tinyusb.git, branch codex/dfu-buffer-fix

device/dfu: fix transfer buffer overwrite issue

2026-07-29T19:07:25Z

Signed-off-by: HiFiPhile

Merge pull request #3796 from geurtv/master

2026-07-29T18:14:44Z

rp2xxx: added rp2usb_deinit() to fix 'No spinlocks are available'

hil: split hil_test.py into hil_lock/hil_flash, add pool_check, update rig probes (#3794)

2026-07-29T10:29:59Z

test/hil: add board-pool health check, split hil_test into focused modules (#3794) Add test/hil/hil_pool_check.py: per-board rig health scan — probe presence, light-example flash (dfu_runtime; device_info + serial check for host-only boards), uid re-enumeration, safe recovery (probe authorized-toggle, board reset), verified board_test re-park, USB topology report, and a markdown summary table. Missing firmware is built on the spot (tools/build.py, idf.py for espressif, one get_deps retry); row statuses: ok, flash-failed, failed, locked. Board locks are always respected, never bypassed. Refactor hil_test.py into hil_lock.py (flock protocol, controller permits, hold/release/status CLI; replaces board_lock.py) and hil_flash.py (flashers, find_firmware, run_cmd). Update WCH probe uids and the board roster in tinyusb.json; add the hil-pool-check skill.

also added rp2usb_deinit() call to hcd_deinit()

2026-07-29T10:00:59Z

rp2xxx: added rp2usb_deinit() to fix 'No spinlocks are available'

2026-07-29T09:36:01Z

Merge pull request #3784 from AnthonyV-modretro/master

2026-07-29T08:09:48Z

Add More HID Usage Page enums

Merge pull request #3792 from hathach/claude/openocd-docs

2026-07-28T07:51:38Z

docs: add the unified OpenOCD plan, note worktree dep symlinks

2026-07-28T07:43:32Z

The plan doc records why the fork exists and how each vendor source was ported; the interim handoff it superseded is dropped. CLAUDE.md: a new worktree should symlink the dependency dirs to the primary checkout rather than re-fetching them, replacing a single symlink only when the branch needs a different dep revision. Also allow 'linke' in codespell - WCH-LinkE is a product name.

bsp, hil: flash WCH boards with the unified OpenOCD fork (#3791)

2026-07-28T05:50:28Z

bsp, hil: flash with the unified OpenOCD fork https://github.com/hathach/openocd (branch tinyusb) is mainline plus every config these boards need: RPi RP2350, ADI max32/max78, the MounRiver WCH configs, and the wlinke adapter on mainline's riscv target. It is a superset of the vendor forks, so one 'openocd' covers all boards; -DOPENOCD=/OPENOCD= still select another, msdk's when MAXIM_PATH is set. Drops family_flash_openocd_wch and the OPENOCD_WCH pair, dedups family_flash_openocd_adi, aligns ch583's work area, and points hil at the flasher's own config instead of generating one per probe. Verified: HIL green on all four WCH boards and max32666fthr.

Address Codex feedback on spelling

2026-07-27T22:48:59Z