blob: eecbf2e4b906d41e8ee82239854ed9b55aeb1271 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
menuconfig RT_USING_WDT
bool "Using Watch Dog device drivers"
default n
help
Enable the common watchdog device layer so watchdog-capable SoCs or
external supervisors can be exposed through the RT-Thread `rt_watchdog`
APIs. Selecting this option allows watchdog platform drivers to register
/dev/wdt style devices, lets applications query/set timeout windows, and
integrates watchdog notifications into the driver-model (DM) probe/remove
flow. Disable it only when the hardware has no watchdog or it is managed
entirely outside of RT-Thread, because the system will no longer be able
to arm, feed or inspect watchdogs during boot and runtime.
config RT_WDT_DW
bool "Synopsys DesignWare watchdog"
depends on RT_USING_DM
depends on RT_USING_WDT
depends on RT_USING_RESET
default n
help
Build the driver for Synopsys DesignWare watchdog blocks that appear in
many ARM and RISC-V SoCs. The driver maps the DM platform resources,
exports the 16 preset timeout levels ("TOPs"), supports optional pre-
timeout interrupts, and automatically toggles the associated reset line
through `RT_USING_RESET`. Once started the DW watchdog cannot be disabled,
so the driver only gates the peripheral clock and pulses the reset
controller to keep it under control. Use this when your device tree
exposes a `snps,dw-wdt` node and you need either reset-based system
recovery or two-stage IRQ/Reset supervision; otherwise leave it off.
config RT_WDT_I6300ESB
bool "Intel 6300ESB Timer/Watchdog"
depends on RT_USING_DM
depends on RT_USING_WDT
depends on RT_USING_PCI
help
Enable support for the watchdog integrated in Intel 6300ESB southbridge
chipsets. The driver binds to the PCI device, unlocks the dual-stage timer,
and exposes the 1 kHz heartbeat window (1–2046 seconds) through the
standard watchdog IOCTLs. It can optionally enter "nowayout" mode when the
firmware locks the control register, so be careful when testing on shared
x86 hardware. Select this only on boards that actually contain the 6300ESB
watchdog because the driver directly touches PCI config space and assumes
the LPC reset registers are routed correctly.
if RT_USING_DM && RT_USING_WDT
osource "$(SOC_DM_WDT_DIR)/Kconfig"
endif
|
