tinyusb.git/docs/reference, branch dcd_ch32hs_spd

hw/bsp+wch: rename the CH58x family to ch583 and OPT_MCU_CH58X to OPT_MCU_CH583

2026-06-22T08:23:08Z

The BSP family and MCU option were named "ch58x"/"CH58X", but the supported part is the CH583/CH582 (and the SDK repo is openwch/ch583); CH585 is a separate MCU family, so the CH58x umbrella was misleading. Rename to the specific family: - hw/bsp/ch58x -> hw/bsp/ch583 (dir), and the BSP-local files ch58x_it.* -> ch583_it.*, system_ch58x.* -> system_ch583.* (include guards/refs updated). The vendor SDK files (CH58x_common.h, CH58x_*.c in hw/mcu/wch/ch583) keep their names. - OPT_MCU_CH58X -> OPT_MCU_CH583 in tusb_option.h, tusb_mcu.h, and the shared WCH USBFS driver (ch32_usbfs_reg.h, dcd_ch32_usbfs.c). OPT_MCU_CH582 is kept as an alias (same value), so either name selects the same code. - FAMILY_MCUS CH58X -> CH583, CFG_TUSB_MCU=OPT_MCU_CH583, mcu:CH58X -> mcu:CH583 in the example skip lists, the CI build matrix (ci_set_matrix.py), the get_deps family tag, and docs/reference/boards.rst. Board names (ch582m_evt, yd-ch582m) are unchanged. Verified: make + cmake build for ch582m_evt, and ci.lan HIL (all device examples pass). Co-Authored-By: Claude Opus 4.8 (1M context)

Merge remote-tracking branch 'origin/master' into add-ch58x-usbfs

2026-06-18T08:31:03Z

Merge remote-tracking branch 'origin/master' into stm32c5

2026-06-11T10:20:15Z

# Conflicts: # README.rst

docs: revert USBFS non-ISO transfer qualification in device_issues

2026-06-02T16:59:14Z

Restore original "Other types of transfers are not affected" statement, removing the conditional USBHS_INT_BUSY_EN / USBFS-unconfirmed wording. Co-authored-by: Zixun LI

docs: fix review issues in device_issues and README

2026-06-02T16:01:23Z

- Remove duplicate toctree entry for reference/device_issues from docs/index.rst (already included via docs/reference/index.rst) - Fix WCH section title: CH32V10X/CH32V20X/CH32V30X → CH32F20x/CH32V20x/CH32V30x to match the three actual README table entries (CH32F20x, CH32V20x, CH32V305/307) - Update README anchor links to match the renamed section - Qualify USBFS non-ISO transfer safety claim: USBHS is protected by USBHS_INT_BUSY_EN but USBFS behavior is not yet confirmed - Fix LPC54600 note: "read errata" → "see device issues" - Remove "totally" from LPC54600 description Co-authored-by: Ha Thach

Merge remote-tracking branch 'tinyusb/master' into ch32_warning

2026-06-02T09:03:50Z

Signed-off-by: HiFiPhile

rename to device issues

2026-06-02T08:43:55Z

Signed-off-by: HiFiPhile

Merge remote-tracking branch 'tinyusb/master' into stm32c5

2026-05-24T16:46:26Z

Signed-off-by: HiFiPhile

midi2: convert to raw Tx FIFO for better segmentation handling, add count to packet api

2026-05-18T21:07:49Z

Signed-off-by: HiFiPhile

fix: address PR review feedback for MIDI 2.0 drivers

2026-05-12T14:07:44Z

Host driver (midi2_host.c): - midih2_open() now returns actual parsed length instead of max_len, preventing composite device interface conflicts - Parsers (alt0/alt1) refactored to return const uint8_t* end pointer following midi_host.c switch/case pattern - Alt 1 CS Endpoint now parses MIDI 2.0 layout (bNumGrpTrmBlk at offset 3 with MIDI_CS_ENDPOINT_GENERAL_2_0 subtype check) instead of reusing MIDI 1.0 struct (bNumEmbMIDIJack) - midih2_set_config() now issues SET_INTERFACE control request via tuh_interface_set() before completing configuration. Falls back to alt 0 if SET_INTERFACE fails - Extracted midih2_set_config_complete() and midih2_set_interface_cb() for async SET_INTERFACE handling Device driver (midi2_device.c): - midi2d_open() skip loop now checks bInterfaceNumber, stopping at interfaces that belong to other functions in composite devices - SET_INTERFACE handler now rejects alt > 1 (returns false/stall) - Named constants for GTB descriptor types and MIDI protocol values Descriptor macros (usbd.h): - TUD_MIDI2_DESC_ALT1_HEAD: iInterface set to 0 (consistent with Alt 0), wTotalLength now uses TUD_MIDI2_DESC_ALT1_CS_LEN to cover all Alt 1 class-specific descriptors - TUD_MIDI2_DESC_ALT1_EP: now accepts GTB ID list via variadic args, emitting complete CS endpoint descriptor Host example: - CMakeLists.txt restricted to rp2040 family (display.c requires Pico SDK headers) - display.c: null terminator after strncpy in log scroll Documentation: - class_drivers.rst updated to reflect SET_INTERFACE behavior and auto-select with fallback Addresses: Codex P1 (#1, #2, #3), Copilot (#4-#9)