VAR_EXPORT enables or disables the global variable export function (not enabled by default). config RT_USING_RESOURCE_ID bool "Enable resource id" default n help RT_USING_RESOURCE_ID enables or disables the system resource ID feature (disabled by default). rsource "libadt/Kconfig" rsource "rt-link/Kconfig" endmenu