threadx.git/ports_module/cortex_m33/iar, branch master

Updated ThreadX version constants and port strings to 6.5.2.202603 (#781)

2026-09-28T18:36:10Z

ThreadX still declares 6.5.1.202602 with hotfix 'a', which is the previous release rather than the one being cut. prepare_release.sh updated the five version constants in tx_api.h and the version string in 211 port headers across ports, ports_smp, ports_arch and ports_module. The hotfix letter is cleared, since the target has none. Nothing else changed: every line in the port commit carries a version, and no file outside an inc/tx_port.h was touched. The port consistency checks passed before the branch was cut, which is what the script gates on. Host regression 113/113 with zero warnings, and the AI disclosure check passes. Assisted-by: Claude Code (Opus 5)

Normalized the AI disclosure comment to one fixed line per file (#740)

2026-09-15T21:17:26Z

The per-edit disclosure named the product and model, so every agent and every model version appended another line. 74 files carried two to four of them, and the same five products had accumulated 13 spellings -- Copilot against GitHub Copilot, Claude Sonnet 4.6 against claude-sonnet-4.6, four spellings of Codex. Twenty assembly lines carried a doubled comment marker, `; //` or `@ //`. Every file now carries exactly one line, fixed text naming no product: Portions of this file were generated with AI assistance. It is written with the comment character that file already uses, so the `;` and `@` assembly files keep theirs and the doubled markers are gone. Precise attribution stays on the commit, where the Assisted-by trailer is per-change, dated and attached to the diff it describes. A header line cannot hold that record honestly, because the code it names gets rewritten and the line stays. A file-level flag answers whether; the history answers who. Comment-only. 455 files, 455 insertions and 574 deletions: every removed line was a disclosure line, every added line is the fixed text, and no file is left with zero or with more than one. `scripts/check_ports.sh` passes, including the reproducibility check that would catch a ports_arch master and its generated copies drifting apart. Recompiled against dev, every file that builds without a vendor toolchain gives a byte-identical object: 19 of 19 C files under common, 100 of 100 GNU assembly files, and all 16 assemblable files whose comment marker changed. The 10 remaining marker changes are ac5 and IAR sources where `;` already started the comment and only the redundant `//` was removed. Assisted-by: Claude Code (Opus 5)

Removed the vector table offset register and system stack pointer setup from the Cortex-M low-level initialization (#714)

2026-09-09T20:28:59Z

_tx_initialize_low_level wrote VTOR and derived _tx_thread_system_stack_ptr from the reset vector on every Cortex-M port. Programming VTOR is the job of the low-level startup code that runs before the kernel is entered, and doing it again inside ThreadX silently overrode a vector table that the application, a bootloader or a firmware update had already installed. It also forced every application to export a vector table symbol that the kernel itself never needed. _tx_thread_system_stack_ptr is never read by any Cortex-M port, so the value copied out of the reset vector served no purpose. Both blocks are removed from all Cortex-M ports, together with the now-unused symbol declarations. The GreenHills files keep the NVIC base address load that the removed block used to leave in r0 for the SysTick setup that follows. Applications that relied on ThreadX programming VTOR must now set it in their startup code. The bundled examples link their vector table at address zero and run on the reset default. Fixes #370 Assisted-by: Copilot (Opus 5)

Allowed a BASEPRI-masked interrupt to wake the Cortex-M idle loop from WFI (#711)

2026-09-09T15:29:14Z

The idle loop in _tx_thread_schedule masks interrupts before re-reading _tx_thread_execute_ptr, so that an interrupt cannot make a thread ready between that read and the WFI and then be lost. With PRIMASK that is safe: the architecture excludes PRIMASK from the WFI wake-up condition, so the interrupt still wakes the processor and is taken as soon as the loop re-enables interrupts. BASEPRI is not excluded. When TX_PORT_USE_BASEPRI is defined, the mask written at the top of the loop is still in place at the WFI, so any interrupt at or below TX_PORT_BASEPRI fails to wake the processor at all. On a system where every interrupt is managed by ThreadX, that is every interrupt, and the processor stays in WFI or in the low power mode entered by tx_low_power_enter until something outside the mask happens. Set PRIMASK and clear BASEPRI for the duration of the WFI, then restore BASEPRI and clear PRIMASK. Interrupts remain masked across the whole window, so the original race is still closed, but the wake-up condition is now evaluated with BASEPRI clear and any enabled interrupt can end the wait. A pending interrupt is taken at the CPSIE i, or at the existing unmask further down the loop if it falls below TX_PORT_BASEPRI. The change is made in the ARMv7-M and ARMv8-M sources under ports_arch, including the module manager, and propagated to the generated ports with the copy scripts. The ghs and keil ports do not implement TX_PORT_USE_BASEPRI, and Cortex-M0/M0+/M23 have no BASEPRI register, so those ports are unaffected. Verified by assembling every patched GNU port for Cortex-M3, M4, M7, M33, M55 and M85, with and without TX_PORT_USE_BASEPRI, TX_LOW_POWER and TX_ENABLE_EXECUTION_CHANGE_NOTIFY, and by checking the disassembly of the idle loop. Fixes #279 Assisted-by: Copilot (Opus 5)

Fixed the missing immediate prefix on MOV in Cortex-M schedulers (#693)

2026-09-03T15:44:27Z

The BASEPRI-masking path in tx_thread_schedule wrote "MOV r0, 0" rather than "MOV r0, #0". UAL requires the "#" prefix on an immediate operand. GNU as and the LLVM-based assemblers accept the unprefixed form and emit the intended encoding, but stricter assemblers reject it outright, so the affected ports could not be built with those toolchains. The GNU and AC6 sources had already been corrected; this brings the IAR and AC5 sources into line. Verified that both spellings assemble to the same Thumb-2 encoding (f04f 0000), so this is a source-correctness fix with no change in generated code or runtime behaviour. Covers 31 occurrences across the Cortex-M3, M4, M7, M33, M52, M55 and M85 ports, their module manager counterparts, and the shared ARMv7-M and ARMv8-M architecture sources. Fixes #461 Assisted-by: Copilot (Opus 5)

Add SysTick counter reset in Cortex-M ports (#561)

2026-06-24T16:16:51Z

* Add SysTick counter reset in Cortex-M ports The SysTick counter value (SYST_CVR @0xE000E018) is indeterminate after reset. Without clearing it prior to enabling the counter, the first tick interval becomes unpredictable. * Fixed missing comment and added generated-by header in Cortex-M0/AC6 port Added the missing inline comment on the LDR r1, =0 instruction (Build value for SysTick reset) and the required AI-generated attribution comment under the copyright header. --------- Co-authored-by: Frédéric Desbiens Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Release 6.5.1.202602a preparation (#547)

2026-06-08T14:59:04Z

* Updated version number constants * Updated port version strings --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Added copyright headers to files missing them

2026-06-06T19:48:06Z

Applied the standard MIT license header to all project-owned C, header, assembly, shell, and Python files that were missing a copyright notice. Third-party, toolchain startup, and auto-generated files were excluded. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Release 6.5.1.202602 preparation (#543)

2026-06-03T20:55:01Z

* Updated version number constants * Updated port version strings --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

Updated copyright headers and version number constants (#509)

2026-03-05T09:46:30Z

* Updated version number constants * Removed revision history from all files * Added Eclipse ThreadX contributors' copyright header