1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
|
/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2013-05-18 Bernard The first version for LPC40xx
*/
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
#include "board.h"
#include "drv_uart.h"
struct lpc_uart
{
LPC_USARTn_Type *USART;
IRQn_Type USART_IRQn;
};
static rt_err_t lpc_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
// struct lpc_uart *uart;
RT_ASSERT(serial != RT_NULL);
// uart = (struct lpc_uart *)serial->parent.user_data;
// Initialize FIFO for UART0 peripheral
// UART_FIFOConfig(uart->USART, &UARTFIFOConfigStruct);
// UART_TxCmd(uart->USART, ENABLE);
return RT_EOK;
}
static rt_err_t lpc_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct lpc_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct lpc_uart *)serial->parent.user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* disable rx irq */
uart->USART->IER &= ~UART_IER_RBRINT_EN;
break;
case RT_DEVICE_CTRL_SET_INT:
/* enable rx irq */
uart->USART->IER |= UART_IER_RBRINT_EN;
break;
}
return RT_EOK;
}
static int lpc_putc(struct rt_serial_device *serial, char c)
{
struct lpc_uart *uart;
uart = (struct lpc_uart *)serial->parent.user_data;
while (!(uart->USART->LSR & 0x20));
uart->USART->THR = c;
return 1;
}
static int lpc_getc(struct rt_serial_device *serial)
{
struct lpc_uart *uart;
uart = (struct lpc_uart *)serial->parent.user_data;
if (uart->USART->LSR & 0x01)
{
return (uart->USART->RBR);
}
return -1;
}
static const struct rt_uart_ops lpc_uart_ops =
{
lpc_configure,
lpc_control,
lpc_putc,
lpc_getc,
};
#if defined(RT_USING_UART0)
/* UART0 device driver structure */
struct lpc_uart uart0 =
{
LPC_USART0,
USART0_IRQn,
};
struct rt_serial_device serial0;
void UART0_IRQHandler(void)
{
struct lpc_uart *uart;
volatile uint32_t intsrc, temp;
uart = &uart0;
/* enter interrupt */
rt_interrupt_enter();
/* Determine the interrupt source */
intsrc = uart->USART->IIR & UART_IIR_INTID_MASK;
switch (intsrc)
{
case UART_IIR_INTID_RLS: /* Receive Line Status interrupt*/
/* read the line status */
intsrc = uart->USART->LSR;
/* Receive an error data */
if (intsrc & UART_LSR_PE)
{
temp = LPC_USART0->RBR;
}
break;
case UART_IIR_INTID_RDA: /* Receive data */
case UART_IIR_INTID_CTI: /* Receive data timeout */
/* read the data to buffer */
while (uart->USART->LSR & UART_LSR_RDR)
{
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
break;
default:
break;
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(RT_USING_UART2)
/* UART2 device driver structure */
struct lpc_uart uart2 =
{
LPC_USART2,
USART2_IRQn,
};
struct rt_serial_device serial2;
void UART2_IRQHandler(void)
{
struct lpc_uart *uart;
uint32_t intsrc, temp;
uart = &uart2;
/* enter interrupt */
rt_interrupt_enter();
/* Determine the interrupt source */
intsrc = uart->USART->IIR & UART_IIR_INTID_MASK;
switch (intsrc)
{
case UART_IIR_INTID_RLS: /* Receive Line Status interrupt*/
/* read the line status */
intsrc = uart->USART->LSR;
/* Receive an error data */
if (intsrc & UART_LSR_PE)
{
temp = LPC_USART0->RBR;
}
break;
case UART_IIR_INTID_RDA: /* Receive data */
case UART_IIR_INTID_CTI: /* Receive data timeout */
/* read the data to buffer */
while (uart->USART->LSR & UART_LSR_RDR)
{
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
break;
default:
break;
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif
void rt_hw_uart_init(void)
{
struct lpc_uart *uart;
struct serial_configure config;
#ifdef RT_USING_UART0
uart = &uart0;
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial0.ops = &lpc_uart_ops;
serial0.config = config;
/* Enable GPIO register interface clock */
LPC_CCU1->CLK_M4_GPIO_CFG |= 0x01;
while (!(LPC_CCU1->CLK_M4_GPIO_STAT & 0x01));
/* Enable USART1 peripheral clock */
LPC_CCU2->CLK_APB0_USART0_CFG |= 0x01;
while (!(LPC_CCU2->CLK_APB0_USART0_STAT & 0x01));
/* Enable USART1 register interface clock */
LPC_CCU1->CLK_M4_USART0_CFG |= 0x01;
while (!(LPC_CCU1->CLK_M4_USART0_STAT & 0x01));
/* Init GPIO pins */
LPC_SCU->SFSP6_4 = (1 << 6) | /* Input buffer enabled */
(1 << 4) | /* Pull-up disabled */
(2 << 0) ; /* Pin P6_4 used as U0_TXD */
LPC_SCU->SFSP6_5 = (1 << 6) | /* Input buffer enabled */
(1 << 4) | /* Pull-up disabled */
(2 << 0) ; /* Pin P6_5 used as U0_RXD */
/* Init USART0 */
LPC_USART0->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */
LPC_USART0->DLL = 0x06; /* 115200 Baudrate @ 12 MHz IRC */
LPC_USART0->DLM = 0x00;
LPC_USART0->FDR = 0xC1;
LPC_USART0->LCR = 0x03; /* DLAB = 0 */
/* preemption = 1, sub-priority = 1 */
NVIC_SetPriority(uart->USART_IRQn, ((0x01 << 3) | 0x01));
/* Enable Interrupt for UART channel */
NVIC_EnableIRQ(uart->USART_IRQn);
/* register UART1 device */
rt_hw_serial_register(&serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif
#ifdef RT_USING_UART2
uart = &uart2;
config.baud_rate = BAUD_RATE_115200;
config.bit_order = BIT_ORDER_LSB;
config.data_bits = DATA_BITS_8;
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial2.ops = &lpc_uart_ops;
serial2.config = config;
/* Enable GPIO register interface clock */
LPC_CCU1->CLK_M4_GPIO_CFG |= 0x01;
while (!(LPC_CCU1->CLK_M4_GPIO_STAT & 0x01));
/* Enable USART1 peripheral clock */
LPC_CCU2->CLK_APB0_USART0_CFG |= 0x01;
while (!(LPC_CCU2->CLK_APB2_USART2_STAT & 0x01));
/* Enable USART2 register interface clock */
LPC_CCU1->CLK_M4_USART0_CFG |= 0x01;
while (!(LPC_CCU1->CLK_M4_USART2_STAT & 0x01));
/* Init GPIO pins */
LPC_SCU->SFSP1_15 = (1 << 6) | /* Input buffer enabled */
(1 << 4) | /* Pull-up disabled */
(1 << 0) ; /* Pin P1_15 used as U2_TXD */
LPC_SCU->SFSP1_16 = (1 << 6) | /* Input buffer enabled */
(1 << 4) | /* Pull-up disabled */
(1 << 0) ; /* Pin P1_16 used as U2_RXD */
/* Init USART2 */
LPC_USART2->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */
LPC_USART2->DLL = 0x06; /* 115200 Baudrate @ 12 MHz IRC */
LPC_USART2->DLM = 0x00;
LPC_USART2->FDR = 0xC1;
LPC_USART2->LCR = 0x03; /* DLAB = 0 */
/* preemption = 1, sub-priority = 1 */
NVIC_SetPriority(uart->USART_IRQn, ((0x01 << 3) | 0x01));
/* Enable Interrupt for UART channel */
NVIC_EnableIRQ(uart->USART_IRQn);
/* register UART1 device */
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif
}
|
