tinyusb.git/examples/device/midi2_device, branch worktree-ch569-hydrausb3

Add SuperSpeed descriptors to all bulk/interrupt class drivers and examples

2026-07-07T11:12:02Z

Class drivers: skip and account the SS endpoint companion descriptor in every descriptor walk (hid, midi, midi2, ecm_rndis, printer, mtp, usbtmc), via a shared usbd_skip_ss_ep_companion() helper in usbd_pvt.h (cdc/ncm already handled; vendor/dfu naturally tolerant). usbtmc buffer grows to 1024 at SS to satisfy its packet-multiple assert. bth/audio/video are left FS/HS-only (ISO-centric; ISO is unsupported on the CH569 dcd). usbd.h: new SS template macros TUD_HID_SS_DESCRIPTOR(+INOUT), TUD_MIDI_SS_DESCRIPTOR (+ DESC_EP_SS part), TUD_MIDI2_DESC_ALT1_EP_SS, TUD_PRINTER_SS_DESCRIPTOR, TUD_MTP_SS_DESCRIPTOR, TUD_USBTMC_BULK_SS_DESCRIPTORS/INT_SS_DESCRIPTOR, with _SS_DESC_LEN counterparts (bulk endpoints hardcode 1024, companion after every EP). Examples: 17 bulk/interrupt examples gain the full SS descriptor set (EP0 512/64 clamp, SS device descriptor bcdUSB 3.20 mps0=2^9, SS config with companions, BOS caps, speed-switched callbacks): cdc_dual_ports, cdc_msc_freertos, dfu, dfu_runtime, dynamic_configuration, hid_boot_interface, hid_composite(+freertos), hid_generic_inout, hid_multiple_interface, midi_test(+freertos), midi2_device, msc_dual_lun, mtp, printer_to_cdc, usbtmc, webusb_serial. msc_dual_lun is un-skipped for CH569 using read-only flash disks (16KB RAM can't hold two 8KB RAM disks, same as ch32v10x/v20x boards). Validation: full example sweep green for hydrausb3_v1 (SPEED=super, 19 device ELFs) and raspberry_pi_pico; wTotalLength == sizeof() verified for every SS configuration array in the built ELFs; ceedling 65/65; pre-commit clean; code-size delta +0.0% on rp2040 (SS code folds out on non-SS builds). Co-Authored-By: Claude Fable 5 Claude-Session: https://claude.ai/code/session_019MRGjBT2NBkCoWwyDT4LaE

Merge pull request #3738 from sauloverissimo/fix/midi2-fb-direction

2026-07-05T15:46:14Z

feat(midi2): derive function blocks from the GTB descriptor

docs: add build-doc tooling and a README for every example

2026-06-29T03:16:25Z

Documentation tooling: - Add the `build-doc` skill and `tools/build_doc.py` wrapper for local Sphinx builds (clean / -W / open). - Enable Markdown (MyST) in conf.py and auto-collect examples/{device,host,dual}/*/README.md into a 3-level Examples nav (Examples > Device/Host/Dual > example), noting each page's source location and normalizing headings to a single H1. - Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md Documentation section at the skill. Example docs: - Add a README.md for every device/host/dual example: what it does, USB interface table, notable tusb_config.h settings, generic CMake + Make build steps, and how to try it. - Fold each *_freertos variant into its base README, noting the FreeRTOS source path and any RTOS-specific behavior. Generated docs/examples/ output is git-ignored. Builds clean with `sphinx-build -W`. Co-Authored-By: Claude Opus 4.8 (1M context)

example(midi2): update example to demonstrate multiple fb

2026-06-28T19:34:35Z

Adds two Group Terminal Blocks (output and input) with names and per-direction endpoint association, plus an explicit endpoint name.

Fix one direction endpoint examples

2026-06-14T12:25:02Z

ci: fix IAR Pe111 and stm32h7s3 flash overflow

2026-05-29T17:11:19Z

- examples/device/midi2_device/src/main.c: drop the unreachable `return 0;` after the `while(1)` superloop. IAR with --warnings_are_errors rejects Pe111 (statement is unreachable); C99 lets `int main` fall off the end, matching midi_test. - examples/host/msc_file_explorer_freertos/skip.txt: skip stm32h7s3nucleo. The board has only 64 KB on-chip FLASH and the FreeRTOS + FatFS host MSC explorer now overflows by ~248 bytes after the async control queue refactor. Co-Authored-By: Claude Opus 4.7

midi2_device: gate -Wno-type-limits to GCC/Clang for IAR build

2026-05-29T16:59:15Z

iccarm rejects -Wno-type-limits, breaking the hil-hfp-iar CI matrix (stm32l412nucleo, stm32f746disco, lpcxpresso43s67). Apply the same CMAKE_C_COMPILER_ID guard used in hw/bsp/family_support.cmake so IAR builds skip the flag without losing the GCC warning suppression. Co-Authored-By: Claude Opus 4.7

update example

2026-05-18T21:08:03Z

Signed-off-by: HiFiPhile

midi2: drain pattern for RX FIFO

2026-05-17T22:56:04Z

Default RX/TX buffers to EPSIZE for both device and host. Document drain-in-loop on ump_read; example device callback drains until empty.

bsp: fix tcpp0203 lto uninit error

2026-05-17T12:05:03Z

Signed-off-by: HiFiPhile