tinyusb.git/hw/bsp/rp2040/boards/raspberry_pi_pico2, branch codex/class-reference-docsUnnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/tinyusb.git/atom/hw/bsp/rp2040/boards/raspberry_pi_pico2?h=codex%2Fclass-reference-docs2026-07-24T08:56:14Zrp2040: RP2350/pico2 ETM trace over fly-wired MIPI-202026-07-24T08:56:14Zhathachthach@tinyusb.org2026-07-24T08:28:53Zurn:sha1:e90d232b7718656a627775e3ecde63c6fc7c2e84
J-Link's built-in RP2350 script owns the whole chip-side path (component
map is not ROM-table-discoverable; a custom JLinkScript replaces the
built-in one and kills pin trace), re-arming at every resume - firmware
does no trace setup. TRACE_ETM builds pin clk_sys to 48 MHz from crt0
(fly-wire seating-proof; the port is DDR at clk_sys/2 and the J-Trace PRO
V2 cliff sits just above 40 MHz TRACECLK - SEGGER requires V3.0+ for this
chip), clear TIMER0/1 DBGPAUSE (default freezes the us-timer while any
core is debug-halted and sleep_ms spins forever), and run the UART console
TX-only (GPIO1 = default UART0 RX = TRACECLK).
add missing board.h for BOARD=pico_sdk2025-02-28T05:04:54Zhathachthach@tinyusb.org2025-02-28T05:04:54Zurn:sha1:c1df796a7c463dad43e709a2df145d6e24cd96a4add fruitjam bsp2025-02-20T08:47:29Zhathachthach@tinyusb.org2025-02-20T08:47:29Zurn:sha1:6572c1da0d6ad2f298ef97189ca4b288f710f49aadd pico2 rp2350 (arm) board2024-09-13T12:12:26Zhathachthach@tinyusb.org2024-09-13T12:12:26Zurn:sha1:c419b1e7c57ab701c904adfe6ebf14f780862557
add pico2 to hil ci