Add SuperSpeed descriptors to all bulk/interrupt class drivers and examples

2026-07-07T11:12:02Z

Class drivers: skip and account the SS endpoint companion descriptor in every descriptor walk (hid, midi, midi2, ecm_rndis, printer, mtp, usbtmc), via a shared usbd_skip_ss_ep_companion() helper in usbd_pvt.h (cdc/ncm already handled; vendor/dfu naturally tolerant). usbtmc buffer grows to 1024 at SS to satisfy its packet-multiple assert. bth/audio/video are left FS/HS-only (ISO-centric; ISO is unsupported on the CH569 dcd). usbd.h: new SS template macros TUD_HID_SS_DESCRIPTOR(+INOUT), TUD_MIDI_SS_DESCRIPTOR (+ DESC_EP_SS part), TUD_MIDI2_DESC_ALT1_EP_SS, TUD_PRINTER_SS_DESCRIPTOR, TUD_MTP_SS_DESCRIPTOR, TUD_USBTMC_BULK_SS_DESCRIPTORS/INT_SS_DESCRIPTOR, with _SS_DESC_LEN counterparts (bulk endpoints hardcode 1024, companion after every EP). Examples: 17 bulk/interrupt examples gain the full SS descriptor set (EP0 512/64 clamp, SS device descriptor bcdUSB 3.20 mps0=2^9, SS config with companions, BOS caps, speed-switched callbacks): cdc_dual_ports, cdc_msc_freertos, dfu, dfu_runtime, dynamic_configuration, hid_boot_interface, hid_composite(+freertos), hid_generic_inout, hid_multiple_interface, midi_test(+freertos), midi2_device, msc_dual_lun, mtp, printer_to_cdc, usbtmc, webusb_serial. msc_dual_lun is un-skipped for CH569 using read-only flash disks (16KB RAM can't hold two 8KB RAM disks, same as ch32v10x/v20x boards). Validation: full example sweep green for hydrausb3_v1 (SPEED=super, 19 device ELFs) and raspberry_pi_pico; wTotalLength == sizeof() verified for every SS configuration array in the built ELFs; ceedling 65/65; pre-commit clean; code-size delta +0.0% on rp2040 (SS code folds out on non-SS builds). Co-Authored-By: Claude Fable 5 Claude-Session: https://claude.ai/code/session_019MRGjBT2NBkCoWwyDT4LaE

fix Identifiers that start with '__' or '_[A-Z]' are reserved.

2025-10-28T07:14:01Z

fix compiling with nuc family

more example update

2022-06-06T15:41:04Z

rename board specific macro for example

2022-06-01T16:53:40Z

- BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT - BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED

auto detect max rhport speed based on mcu

2022-02-25T11:35:21Z

Add FT9xx to more examples which support High-Speed

2021-12-08T10:03:33Z

correctly init hs phy for bcm

2021-10-28T17:53:30Z

Fix merge error.

2021-07-17T18:44:44Z

Fix resume, always init FS clock.

2021-06-15T15:53:09Z

Signed-off-by: MasterPhi

rp2040 hid_composite compiled and tested

2021-01-23T17:54:58Z

tinyusb.git/examples/device/hid_composite/src/tusb_config.h, branch worktree-ch569-hydrausb3