threadx.git/ports/cortex_m4/ac6/src, branch dev

Normalized the AI disclosure comment to one fixed line per file (#740)

2026-09-15T21:17:26Z

The per-edit disclosure named the product and model, so every agent and every model version appended another line. 74 files carried two to four of them, and the same five products had accumulated 13 spellings -- Copilot against GitHub Copilot, Claude Sonnet 4.6 against claude-sonnet-4.6, four spellings of Codex. Twenty assembly lines carried a doubled comment marker, `; //` or `@ //`. Every file now carries exactly one line, fixed text naming no product: Portions of this file were generated with AI assistance. It is written with the comment character that file already uses, so the `;` and `@` assembly files keep theirs and the doubled markers are gone. Precise attribution stays on the commit, where the Assisted-by trailer is per-change, dated and attached to the diff it describes. A header line cannot hold that record honestly, because the code it names gets rewritten and the line stays. A file-level flag answers whether; the history answers who. Comment-only. 455 files, 455 insertions and 574 deletions: every removed line was a disclosure line, every added line is the fixed text, and no file is left with zero or with more than one. `scripts/check_ports.sh` passes, including the reproducibility check that would catch a ports_arch master and its generated copies drifting apart. Recompiled against dev, every file that builds without a vendor toolchain gives a byte-identical object: 19 of 19 C files under common, 100 of 100 GNU assembly files, and all 16 assemblable files whose comment marker changed. The 10 remaining marker changes are ac5 and IAR sources where `;` already started the comment and only the redundant `//` was removed. Assisted-by: Claude Code (Opus 5)

Allowed a BASEPRI-masked interrupt to wake the Cortex-M idle loop from WFI (#711)

2026-09-09T15:29:14Z

The idle loop in _tx_thread_schedule masks interrupts before re-reading _tx_thread_execute_ptr, so that an interrupt cannot make a thread ready between that read and the WFI and then be lost. With PRIMASK that is safe: the architecture excludes PRIMASK from the WFI wake-up condition, so the interrupt still wakes the processor and is taken as soon as the loop re-enables interrupts. BASEPRI is not excluded. When TX_PORT_USE_BASEPRI is defined, the mask written at the top of the loop is still in place at the WFI, so any interrupt at or below TX_PORT_BASEPRI fails to wake the processor at all. On a system where every interrupt is managed by ThreadX, that is every interrupt, and the processor stays in WFI or in the low power mode entered by tx_low_power_enter until something outside the mask happens. Set PRIMASK and clear BASEPRI for the duration of the WFI, then restore BASEPRI and clear PRIMASK. Interrupts remain masked across the whole window, so the original race is still closed, but the wake-up condition is now evaluated with BASEPRI clear and any enabled interrupt can end the wait. A pending interrupt is taken at the CPSIE i, or at the existing unmask further down the loop if it falls below TX_PORT_BASEPRI. The change is made in the ARMv7-M and ARMv8-M sources under ports_arch, including the module manager, and propagated to the generated ports with the copy scripts. The ghs and keil ports do not implement TX_PORT_USE_BASEPRI, and Cortex-M0/M0+/M23 have no BASEPRI register, so those ports are unaffected. Verified by assembling every patched GNU port for Cortex-M3, M4, M7, M33, M55 and M85, with and without TX_PORT_USE_BASEPRI, TX_LOW_POWER and TX_ENABLE_EXECUTION_CHANGE_NOTIFY, and by checking the disassembly of the idle loop. Fixes #279 Assisted-by: Copilot (Opus 5)

Restored ports_arch as the source of truth for the Cortex-M ports (#590)

2026-08-09T14:42:54Z

The Cortex-M ports under ports/ are generated. scripts/copy_armv7_m.sh copies one tx_port.h and the per tool sources to fifteen M3, M4 and M7 targets, and scripts/copy_armv8_m.sh does the same for nine M33, M55 and M85 targets. The ports_arch_check workflow runs both scripts and fails if the tree is not reproducible, so those copies are meant never to be edited directly. They were. Every Cortex-M fix since #523 was applied to the generated copies and not to the source, so the source fell behind and the check went red: running the three scripts on dev changes 35 files. The check triggers only on pull requests targeting master, which is why nothing caught it while the fixes were merged into dev. Left alone, the next run of these scripts would have reverted three separate pieces of work: the memory barriers and clobbers from #523, the correction of the IAR assembly header to use the assembler's own comment syntax, and the move of tx_initialize_low_level.S into example_build for the M33, M55 and M85 GNU ports from #514. Bring the sources up to what the ports carry today, and regenerate. Two behavioural changes come with that, both deliberate. The barriers from #523 reach the ac5 and keil variants of M3, M4 and M7, which were outside the scope of that fix and never received it. The barrier that follows restoring the interrupt posture, which #523 gave only to the GNU ports because GNU was the only toolchain that could be tested, now applies to every tool; the identical asm statement already shipped in the AC6 and IAR ports, so this adds a pipeline flush rather than any new compiler exposure. Regenerating also drops a stray #endif at the end of the Cortex-M85 IAR tx_port.h, added by #523, which left that header with one more #endif than #if and unable to compile. Every other ARMv8-M port was balanced. Verified that the scripts are idempotent afterwards, that ports_arch_check would pass, that no port loses a barrier or a clobber, that every regenerated header is preprocessor balanced, and that every Cortex-M port covered by the two scripts now carries the entry barrier. Assisted-by: Claude Code (Opus 5)

Updated Cortex-M BASEPRI zero immediates (#564)

2026-06-29T20:07:12Z

Use explicit immediate syntax when clearing BASEPRI in GNU and AC6 Cortex-M scheduler assembly. Co-authored-by: Codex

Fixed race condition and message loss in Cortex-M ports (#523)

2026-04-29T13:10:57Z

* Fixed race condition and message loss in Cortex-M GNU, AC6, and IAR ports (#516) - Added compiler memory barriers to BASEPRI management functions in tx_port.h. - Added architectural barriers (DSB/ISB) to scheduler return paths in tx_port.h and tx_thread_system_return.S to prevent fall-through before context switch. - These changes address spurious thread resumption and lost messages, especially when TX_NOT_INTERRUPTABLE is enabled. - These changes ensure that pending interrupts (specifically PendSV) are recognised before subsequent instructions are executed, following Kairalite's feedback and ARM architectural guidelines. Assisted-by: Gemini (Gemini 2.0 Flash) ----- * Added a comment in common/tx_queue_cleanup to document why the NI path omits revalidation guards - In `TX_NOT_INTERRUPTABLE` mode, the caller keeps interrupts disabled across the entire cleanup call, so the race window that makes the guards necessary in the interruptable path cannot occur. Add a comment explaining this, and noting that all paths that resume a suspended thread clear tx_thread_suspend_cleanup before calling _tx_thread_system_ni_resume, making double-cleanup impossible. This prevents future false-positive suggestions (e.g. from AI tools) to add redundant checks to the NI path. Relates to: eclipse-threadx/threadx#516 Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Updated copyright headers and version number constants (#509)

2026-03-05T09:46:30Z

* Updated version number constants * Removed revision history from all files * Added Eclipse ThreadX contributors' copyright header

Update copyright.

2024-01-29T05:51:15Z

Update on 31 Mar 2023. Expand to see details.

2023-03-31T07:34:47Z

af5702cbf Include tx_user.h only when TX_INCLUDE_USER_DEFINE_FILE is defined for assembly files

Release 6.2.1 on 08 Mar 2023. Expand to see details.

2023-03-08T08:26:22Z

cee19603d Include tx_user.h conditionally. e40e08007 Update owners d69641273 Update release date and version 394aee52f Add tx_user.h to GNU port assembly files 5cca2ddd0 RISC-V 64 bit port for Microchip e0f2c373c Link Winmm.lib that required by the high-resolution timer. 6af472a68 Update Win32 port with high resolution timer. aea7b556a Add DMB ISH barrier inst in ARMv8-A SMP scheduler 19091a262 Add .section .preamble to m3 m4 m7 module ports ced60e1b7 Add missing parenthesis in ports assembly file 309dc77ca Modules Cortex-A7 IAR new port c752a4063 Modules Cortex-A7 GNU new port dc224b90f Fix race condition in tx_thread_wait_abort and update regression test 6e261f5b7 create threadx cmsis-pack

Release 6.1.12

2022-07-26T02:04:40Z