tinyusb.git/src/common, branch master

Merge pull request #3757 from rhgndf/at32f403a_larger_pma

2026-07-19T20:21:53Z

Larger at32f403a PMA area

add py32f0 support

2026-07-19T11:24:40Z

dcd: route samd/rusb2/ip3511/nrf5x through iso alloc/activate

2026-07-09T16:38:15Z

Co-Authored-By: Claude Fable 5 Claude-Session: https://claude.ai/code/session_01HeF2gZ1M7GWkz6Av4BpKPg

Set larger AT32 FSDEV PMA area

2026-07-06T08:21:24Z

license: use SPDX identifiers for src/ headers (#3749)

2026-07-02T14:55:45Z

* license: use SPDX identifiers for src/ headers Replace the full ~20-line MIT license boilerplate on every src/ file with a two-line SPDX tag (SPDX-FileCopyrightText + SPDX-License-Identifier), following the REUSE convention used by CircuitPython and the Linux kernel. Removes ~3500 lines of duplicated boilerplate.

typec: add stm32u5 support

2026-06-24T19:13:27Z

Signed-off-by: HiFiPhile

hw/bsp+wch: rename the CH58x family to ch583 and OPT_MCU_CH58X to OPT_MCU_CH583

2026-06-22T08:23:08Z

The BSP family and MCU option were named "ch58x"/"CH58X", but the supported part is the CH583/CH582 (and the SDK repo is openwch/ch583); CH585 is a separate MCU family, so the CH58x umbrella was misleading. Rename to the specific family: - hw/bsp/ch58x -> hw/bsp/ch583 (dir), and the BSP-local files ch58x_it.* -> ch583_it.*, system_ch58x.* -> system_ch583.* (include guards/refs updated). The vendor SDK files (CH58x_common.h, CH58x_*.c in hw/mcu/wch/ch583) keep their names. - OPT_MCU_CH58X -> OPT_MCU_CH583 in tusb_option.h, tusb_mcu.h, and the shared WCH USBFS driver (ch32_usbfs_reg.h, dcd_ch32_usbfs.c). OPT_MCU_CH582 is kept as an alias (same value), so either name selects the same code. - FAMILY_MCUS CH58X -> CH583, CFG_TUSB_MCU=OPT_MCU_CH583, mcu:CH58X -> mcu:CH583 in the example skip lists, the CI build matrix (ci_set_matrix.py), the get_deps family tag, and docs/reference/boards.rst. Board names (ch582m_evt, yd-ch582m) are unchanged. Verified: make + cmake build for ch582m_evt, and ci.lan HIL (all device examples pass). Co-Authored-By: Claude Opus 4.8 (1M context)

dcd/ch58x: drive CH582/583 with shared dcd_ch32_usbfs.c

2026-06-18T10:59:30Z

Replace PR #3515's separate dcd_ch58x_usbfs.c / hcd_ch58x_usbfs.c with the shared WCH USBFS device driver (combined per-endpoint control, like CH32V103), adding two CH58x-specific behaviors guarded so CH32V103/V20x/V307 are unchanged: - CH32_USBFS_EP_MANUAL_TOG: CH58x's hardware AUTO_TOG does not stay in sync, so the ISR toggles DATA0/DATA1 manually and discards toggle-mismatched OUT packets. Fixes multi-packet bulk-IN (e.g. MSC READ10) that otherwise hung. - CH32_USBFS_EP4_SHARES_EP0: EP4 has no DMA register and overlays EP0's region (EP0[0:63] + EP4 OUT[64:127] + EP4 IN[128:191]); add a 192-byte shared buffer and buffer-pointer helpers (transparent for the other parts). Fixes cdc_dual_ports (Port1 is on EP4). Add the ch582m_evt board. Device only on USB0 (rhport 0): the shared hcd_ch32_usbfs.c is CH32V20x-specific and cannot drive CH58x, so host / USB2 (rhport 1) is left commented out in the BSP for easy re-add. Verified on ch582m_evt via local HIL: all device examples pass. Co-Authored-By: Claude Opus 4.8 (1M context)

Merge remote-tracking branch 'origin/master' into add-ch58x-usbfs

2026-06-18T08:31:03Z

Merge remote-tracking branch 'origin/master' into stm32c5

2026-06-11T10:20:15Z

# Conflicts: # README.rst