tinyusb.git/hw/bsp/ch32v30x, branch claude/add-systemview-debug

sysview: take the timestamp from a BSP hardware timer where the core has no DWT

2026-09-03T21:21:57Z

Cortex-M0/M0+, the WCH RISC-V parts and MAX3266x have no usable DWT cycle counter, so their family.c provides SEGGER_SYSVIEW_X_GetTimestamp() from a free-running hardware timer: a 32-bit general-purpose timer on ST parts (sysview_stm32_tim2.h), SysTick-extended sources on the M0 families, the core's SysTick-equivalent on WCH with the documented ordered read of the split count registers (sysview_wch_timestamp.h), and a TMR on MAX3266x (sysview_max32_tmr.h). max32666fthr's DWT implements only watchpoint comparators (DWT_CTRL.NOCYCCNT=1 read live; UG6971 documents no DWT/trace at all), so SystemView's ARMv7-M default read 0xE0001004 as a frozen 0 and every duration decoded as zero. The TMR runs at 48 MHz (f_PCLK = f_SYS_CLK/2; Continuous mode, CMP=0xFFFFFFFF, prescaler 1 - UG6971 15.2 guarantees TMRn_CNT readable while counting); TMR0 by default - present on every MAX32 part, unused by the examples, FreeRTOS ticks on SysTick - overridable with -DSYSVIEW_MAX32_TMR=n. The family builds SystemView with SEGGER_SYSVIEW_CORE_OTHER and sets CFG_TUSB_SYSVIEW_TIMESTAMP_BSP, a tusb_sysview.c opt-in for ARMv7-M parts without CYCCNT where the BSP also reports the rate via SEGGER_SYSVIEW_X_GetTimestampFreq(); the fixed-1MHz microsecond contract is unreachable on a powers-of-two-only prescaler. SEGGER_SYSVIEW_X_GetInterruptId() gains the ICSR.VECTACTIVE read for CORE_OTHER builds. MAX32650/32690 use different GCR clock-gate names and stay unported. Measured on the rig: seven host-timed 1.000 s gaps at 1.00044-1.00091 (median +0.05%). stm32f0 refuses to configure SYSVIEW for stm32f070xb at CMake time: that variant has no TIM2 at all, and the alternative was an undefined-reference link error with no hint. The shared hw/bsp/sysview_*.h join ci_select rule 16's hw/bsp file list (cross-family build files, compiled only under -DSYSVIEW which no CI leg enables), mirrored in the spec's rule table, so master's classification guard resolves them on both axes.

bsp, hil: flash WCH boards with the unified OpenOCD fork (#3791)

2026-07-28T05:50:28Z

bsp, hil: flash with the unified OpenOCD fork https://github.com/hathach/openocd (branch tinyusb) is mainline plus every config these boards need: RPi RP2350, ADI max32/max78, the MounRiver WCH configs, and the wlinke adapter on mainline's riscv target. It is a superset of the vendor forks, so one 'openocd' covers all boards; -DOPENOCD=/OPENOCD= still select another, msdk's when MAXIM_PATH is set. Drops family_flash_openocd_wch and the OPENOCD_WCH pair, dedups family_flash_openocd_adi, aligns ch583's work area, and points hil at the flasher's own config instead of generating one per probe. Verified: HIL green on all four WCH boards and max32666fthr.

bsp(ch32): naked fsdev ISRs so nested USBD IRQs return safely

2026-07-09T16:38:48Z

The three USBD lines nest under QingKe HWSTK; gcc's interrupt prologue corrupts the return, so rely on the hardware stack and bare mret. Co-Authored-By: Claude Fable 5 Claude-Session: https://claude.ai/code/session_01HeF2gZ1M7GWkz6Av4BpKPg

bsp/ch32: fix linker report 100% RAM usage

2026-05-22T13:25:24Z

Signed-off-by: HiFiPhile

remove IAR toolchain support from make build system

2026-04-06T04:17:34Z

IAR is only supported with CMake. Remove all IAR-specific references from the Make build system including toolchain files, SRC_S_IAR, LD_FILE_IAR variables, and IAR toolchain detection. Also fix GET_SECTOR_COUNT truncation in msc_file_explorer and broken formatting in stm32f7 board_uart_write. Co-Authored-By: Claude Opus 4.6 (1M context)

implement board_uart_read()/write() as non-blocking for all families

2026-04-04T06:20:58Z

replace board_millis() with tusb_time_millis_api()

2026-02-27T17:01:40Z

fix warning with strict prototypes warnings

2025-10-28T04:10:29Z

disable warning for startup file

2025-10-27T17:15:39Z

refactor family.cmake: rename add_board_target() to family_add_board() and move it to family_configure_common()

2025-10-22T19:23:20Z

also move startup and linker from board target to actual exe