/*************************************************************************** * Copyright (c) 2026 Eclipse ThreadX contributors * * This program and the accompanying materials are made available under the * terms of the MIT License which is available at * https://opensource.org/licenses/MIT. * * AI Disclosure: This file was largely AI-generated by Claude Code (Opus 5). * The AI-generated portions may be considered public domain (CC0-1.0) * and not subject to the project's licence. The human contributor has * reviewed and verified that the code is correct. * * SPDX-License-Identifier: MIT and CC0-1.0 **************************************************************************/ /* This test drives every memory byte pool service with event tracing enabled. Each service carries one in-line trace insert, and that insert behaves differently according to the system state it runs in, whether its event is filtered, whether it is the entry that wraps the trace buffer, and whether a buffer-full notification is registered. The test walks the services once per combination, so every service's insert is driven through all of them. Without event tracing compiled in the inserts expand to nothing, so the test only checks that the trace services report the feature as disabled. */ #include #include "tx_api.h" #define TX_SOURCE_CODE #include "tx_trace.h" #include "tx_initialize.h" /* Define the ISR dispatch. */ extern VOID (*test_isr_dispatch)(void); /* Define the services, in the order the test drives them. The scratch pool is created by the first and deleted by the last, and the memory the allocate takes from the resident pool is given back by the release that follows it, so a pass over the whole list leaves the system as it found it. */ #define BYTE_SERVICE_CREATE 0 #define BYTE_SERVICE_ALLOCATE 1 #define BYTE_SERVICE_RELEASE 2 #define BYTE_SERVICE_PRIORITIZE 3 #define BYTE_SERVICE_INFO_GET 4 #define BYTE_SERVICE_DELETE 5 #define BYTE_SERVICES 6 /* The services an ISR is allowed to call. The error checking shell rejects a create from an interrupt and a delete from any caller that is not a thread, and — unlike the block pool, which permits an allocate that does not ask to suspend — it rejects both the byte allocate and the byte release from an interrupt outright. */ #define BYTE_ISR_FIRST_SERVICE BYTE_SERVICE_PRIORITIZE #define BYTE_ISR_LAST_SERVICE BYTE_SERVICE_INFO_GET /* The resident pool is large enough that a pass that takes one fragment and gives it back never runs it out. */ #define BYTE_POOL_SIZE 512 #define BYTE_ALLOCATE_SIZE 32 static unsigned long thread_0_counter = 0; static TX_THREAD thread_0; static TX_BYTE_POOL pool_0; static TX_BYTE_POOL pool_1; static UCHAR pool_0_memory[BYTE_POOL_SIZE]; static UCHAR pool_1_memory[BYTE_POOL_SIZE]; static VOID *memory_ptr = TX_NULL; static ULONG buffer_full_count = 0; static ULONG isr_pass_done = 0; static UINT isr_status = TX_SUCCESS; /* The trace buffer is deliberately small. Several passes over the services fit in it many times over, so the wrap path is reached by ordinary use as well as by the positioned wrap below. */ static UCHAR trace_buffer[512]; #define TRACE_REGISTRY_ENTRIES 4 /* Define thread prototypes. */ static void thread_0_entry(ULONG thread_input); /* Prototype for test control return. */ void test_control_return(UINT status); /* Drive one byte pool service through its published entry point. */ static UINT byte_service(UINT service) { UINT status; switch (service) { case BYTE_SERVICE_CREATE: status = tx_byte_pool_create(&pool_1, "pool 1", pool_1_memory, sizeof(pool_1_memory)); break; case BYTE_SERVICE_ALLOCATE: status = tx_byte_allocate(&pool_0, &memory_ptr, BYTE_ALLOCATE_SIZE, TX_NO_WAIT); break; case BYTE_SERVICE_RELEASE: status = tx_byte_release(memory_ptr); break; case BYTE_SERVICE_PRIORITIZE: status = tx_byte_pool_prioritize(&pool_0); break; case BYTE_SERVICE_INFO_GET: status = tx_byte_pool_info_get(&pool_0, TX_NULL, TX_NULL, TX_NULL, TX_NULL, TX_NULL, TX_NULL); break; default: status = tx_byte_pool_delete(&pool_1); break; } return(status); } #ifdef TX_ENABLE_EVENT_TRACE /* Drive one byte pool service through its internal entry point. The error checking shell rejects a create, an allocate, a release and a delete from a non-zero system state, so the inserts inside those four services cannot be reached from a forced system state through the published entry points. The shell itself is covered by its own tests; what is under test here is the insert behind it. None of the six services reads the system state itself, so the internal entry point reaches every insert in every state. */ static UINT byte_service_internal(UINT service) { UINT status; switch (service) { case BYTE_SERVICE_CREATE: status = _tx_byte_pool_create(&pool_1, "pool 1", pool_1_memory, sizeof(pool_1_memory)); break; case BYTE_SERVICE_ALLOCATE: status = _tx_byte_allocate(&pool_0, &memory_ptr, BYTE_ALLOCATE_SIZE, TX_NO_WAIT); break; case BYTE_SERVICE_RELEASE: status = _tx_byte_release(memory_ptr); break; case BYTE_SERVICE_PRIORITIZE: status = _tx_byte_pool_prioritize(&pool_0); break; case BYTE_SERVICE_INFO_GET: status = _tx_byte_pool_info_get(&pool_0, TX_NULL, TX_NULL, TX_NULL, TX_NULL, TX_NULL, TX_NULL); break; default: status = _tx_byte_pool_delete(&pool_1); break; } return(status); } /* Run a pass over the services with the system state forced to the value the insert has to see. Interrupts are held off across the pass, so the timer thread cannot observe the forced state and the interrupt nesting count the same variable carries is restored before anything else reads it. The byte pool search restores interrupts to their previous posture rather than enabling them outright, so the lockout survives the allocate. */ static UINT pass_with_system_state(ULONG system_state) { TX_INTERRUPT_SAVE_AREA UINT service; UINT status = TX_SUCCESS; ULONG saved_system_state; TX_DISABLE saved_system_state = _tx_thread_system_state; _tx_thread_system_state = system_state; for (service = 0; service < BYTE_SERVICES; service++) { if (byte_service_internal(service) != TX_SUCCESS) { status = TX_NOT_DONE; } } _tx_thread_system_state = saved_system_state; TX_RESTORE return(status); } /* Position the trace buffer one entry short of its end, so that the next event inserted is the one that wraps it. A wrap reached by filling the buffer lands on whichever service happens to write the last entry; positioning puts each service's own insert on the boundary in turn. No service here writes a trace entry ahead of its own insert — the two pool creates register an object, but the object registry is not the event buffer — so one entry is the right distance for every one of them. */ static void position_at_buffer_end(void) { TX_INTERRUPT_SAVE_AREA TX_DISABLE _tx_trace_buffer_current_ptr = _tx_trace_buffer_end_ptr - 1; _tx_trace_header_ptr -> tx_trace_header_buffer_current_pointer = (ULONG) _tx_trace_buffer_current_ptr; TX_RESTORE } /* Run a pass over the services, wrapping the trace buffer on every one of them. */ static UINT pass_with_buffer_wrap(void) { UINT service; UINT status = TX_SUCCESS; for (service = 0; service < BYTE_SERVICES; service++) { position_at_buffer_end(); if (byte_service(service) != TX_SUCCESS) { status = TX_NOT_DONE; } } return(status); } /* Count the trace buffer wraps the kernel reports. */ static VOID trace_buffer_full(void *buffer) { buffer_full_count++; } /* Drive the services an ISR may call, once, from interrupt context. */ static void test_isr(void) { UINT service; if (isr_pass_done == 0) { for (service = BYTE_ISR_FIRST_SERVICE; service <= BYTE_ISR_LAST_SERVICE; service++) { if (byte_service(service) != TX_SUCCESS) { isr_status = TX_NOT_DONE; } } isr_pass_done = 1; } } #endif /* Define what the initial system looks like. */ #ifdef CTEST void test_application_define(void *first_unused_memory) #else void threadx_byte_pool_trace_application_define(void *first_unused_memory) #endif { UINT status; CHAR *pointer; /* Put first available memory address into a character pointer. */ pointer = (CHAR *) first_unused_memory; /* Put system definition stuff in here, e.g. thread creates and other assorted create information. */ status = tx_thread_create(&thread_0, "thread 0", thread_0_entry, 1, pointer, TEST_STACK_SIZE_PRINTF, 16, 16, TX_NO_TIME_SLICE, TX_AUTO_START); pointer = pointer + TEST_STACK_SIZE_PRINTF; /* Check for status. */ if (status != TX_SUCCESS) { printf("Running Byte Pool Trace Test....................................... ERROR #1\n"); test_control_return(1); } /* Create the pool the allocate, release, prioritize and information services are driven against. Every pass takes one fragment from it and gives the same fragment back. */ status = tx_byte_pool_create(&pool_0, "pool 0", pool_0_memory, sizeof(pool_0_memory)); /* Check for status. */ if (status != TX_SUCCESS) { printf("Running Byte Pool Trace Test....................................... ERROR #2\n"); test_control_return(1); } } /* Define the test thread. */ static void thread_0_entry(ULONG thread_input) { UINT status; UINT service; #ifdef TX_ENABLE_EVENT_TRACE ULONG wait; #endif /* Increment thread 0 counter. */ thread_0_counter++; /* Inform user of success getting to this test. */ printf("Running Byte Pool Trace Test....................................... "); /* Enable event tracing. */ status = tx_trace_enable(trace_buffer, sizeof(trace_buffer), TRACE_REGISTRY_ENTRIES); #ifndef TX_ENABLE_EVENT_TRACE /* Without tracing compiled in the inserts expand to nothing, so there is nothing here to drive. Check that the service says so and finish. */ if (status != TX_FEATURE_NOT_ENABLED) { printf("ERROR #3\n"); test_control_return(1); } /* One pass over the services, so the test still exercises them. */ for (service = 0; service < BYTE_SERVICES; service++) { if (byte_service(service) != TX_SUCCESS) { printf("ERROR #4\n"); test_control_return(1); } } printf("SUCCESS!\n"); test_control_return(0); #else if (status != TX_SUCCESS) { printf("ERROR #5\n"); test_control_return(1); } /* Thread context, every event enabled: the insert runs and takes the current thread's priority. */ for (service = 0; service < BYTE_SERVICES; service++) { if (byte_service(service) != TX_SUCCESS) { printf("ERROR #6\n"); test_control_return(1); } } /* Byte pool events filtered out: the insert is reached and declines to record anything. */ status = tx_trace_event_filter(TX_TRACE_BYTE_POOL_EVENTS); if (status != TX_SUCCESS) { printf("ERROR #7\n"); test_control_return(1); } for (service = 0; service < BYTE_SERVICES; service++) { if (byte_service(service) != TX_SUCCESS) { printf("ERROR #8\n"); test_control_return(1); } } status = tx_trace_event_unfilter(TX_TRACE_BYTE_POOL_EVENTS); if (status != TX_SUCCESS) { printf("ERROR #9\n"); test_control_return(1); } /* Interrupt context: the insert records the interrupted thread instead of a priority. Bounded, so a tick that never arrives fails the test rather than hanging it. */ test_isr_dispatch = test_isr; wait = 0; while ((isr_pass_done == 0) && (wait < 100)) { tx_thread_sleep(1); wait++; } test_isr_dispatch = TX_NULL; if (isr_pass_done == 0) { printf("ERROR #10\n"); test_control_return(1); } if (isr_status != TX_SUCCESS) { printf("ERROR #11\n"); test_control_return(1); } /* Initialization context: the insert has no thread to record at all. */ if (pass_with_system_state(TX_INITIALIZE_IN_PROGRESS) != TX_SUCCESS) { printf("ERROR #12\n"); test_control_return(1); } /* The same state an ISR presents, for the services an ISR may not call. */ if (pass_with_system_state((ULONG) 1) != TX_SUCCESS) { printf("ERROR #13\n"); test_control_return(1); } /* Wrap the trace buffer on every service with no notification registered, then again with one. */ if (pass_with_buffer_wrap() != TX_SUCCESS) { printf("ERROR #14\n"); test_control_return(1); } status = tx_trace_buffer_full_notify(trace_buffer_full); if (status != TX_SUCCESS) { printf("ERROR #15\n"); test_control_return(1); } if (pass_with_buffer_wrap() != TX_SUCCESS) { printf("ERROR #16\n"); test_control_return(1); } /* Every service in the last pass wrapped the buffer, so the notification has to have been called once for each of them. */ if (buffer_full_count < BYTE_SERVICES) { printf("ERROR #17\n"); test_control_return(1); } status = tx_trace_buffer_full_notify(TX_NULL); if (status != TX_SUCCESS) { printf("ERROR #18\n"); test_control_return(1); } status = tx_trace_disable(); if (status != TX_SUCCESS) { printf("ERROR #19\n"); test_control_return(1); } printf("SUCCESS!\n"); test_control_return(0); #endif }