tinyusb.git/hw/bsp/stm32u0, branch claude/add-systemview-debug

sysview: take the timestamp from a BSP hardware timer where the core has no DWT

2026-09-03T21:21:57Z

Cortex-M0/M0+, the WCH RISC-V parts and MAX3266x have no usable DWT cycle counter, so their family.c provides SEGGER_SYSVIEW_X_GetTimestamp() from a free-running hardware timer: a 32-bit general-purpose timer on ST parts (sysview_stm32_tim2.h), SysTick-extended sources on the M0 families, the core's SysTick-equivalent on WCH with the documented ordered read of the split count registers (sysview_wch_timestamp.h), and a TMR on MAX3266x (sysview_max32_tmr.h). max32666fthr's DWT implements only watchpoint comparators (DWT_CTRL.NOCYCCNT=1 read live; UG6971 documents no DWT/trace at all), so SystemView's ARMv7-M default read 0xE0001004 as a frozen 0 and every duration decoded as zero. The TMR runs at 48 MHz (f_PCLK = f_SYS_CLK/2; Continuous mode, CMP=0xFFFFFFFF, prescaler 1 - UG6971 15.2 guarantees TMRn_CNT readable while counting); TMR0 by default - present on every MAX32 part, unused by the examples, FreeRTOS ticks on SysTick - overridable with -DSYSVIEW_MAX32_TMR=n. The family builds SystemView with SEGGER_SYSVIEW_CORE_OTHER and sets CFG_TUSB_SYSVIEW_TIMESTAMP_BSP, a tusb_sysview.c opt-in for ARMv7-M parts without CYCCNT where the BSP also reports the rate via SEGGER_SYSVIEW_X_GetTimestampFreq(); the fixed-1MHz microsecond contract is unreachable on a powers-of-two-only prescaler. SEGGER_SYSVIEW_X_GetInterruptId() gains the ICSR.VECTACTIVE read for CORE_OTHER builds. MAX32650/32690 use different GCR clock-gate names and stay unported. Measured on the rig: seven host-timed 1.000 s gaps at 1.00044-1.00091 (median +0.05%). stm32f0 refuses to configure SYSVIEW for stm32f070xb at CMake time: that variant has no TIM2 at all, and the alternative was an undefined-reference link error with no hint. The shared hw/bsp/sysview_*.h join ci_select rule 16's hw/bsp file list (cross-family build files, compiled only under -DSYSVIEW which no CI leg enables), mirrored in the spec's rule table, so master's classification guard resolves them on both axes.

stm32u0: implement board_get_unique_id from UID_BASE

2026-06-08T07:34:47Z

Previously stm32u0 had no board_get_unique_id(), so it fell back to the weak default in hw/bsp/board.c and every board reported the placeholder USB serial 0123456789ABCDEF. HIL identifies boards by USB serial, so a non-unique serial collides on a multi-board rig. Read the 96-bit unique ID from UID_BASE, mirroring stm32u5. Verified on stm32u083nucleo: now enumerates as 300044000D5036394E373620. Co-Authored-By: Claude Opus 4.8 (1M context)

ensure board_uart_write return -1 on default

2026-04-29T20:00:05Z

Signed-off-by: HiFiPhile

remove IAR toolchain support from make build system

2026-04-06T04:17:34Z

IAR is only supported with CMake. Remove all IAR-specific references from the Make build system including toolchain files, SRC_S_IAR, LD_FILE_IAR variables, and IAR toolchain detection. Also fix GET_SECTOR_COUNT truncation in msc_file_explorer and broken formatting in stm32f7 board_uart_write. Co-Authored-By: Claude Opus 4.6 (1M context)

update stm32 to use better uart id

2026-04-03T12:38:07Z

stm32 add uart hwfifo if supported, otherwise usb tu_fifo_t for receive uart in irq

2026-04-03T09:33:03Z

add missing stm32u083nucleo board files

2026-03-16T15:30:03Z

The board.cmake, board.mk, and board.h were created but not included in the previous commit, causing CI cmake failure. Co-Authored-By: Claude Opus 4.6

add stm32u083nucleo board

2026-03-16T08:15:23Z

replace board_millis() with tusb_time_millis_api()

2026-02-27T17:01:40Z

Merge remote-tracking branch 'tinyusb/master' into hcd_fsdev

2025-11-26T10:10:34Z