tinyusb.git/src/class/midi, branch worktree-ch569-hydrausb3

Add SuperSpeed descriptors to all bulk/interrupt class drivers and examples

2026-07-07T11:12:02Z

Class drivers: skip and account the SS endpoint companion descriptor in every descriptor walk (hid, midi, midi2, ecm_rndis, printer, mtp, usbtmc), via a shared usbd_skip_ss_ep_companion() helper in usbd_pvt.h (cdc/ncm already handled; vendor/dfu naturally tolerant). usbtmc buffer grows to 1024 at SS to satisfy its packet-multiple assert. bth/audio/video are left FS/HS-only (ISO-centric; ISO is unsupported on the CH569 dcd). usbd.h: new SS template macros TUD_HID_SS_DESCRIPTOR(+INOUT), TUD_MIDI_SS_DESCRIPTOR (+ DESC_EP_SS part), TUD_MIDI2_DESC_ALT1_EP_SS, TUD_PRINTER_SS_DESCRIPTOR, TUD_MTP_SS_DESCRIPTOR, TUD_USBTMC_BULK_SS_DESCRIPTORS/INT_SS_DESCRIPTOR, with _SS_DESC_LEN counterparts (bulk endpoints hardcode 1024, companion after every EP). Examples: 17 bulk/interrupt examples gain the full SS descriptor set (EP0 512/64 clamp, SS device descriptor bcdUSB 3.20 mps0=2^9, SS config with companions, BOS caps, speed-switched callbacks): cdc_dual_ports, cdc_msc_freertos, dfu, dfu_runtime, dynamic_configuration, hid_boot_interface, hid_composite(+freertos), hid_generic_inout, hid_multiple_interface, midi_test(+freertos), midi2_device, msc_dual_lun, mtp, printer_to_cdc, usbtmc, webusb_serial. msc_dual_lun is un-skipped for CH569 using read-only flash disks (16KB RAM can't hold two 8KB RAM disks, same as ch32v10x/v20x boards). Validation: full example sweep green for hydrausb3_v1 (SPEED=super, 19 device ELFs) and raspberry_pi_pico; wTotalLength == sizeof() verified for every SS configuration array in the built ELFs; ceedling 65/65; pre-commit clean; code-size delta +0.0% on rp2040 (SS code folds out on non-SS builds). Co-Authored-By: Claude Fable 5 Claude-Session: https://claude.ai/code/session_019MRGjBT2NBkCoWwyDT4LaE

Merge pull request #3738 from sauloverissimo/fix/midi2-fb-direction

2026-07-05T15:46:14Z

feat(midi2): derive function blocks from the GTB descriptor

ensure gtb is valid

2026-07-05T14:48:41Z

Signed-off-by: HiFiPhile

license: use SPDX identifiers for src/ headers (#3749)

2026-07-02T14:55:45Z

* license: use SPDX identifiers for src/ headers Replace the full ~20-line MIT license boilerplate on every src/ file with a two-line SPDX tag (SPDX-FileCopyrightText + SPDX-License-Identifier), following the REUSE convention used by CircuitPython and the Linux kernel. Removes ~3500 lines of duplicated boilerplate.

feat(midi2): derive function blocks from the GTB descriptor

2026-06-28T19:28:29Z

Function Block Info (direction, group span, name) is derived from the GTB descriptor as the single source of truth, so a device can expose multiple Group Terminal Blocks with independent directions. Adds Function Block Name notifications (tud_midi2_fb_name_cb) and an opt-in callback to answer UMP Stream messages from the application (tud_midi2_stream_msg_cb). Ref #3571

midi2_host: convert TX to raw FIFO mirroring midi2_device refactor

2026-05-19T19:34:42Z

midi2: convert to raw Tx FIFO for better segmentation handling, add count to packet api

2026-05-18T21:07:49Z

Signed-off-by: HiFiPhile

midi2: boundary-aware drain in xfer_cb to keep UMP packets intact

2026-05-18T14:42:34Z

midi2: drain pattern for RX FIFO

2026-05-17T22:56:04Z

Default RX/TX buffers to EPSIZE for both device and host. Document drain-in-loop on ump_read; example device callback drains until empty.

midi2: scale device buffers with EPSIZE

2026-05-17T16:07:21Z

Match midi2_host pattern. Literal 256 underran HS endpoints (512B).