blob: e9519b039c48548e7271f1ce569291c8c2800a55 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
/*
*******************************************************************************
* Copyright(C) NEC Electronics Corporation 2010
* All rights reserved by NEC Electronics Corporation.
* This program should be used on your own responsibility.
* NEC Electronics Corporation assumes no responsibility for any losses
* incurred by customers or third parties arising from the use of this file.
*
* This device driver was created by Applilet3 for V850ES/Jx3
* 32-Bit Single-Chip Microcontrollers
* Filename: CG_system.h
* Abstract: This file implements device driver for System module.
* APIlib: Applilet3 for V850ES/Jx3 V2.01 [20 Apr 2010]
* Device: uPD70F3746
* Compiler: IAR Systems ICCV850
* Creation date: 6/26/2010
*******************************************************************************
*/
#ifndef _MDSYSTEM_
#define _MDSYSTEM_
/*
*******************************************************************************
** Register bit define
*******************************************************************************
*/
/*
Processor clock control register (PCC)
*/
#define _03_CG_PCC_INITIALVALUE 0x03U
/* Use of subclock on-chip feedback resistor (FRC) */
#define _00_CG_SUBCLK_FEEDBACK_USE 0x00U /* subclock on-chip feedback resistor connected */
#define _08_CG_SUBCLK_FEEDBACK_UNUSE 0x80U /* subclock on-chip feedback resistor not connected */
/* Main clock osillator control (MCK) */
#define _00_CG_MAINCLK_ENABLE 0x00U /* main clock oscillation enabled */
#define _04_CG_MAINCLK_STOP 0x40U /* main clock oscillation stopped */
/* Use of main clock on-chip feedback resistor (MFRC) */
#define _00_CG_MAINCLK_FEEDBACK_USE 0x00U /* main clock feedback resistor connected */
#define _20_CG_MAINCLK_FEEDBACK_UNUSE 0x20U /* main clock feedback resistor not connected */
/* Status of CPU clock fCPU (CLS) */
#define _00_CG_CPUCLK_MAINCLK 0x00U /* main clock operation */
#define _10_CG_CPUCLK_SUBCLK 0x10U /* subclock operation */
/* Clock(fCLK/fCPU) selection (CK3 - CK0) */
#define _0F_CG_CPUCLK 0x0FU
#define _00_CG_CPUCLK_MAIN0 0x00U /* fCPU = fXX */
#define _01_CG_CPUCLK_MAIN1 0x01U /* fCPU = fXX/2 */
#define _02_CG_CPUCLK_MAIN2 0x02U /* fCPU = fXX/2^2 */
#define _03_CG_CPUCLK_MAIN3 0x03U /* fCPU = fXX/2^3 */
#define _04_CG_CPUCLK_MAIN4 0x04U /* fCPU = fXX/2^4 */
#define _05_CG_CPUCLK_MAIN5 0x05U /* fCPU = fXX/2^5 */
#define _0B_CG_CPUCLK_SUB 0x0BU /* fXT */
/*
Internal oscillator mode register (RCM)
*/
/* Oscillation/stop of internal oscillator (RSTOP) */
#define _00_CG_INTER_OSC_ON 0x00U /* internal oscillator oscillation */
#define _01_CG_INTER_OSC_OFF 0x01U /* internal oscillator stopped */
/*
CPU operation clock status register (CCLS)
*/
/* CPU operation clock status (CCLSF) */
#define _00_CG_CPUCLK_STATUS_MAINORSUB 0x00U /* operating on main clock(fX) or subclock(fXT) */
#define _01_CG_CPUCLK_STATUS_INTEROSC 0x01U /* operating on internal oscillation clock(fR) */
/*
Lock register (LOCKR)
*/
/* PLL lock status check (LOCK) */
#define _00_CG_PLLSTATUS_LOCK 0x00U /* locked status */
#define _01_CG_PLLSTATUS_UNLOCK 0x01U /* unlocked status */
/*
PLL control register (PLLCTL)
*/
#define _01_CG_PLLCTL_INITIALVALUE 0x01U
/* CPU operation clock selection register (SELPLL) */
#define _00_CG_CPUCLK_CLKTHROUGH 0x00U /* clock-through mode */
#define _02_CG_CPUCLK_PLL 0x02U /* PLL mode */
/* PLL operation stop register (PLLON) */
#define _00_CG_CPUCLK_PLLOFF 0x00U /* PLL stopped */
#define _01_CG_CPUCLK_PLLON 0x01U /* PLL operating */
/*
Clock control register (CKC)
*/
#define _0A_CG_CKC_INITIALVALUE 0x0AU
/* Internal system clock(fXX) in PLL mode */
#define _00_CG_CPUCLK_4PLL 0x00U /* fXX = 4* fX (fX = 2.5 to 5.0 MHz) */
#define _01_CG_CPUCLK_8PLL 0x01U /* fXX = 8* fX (fX = 2.5 to 4.0 MHz) */
/*
PLL lockup time specification register (PLLS)
*/
#define _03_CG_PLLS_INITIALVALUE 0x03U
/* PLL lockup time selection (PLLS2 - PLLS0) */
#define _00_CG_PLLLOCKUP_SEL0 0x00U /* 2^10/fX */
#define _01_CG_PLLLOCKUP_SEL1 0x01U /* 2^11/fX*/
#define _02_CG_PLLLOCKUP_SEL2 0x02U /* 2^12/fX */
#define _03_CG_PLLLOCKUP_SEL3 0x03U /* 2^13/fX (default value) */
/*
Power save control register (PSC)
*/
/* Stand-by mode release control by occurrence of INTWDT2 signal (NMI1M) */
#define _00_CG_STANDBY_INTWDT2EN 0x00U /* enable releasing stand-by mode by INTWDT2 signal */
#define _40_CG_STANDBY_INTWDT2DIS 0x40U /* disable releasing stand-by mode by INTWDT2 signal */
/* Stand-by mode release control by NMI pin input (NMI0M) */
#define _00_CG_STANDBY_NMIEN 0x00U /* enable releasing stand-by mode by NMI pin input */
#define _20_CG_STANDBY_NMIDIS 0x20U /* disable releasing stand-by mode by NMI pin input */
/* Stand-by mode release control by maskable interrupt request signal (NMI0M) */
#define _00_CG_STANDBY_MASKIEN 0x00U /* enable releasing stand-by mode by maskable interrupt request signal */
#define _10_CG_STANDBY_MASKIDIS 0x10U /* disable releasing stand-by mode by maskable interrupt request signal */
/* Setting of stand-by mode (STP) */
#define _00_CG_STANDBY_UNUSE 0x00U /* normal mode */
#define _02_CG_STANDBY_USE 0x02U /* stand-by mode */
/*
Power save mode control register (PSMR)
*/
/* Specification of operation in software stand-by mode (PSM1,PSM0) */
#define _00_CG_POWERSAVE_IDLE1 0x00U /* IDLE1, sub-IDLE modes */
#define _01_CG_POWERSAVE_STOP1 0x01U /* STOP, sub-IDLE modes */
#define _02_CG_POWERSAVE_IDLE2 0x02U /* IDLE2, sub-IDLE modes */
#define _03_CG_POWERSAVE_STOP2 0x03U /* STOP mode */
/*
Clock monitor mode register (CLM)
*/
/* Clock monitor operation enable or disable (CLME) */
#define _01_CG_MONITOR_ENABLE 0x01U /* enable clock monitor operation */
#define _00_CG_MONITOR_DISABLE 0x00U /* disable clock monitor operation */
/*
Watchdog Timer 2 mode register (WDTM2)
*/
/* Selection of operation mode (WDM21, WDM20) */
#define _00_WDT2_OPERMODE_STOP 0x00U /* stops operation */
#define _20_WDT2_OPERMODE_NONMASK 0x20U /* non-maskable interrupt request mode (generation of INTWDT2) */
#define _40_WDT2_OPERMODE_RESET 0x40U /* reset mode (generation of RESWDT2) */
/* Selection of clock mode (WDCS24,WDCS23) */
#define _00_WDT2_CLKMODE_INTEROSC 0x00U /* use internal oscillator */
#define _08_WDT2_CLKMODE_MAINCLK 0x08U /* use Main clock */
#define _10_WDT2_CLKMODE_SUBCLK 0x10U /* use subclock */
/* Watchdog Timer 2 clock Selection (WDCS22 - WDCS20) */
#define _00_WDT2_CLOCK_SEL0 0x00U /* 2^12/fR or 2^18/fXX or 2^9/fXT */
#define _01_WDT2_CLOCK_SEL1 0x01U /* 2^13/fR or 2^19/fXX or 2^10/fXT */
#define _02_WDT2_CLOCK_SEL2 0x02U /* 2^14/fR or 2^20/fXX or 2^11/fXT */
#define _03_WDT2_CLOCK_SEL3 0x03U /* 2^15/fR or 2^21/fXX or 2^12/fXT */
#define _04_WDT2_CLOCK_SEL4 0x04U /* 2^16/fR or 2^22/fXX or 2^13/fXT */
#define _05_WDT2_CLOCK_SEL5 0x05U /* 2^17/fR or 2^23/fXX or 2^14/fXT */
#define _06_WDT2_CLOCK_SEL6 0x06U /* 2^18/fR or 2^24/fXX or 2^15/fXT */
#define _07_WDT2_CLOCK_SEL7 0x07U /* 2^19/fR or 2^25/fXX or 2^16/fXT */
/*
*******************************************************************************
** Macro define
*******************************************************************************
*/
#define _00_CG_VSWC_VALUE 0x00U
/*
*******************************************************************************
** Function define
*******************************************************************************
*/
void CLOCK_Init(void);
void WDT2_Restart(void);
void CG_ReadResetSource(void);
/* Start user code for function. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */
#endif
|
