tinyusb.git/src/portable/chipidea/ci_hs/dcd_ci_hs.c, branch master

dcd(ci_hs): stale overlay fix; run usbtest on lpcxpresso43s67

2026-07-14T08:23:07Z

- dcd_edpt_stall flushes the primed buffer (ENDPTFLUSH), but the aborted transfer's dQH overlay can be left ACTIVE with mid-transfer state; the next prime after clear-halt then resumes the stale overlay instead of loading the fresh qtd, so post-halt IN reads return mid-buffer data (usbtest case 13 'buf[32] = 56 (not 0)', with case 18 failing downstream of the same corruption in the full battery). qhd_start_xfer now clears overlay.active alongside overlay.halted before linking the new qtd. - test/hil(hfp): drop lpcxpresso43s67's device/usbtest skip - the historical first-case wedge no longer reproduces on this branch, and with the overlay fix the board runs 30/30 on its Fresco xHCI host (previously 28/30 with deterministic case 13/18 failures). mimxrt1064_evk (imxrt dcache path) 30/30 regression-clean. - docs(hil skill): document the external hifiphile rig - pool test/hil/hfp.json, SSH-reachable from htpc/ci with no outbound SSH, exercised by the CI hil-tinyusb (hfp.json) job; never run HIL against it during development unless the user explicitly asks. Co-Authored-By: Claude Fable 5 Claude-Session: https://claude.ai/code/session_017TQZrFfU3K4Y198aLsUpBC

license: use SPDX identifiers for src/ headers (#3749)

2026-07-02T14:55:45Z

* license: use SPDX identifiers for src/ headers Replace the full ~20-line MIT license boilerplate on every src/ file with a two-line SPDX tag (SPDX-FileCopyrightText + SPDX-License-Identifier), following the REUSE convention used by CircuitPython and the Linux kernel. Removes ~3500 lines of duplicated boilerplate.

Fix ep_ctrl_mask() corrupting opposite direction's ENDPTCTRL bits

2026-03-07T20:53:01Z

ci_hs: add deinit support

2026-03-05T15:09:39Z

Signed-off-by: Zixun LI

Merge remote-tracking branch 'tinyusb/master' into support-nxp-rw612

2025-12-16T19:47:37Z

Signed-off-by: HiFiPhile

support hpmicro chips

2025-12-16T05:08:30Z

Signed-off-by: Zhihong Chen

hw/mcu: add support for NXP RW612

2025-12-10T22:04:39Z

change tu_fifo_buffer_info_t layout

2025-11-26T08:26:42Z

Merge remote-tracking branch 'tinyusb/master' into copilot/fix-dcd-edpt-xfer-issue

2025-11-19T21:05:07Z

Signed-off-by: HiFiPhile

make TUP_DCD_EDPT_ISO_ALLOC i.e dcd_edpt_iso_alloc()/dcd_edpt_iso_activate() as default driver implementation. dcd_edpt_close() is deprecated and will be removed from all driver in the future.

2025-11-17T05:09:30Z