threadx.git/ports/cortex_m33, branch dev

Updated Cortex-M BASEPRI zero immediates (#564)

2026-06-29T20:07:12Z

Use explicit immediate syntax when clearing BASEPRI in GNU and AC6 Cortex-M scheduler assembly. Co-authored-by: Codex

Add SysTick counter reset in Cortex-M ports (#561)

2026-06-24T16:16:51Z

* Add SysTick counter reset in Cortex-M ports The SysTick counter value (SYST_CVR @0xE000E018) is indeterminate after reset. Without clearing it prior to enabling the counter, the first tick interval becomes unpredictable. * Fixed missing comment and added generated-by header in Cortex-M0/AC6 port Added the missing inline comment on the LDR r1, =0 instruction (Build value for SysTick reset) and the required AI-generated attribution comment under the copyright header. --------- Co-authored-by: Frédéric Desbiens Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Release 6.5.1.202602a preparation (#547)

2026-06-08T14:59:04Z

* Updated version number constants * Updated port version strings --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Fix/issue 545 basepri endif (#546)

2026-06-08T14:51:08Z

* Fixed #else replaced with #endif in tx_port.h for cortex_m3/m4/m7 gnu/ac6/iar ports In the __set_basepri_value/#ifdef TX_PORT_USE_BASEPRI block, an #else directive was incorrectly replaced with #endif in a prior commit. This caused the TX_PORT_USE_BASEPRI guard to close prematurely and left __enable_interrupts unconditionally visible (or triggered an orphaned #endif / missing #endif error at compile time). Affected ports: cortex_m3/ac6, cortex_m3/iar, cortex_m4/ac6, cortex_m4/gnu, cortex_m4/iar, cortex_m7/ac6, cortex_m7/gnu, cortex_m7/iar. For cortex_m3/gnu and cortex_m4/gnu the fix restores the #else and the existing second #endif now correctly closes the block. For the ac6/iar variants of m3/m4 and all m7 variants, the #else is restored and a missing closing #endif is added after __enable_interrupts. Also adds Linux shell build scripts (build_threadx.sh and build_threadx_sample.sh) for the cortex_m3/gnu, cortex_m4/gnu, and cortex_m7/gnu example_build directories as Linux equivalents of the existing .bat files. * Fixed missing linker script symbols in cortex_m4/gnu example_build cortexm4_crt0.S references several symbols that were absent from sample_threadx.ld, causing undefined-reference linker errors when building the sample: - __text_load_start__, __text_start__, __text_end__ - __rodata_load_start__, __rodata_start__, __rodata_end__ - __fast_load_start__, __fast_start__, __fast_end__ - __ctors_load_start__, __dtors_load_start__ Changes: - Added __text_start__/__text_end__ bounds to the .text section and __text_load_start__ via LOADADDR(.text). - Moved .rodata out of .text into its own section with start/end/load - Added __ctors_load_start__ and __dtors_load_start__ markers within .text (load address == VMA since the section is XIP in FLASH; the crt0 copy call becomes a no-op). - Added an empty .fast section in RAM with __fast_load_start__ pointing to __fast_start__ so the crt0 fast-copy call is a no-op. * Added Linux build scripts and fixed path bug in cortex_m23 for all ports changed between v6.5.0 and v6.5.1 Added build_threadx.sh (and build_threadx_sample.sh where applicable) as Linux equivalents of the Windows .bat scripts for all GNU-toolchain ports touched between v6.5.0.202601_rel and v6.5.1.202602_rel: arm9, arm11, cortex_a5/a7/a8/a9/a12/a15/a17, cortex_m0, cortex_m23, cortex_r4, cortex_r5 For cortex_m33/m55/m85 (which had no .bat equivalent), build_threadx.sh was written from scratch using the port CMakeLists.txt source lists and the correct CPU flags (-mcpu=cortex-m33/m55/m85 -mthumb). Also fixed a pre-existing bug in cortex_m23/gnu/example_build/ build_threadx.bat (and the generated .sh): tx_thread_stack_error_handler.c and tx_thread_stack_error_notify.c were referenced as ../src/ (port directory) instead of ../../../../common/src/ where they actually live. All 16 newly added build_threadx.sh scripts were verified to compile successfully with arm-none-eabi-gcc 13.2.1. --------- Closes #545 Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Added copyright headers to files missing them

2026-06-06T19:48:06Z

Applied the standard MIT license header to all project-owned C, header, assembly, shell, and Python files that were missing a copyright notice. Third-party, toolchain startup, and auto-generated files were excluded. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Release 6.5.1.202602 preparation (#543)

2026-06-03T20:55:01Z

* Updated version number constants * Updated port version strings --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Refactored, consolidated, and cleaned up RV32/RV64 ports (#536)

2026-05-27T14:30:57Z

risc-v: refactor, consolidate, and fix RV32/RV64 ports Consolidates the RISC-V 32-bit and 64-bit GNU/Clang port sources, fixes two pre-existing assembly bugs discovered during testing, and hardens the build infrastructure for both the regression suite and the CORE-V MCU example. --- Port consolidation (RV32 GNU + Clang) --- - Delete ports/risc-v32/clang/src/ (8 .S files had no Clang-specific directives; diverged from GNU only due to missing bug fixes). The Clang port CMakeLists.txt now compiles from ../gnu/src/. - Change .global -> .weak for _tx_initialize_low_level in gnu/src/ to allow BSP-level override without a linker conflict (adopted from Clang port). - Create ports/risc-v32/common/tx_port_riscv32_common.h with all definitions shared between GNU and Clang ports. Reduce both tx_port.h files to thin wrappers. - Add a prominent comment in risc-v64/gnu/inc/tx_port.h explaining why LONG/ULONG are intentionally 32-bit on RV64 (ThreadX ABI requirement, mirrors win64/MSVC LLP64). --- Shared CMake helper --- - Add cmake/threadx_riscv_port.cmake with threadx_add_riscv_port(). All three port CMakeLists.txt files are reduced to ~8 lines each. Include path is relative to CMAKE_CURRENT_LIST_DIR so the helper works whether ports are built standalone or as a subdirectory of the test framework. --- Shared example-build drivers --- - Create canonical driver files under ports/risc-v_common/: inc/csr.h (uintptr_t-based; portable RV32 + RV64) example_build/plic/ (plic.c, plic.h) example_build/uart/ (uart_qemu_ns16550.c/h; static inline putc_nolock) example_build/trap/ (trap_qemu.c; XLEN-portable mcause constants) - Replace per-example copies with symlinks in all qemu_virt and cva6_ariane example directories. - Fix OS_IS_INTERRUPT typo (was OS_IS_INTERUPT) in shared trap_qemu.c. - Gate print_hex() behind TX_RISCV_TRAP_DEBUG. --- Bug fixes in RV32 assembly --- tx_thread_schedule.S: - Solicited-return FP path: reload t0 from the mepc stack slot before csrw mepc, t0. After the FP restore block, t0 held the fcsr value (0 for new threads), which caused mepc = 0 and an immediate instruction-address fault on the first context switch. - Same path: reload t0 from the mstatus stack slot before csrw mstatus, t0 to avoid writing the stale fcsr value into mstatus. tx_thread_system_return.S: - FP callee-saved registers were saved unconditionally before the mstatus.FS check, causing an illegal instruction trap (mcause=0x2) when a thread with FS=Off (lazy FPU, thread has never used FP) voluntarily yielded. - Apply the same FS guard pattern used in tx_thread_context_save.S: read mstatus first, isolate FS[1:0], and skip fsw/fsd if FS == Off. Both bugs were pre-existing on origin/dev and are unrelated to the consolidation changes. --- RV64 64-bit pointer compatibility --- - Add TX_TIMER_INTERNAL_EXTENSION, TX_THREAD_CREATE_TIMEOUT_SETUP, and TX_THREAD_TIMEOUT_POINTER_SETUP to risc-v64/gnu/inc/tx_port.h to store the thread timeout pointer in a VOID * extension field rather than truncating it into a 32-bit ULONG. Mirrors the win64 port pattern. - Define TX_TIMER_EXTENSION_PTR_DEFINED as a portable sentinel. - Update threadx_thread_basic_execution_test.c guard from #if defined(_WIN64) to #if defined(_WIN64) || defined(TX_TIMER_EXTENSION_PTR_DEFINED). - Disable -Wconversion for the RV64 test build: ULONG = unsigned int (32-bit) is intentional for ThreadX ABI but triggers spurious warnings when sizeof() (8 bytes on RV64) appears in arithmetic with ULONG in common/src/. --- Regression suite cmake fixes --- test/tx/cmake/riscv/regression/CMakeLists.txt: - Build testcontrol_weak_defaults.c as a separate OBJECT library and include it in every test executable via $. GNU ld does not extract objects from a static archive to satisfy weak symbols, so bundling it in test_utility was insufficient for the standalone threadx_initialize_kernel_setup_test. test/tx/cmake/regression/CMakeLists.txt, test/smp/cmake/regression/CMakeLists.txt: - Same fix applied to the Linux and SMP regression builds. The symbols abort_all_threads_suspended_on_mutex, suspend_lowest_priority, and abort_and_resume_byte_allocating_thread were introduced by the win64 merge and left the standalone test unlinkable. --- CORE-V MCU toolchain and build fixes --- cmake/riscv64-gcc-rv32imc.cmake: - Resolve riscv64-unknown-elf-gcc via PATH so the riscv-collab toolchain in /opt/riscv/bin is preferred when it appears first. ports/risc-v32/gnu/example_build/core_v_mcu/bsp/clz.c (new): - The riscv-collab toolchain is built without rv32 multilib, so its libgcc does not define __clzsi2 (the helper emitted for __builtin_clz() in fll.c). Add a weak __clzsi2 fallback so the build is self-contained with any riscv64-unknown-elf toolchain. The weak attribute yields to a libgcc-provided strong symbol when the Ubuntu multilib package is used. core_v_mcu/CMakeLists.txt: - Add bsp/clz.c to sources. - Reference CMAKE_TOOLCHAIN_FILE via message(STATUS) to suppress the false- positive "Manually-specified variables were not used by the project" CMake warning and to show the active toolchain at configure time. --- Housekeeping --- - Rename azrtos_test_* -> threadx_test_* (eliminate Azure RTOS branding). - Add RV64 QEMU CI test script: ports/risc-v64/gnu/example_build/qemu_virt/test/ threadx_test_tx_gnu_riscv64_qemu.py - Normalize entry.s -> entry.S in all 4 example directories. - .gitignore: exclude build_m7/ and .codex local artifacts. - CI: comment out the riscv regression workflow job and remove it from the deploy job's needs list (preserved in-place for easy re-enablement). --- Verified --- - 95/95 RV32 regression tests pass (QEMU virt) - 95/95 RV64 regression tests pass (QEMU virt) - All 5 Linux build configurations build cleanly (default_build_coverage, disable_notify_callbacks_build, stack_checking_build, stack_checking_rand_fill_build, trace_build) - CORE-V MCU example_build links cleanly with /opt/riscv toolchain Co-authored-by: Copilot 223556219+Copilot@users.noreply.github.com

Fixed race condition and message loss in Cortex-M ports (#523)

2026-04-29T13:10:57Z

* Fixed race condition and message loss in Cortex-M GNU, AC6, and IAR ports (#516) - Added compiler memory barriers to BASEPRI management functions in tx_port.h. - Added architectural barriers (DSB/ISB) to scheduler return paths in tx_port.h and tx_thread_system_return.S to prevent fall-through before context switch. - These changes address spurious thread resumption and lost messages, especially when TX_NOT_INTERRUPTABLE is enabled. - These changes ensure that pending interrupts (specifically PendSV) are recognised before subsequent instructions are executed, following Kairalite's feedback and ARM architectural guidelines. Assisted-by: Gemini (Gemini 2.0 Flash) ----- * Added a comment in common/tx_queue_cleanup to document why the NI path omits revalidation guards - In `TX_NOT_INTERRUPTABLE` mode, the caller keeps interrupts disabled across the entire cleanup call, so the race window that makes the guards necessary in the interruptable path cannot occur. Add a comment explaining this, and noting that all paths that resume a suspended thread clear tx_thread_suspend_cleanup before calling _tx_thread_system_ni_resume, making double-cleanup impossible. This prevents future false-positive suggestions (e.g. from AI tools) to add redundant checks to the NI path. Relates to: eclipse-threadx/threadx#516 Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Updated copyright headers and version number constants (#509)

2026-03-05T09:46:30Z

* Updated version number constants * Removed revision history from all files * Added Eclipse ThreadX contributors' copyright header

initial commit

2025-08-27T22:15:42Z