tinyusb.git/hw/bsp/stm32h743eval/board.mk, branch codex/class-reference-docsUnnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/tinyusb.git/atom/hw/bsp/stm32h743eval/board.mk?h=codex%2Fclass-reference-docs2021-03-03T13:07:17Zgroup h743eval and h743nucleo into stm32h72021-03-03T13:07:17Zhathachthach@tinyusb.org2021-03-03T13:07:17Zurn:sha1:5799c471f1214f3a3069b494c5e023e88f63e420
tested and work well
use cmsis 5 for all stm322020-10-30T07:14:28Zhathachthach@tinyusb.org2020-10-30T07:14:28Zurn:sha1:a6efe475e7b68b5fbba371a1a73ecf474ef226c4h7 use offical st driver repo2020-10-30T06:28:14Zhathachthach@tinyusb.org2020-10-30T06:28:14Zurn:sha1:3659d8e89a8918f27d339cbc3688301b5ed2b2d8clean up jlink default interface2020-10-08T10:17:37Zhathachthach@tinyusb.org2020-10-08T10:17:37Zurn:sha1:ec018fbf4ed30b014b82f993246f8730687e649achange default port some stm bsp2020-07-02T04:58:40Zhathachthach@tinyusb.org2020-07-02T04:58:40Zurn:sha1:9a290febcdd7aaa50657f3d31da31bd493fa3a0e
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
adding speed detect on bus reset2020-06-01T06:40:18Zhathachthach@tinyusb.org2020-06-01T06:40:18Zurn:sha1:e92118635cc8055a5ca599eaf9919d99a55bf584adding h743 uart, but not enabled yet since it conflict with OTG_FS22020-05-26T18:14:52Zhathachthach@tinyusb.org2020-05-26T18:14:52Zurn:sha1:227bffe04b5d61e49a6f7e777c12e1efd7b498d1update h743eval with rhport=1 highspeed2020-05-26T15:15:00Zhathachthach@tinyusb.org2020-05-26T15:11:26Zurn:sha1:0482f0d6867835d3dbb3939452fbcfaf9727b555wip2020-05-26T05:18:36Zhathachthach@tinyusb.org2020-05-26T05:18:18Zurn:sha1:62a746bdc7dc677cabeba9ef6f1dd974de1c0791board test work fine2020-05-23T06:29:30Zhathachthach@tinyusb.org2020-05-23T06:29:30Zurn:sha1:ba9c774a2a5f784a85de1ca1212268b367046c03