tinyusb.git/src/portable/wch/dcd_ch32_usbhs.c, branch worktree-ch569-hydrausb3

Merge remote-tracking branch 'origin/master' into usbtest

2026-07-06T09:17:17Z

# Conflicts: # lib/rt-thread/port/msc_device_port.c # src/device/usbd.c

usbtest: support CH32V307 on both USB ports (usbfs + usbhs), 30/30 each

2026-07-06T08:32:17Z

The CH32V307 exposes two device controllers: the full-speed USBFS (dcd_ch32_usbfs, selected with -DSPEED=full) and the high-speed USBHS (dcd_ch32_usbhs, the default). Both now pass the Linux testusb tier-4 battery 30/30 (3 reflash cycles each) on ch32v307v_r1_1v0. - dcd(ch32_usbhs): fix clear-stall on an armed OUT endpoint. It set the pipe to NAK unconditionally, so a receive the class still considers submitted NAKed forever after CLEAR_FEATURE(HALT) and usbtest toggle test 29 timed out. Re-queue the pending receive (ACK/NYET) instead. This is the first usbtest coverage of the ch32_usbhs driver. - bsp(ch32v30x): implement board_get_unique_id from the ESIG UID (0x1FFFF7E8); the port previously fell back to the placeholder serial. - usbtest: the CH32V307 usbfs port caps iso at 64 B like the other WCH USBFS parts, so add it to the FS iso-64 descriptor branch (its usbhs port uses the HS sizes). - test/hil: register ch32v307v_r1_1v0 (usbhs + usbfs variants, WCH-Link BC5DA47360D0) and move nrf54lm20dk to boards-skip. Co-Authored-By: Claude Opus 4.8 Claude-Session: https://claude.ai/code/session_01HeF2gZ1M7GWkz6Av4BpKPg

license: use SPDX identifiers for src/ headers (#3749)

2026-07-02T14:55:45Z

* license: use SPDX identifiers for src/ headers Replace the full ~20-line MIT license boilerplate on every src/ file with a two-line SPDX tag (SPDX-FileCopyrightText + SPDX-License-Identifier), following the REUSE convention used by CircuitPython and the Linux kernel. Removes ~3500 lines of duplicated boilerplate.

ch32_usbhs: fix endpoint stall length index and clear-stall response

2026-05-26T13:00:31Z

Fix issue in the stall handling: - dcd_edpt_stall() for an IN endpoint cleared EP_TX_LEN(0) instead of EP_TX_LEN(ep_num), clobbering endpoint 0's transmit length register when stalling any other IN endpoint. Co-Authored-By: Claude Opus 4.7 (1M context)

dcd/ch32x: optmize CTRL reg writing, basically revert e14b0e85

2026-05-23T18:06:50Z

Signed-off-by: HiFiPhile

dcd/ch32hs: refactor transfer flow

2026-05-23T17:37:47Z

Refactor the driver to follow USBFS style for easier maintenance. Replace the old packet/response helpers with explicit queue and update paths for IN and OUT transfers. Introduce transfer validity tracking and per-endpoint data toggle state. Reset toggle state on init, close-all, endpoint close, clear-stall, and bus reset. Initialize endpoint controls consistently in NAK + TOG_0 mode. Tighten EP0 setup/status handling and route transfer IRQ processing through the transfer-flag path. Stop enabling ISO_ACT in INT_EN and clear unhandled interrupt flags explicitly. Signed-off-by: HiFiPhile

dcd/ch32x : code reformat

2026-05-23T11:10:47Z

Signed-off-by: HiFiPhile

Merge remote-tracking branch 'tinyusb/master' into copilot/fix-dcd-edpt-xfer-issue

2025-11-19T21:05:07Z

Signed-off-by: HiFiPhile

make TUP_DCD_EDPT_ISO_ALLOC i.e dcd_edpt_iso_alloc()/dcd_edpt_iso_activate() as default driver implementation. dcd_edpt_close() is deprecated and will be removed from all driver in the future.

2025-11-17T05:09:30Z

Apply suggestions from code review

2025-10-22T19:08:09Z

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>