tinyusb.git/hw/bsp/rp2040/boards, branch codex/class-reference-docs Unnamed repository; edit this file 'description' to name the repository. http://cgit.235523.xyz/tinyusb.git/atom/hw/bsp/rp2040/boards?h=codex%2Fclass-reference-docs 2026-07-24T08:56:14Z rp2040: RP2350/pico2 ETM trace over fly-wired MIPI-20 2026-07-24T08:56:14Z hathach thach@tinyusb.org 2026-07-24T08:28:53Z urn:sha1:e90d232b7718656a627775e3ecde63c6fc7c2e84 J-Link's built-in RP2350 script owns the whole chip-side path (component map is not ROM-table-discoverable; a custom JLinkScript replaces the built-in one and kills pin trace), re-arming at every resume - firmware does no trace setup. TRACE_ETM builds pin clk_sys to 48 MHz from crt0 (fly-wire seating-proof; the port is DDR at clk_sys/2 and the J-Trace PRO V2 cliff sits just above 40 MHz TRACECLK - SEGGER requires V3.0+ for this chip), clear TIMER0/1 DBGPAUSE (default freezes the us-timer while any core is debug-halted and sleep_ms spins forever), and run the UART console TX-only (GPIO1 = default UART0 RX = TRACECLK). add hil test for host msc and cdc 2026-03-17T14:38:46Z hathach thach@tinyusb.org 2026-03-17T14:38:46Z urn:sha1:45e80a1042ea802b74ebe97db350f9da17cb2fe4 ci add pico_w for native host test 2025-04-17T04:22:38Z hathach thach@tinyusb.org 2025-04-17T04:22:38Z urn:sha1:f479b02ea6110d2b7703ae96763535b7ec2bbde1 add adafruit metro rp2350 2025-03-04T15:42:27Z hathach thach@tinyusb.org 2025-03-04T15:38:17Z urn:sha1:7dbad0a23e69cde6173f09357419c4257a0ed09c add missing board.h for BOARD=pico_sdk 2025-02-28T05:04:54Z hathach thach@tinyusb.org 2025-02-28T05:04:54Z urn:sha1:c1df796a7c463dad43e709a2df145d6e24cd96a4 pio-usb now only need sysclk to be multiple of 12Mhz 2025-02-20T15:18:33Z hathach thach@tinyusb.org 2025-02-20T15:16:05Z urn:sha1:61aab7a86aaaf5c254ba5d14a04ff44aec8623d3 change pio-usb to wip fork for testing 2025-02-20T09:16:07Z hathach thach@tinyusb.org 2025-02-20T09:01:06Z urn:sha1:cafc788508834b71248a91773a262542fc2cad37 add fruitjam bsp 2025-02-20T08:47:29Z hathach thach@tinyusb.org 2025-02-20T08:47:29Z urn:sha1:6572c1da0d6ad2f298ef97189ca4b288f710f49a add pico2 rp2350 (arm) board 2024-09-13T12:12:26Z hathach thach@tinyusb.org 2024-09-13T12:12:26Z urn:sha1:c419b1e7c57ab701c904adfe6ebf14f780862557 add pico2 to hil ci fix build with rp2040 + max3421 2024-04-04T03:55:14Z hathach thach@tinyusb.org 2024-04-04T03:55:14Z urn:sha1:7910cc298187327e05c43770b58eac528a4fecfa - forward MAX3421_HOST=1 from makefile to cmake - add feather_rp2040_max3421 board to run with ci for rp2040 + max3421