adding stm32f3 support

15 files changed, 6559 insertions, 0 deletions

diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f301x8.s b/hw/mcu/st/startup/stm32f3/startup_stm32f301x8.s
new file mode 100644
index 000000000..a8d036390
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f301x8.s
@@ -0,0 +1,403 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f301x8.s
+  * @author    MCD Application Team
+  * @brief     STM32F301x6/STM32F301x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	0
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	0
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	0
+	.word	0
+	.word	TIM6_DAC_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	I2C3_EV_IRQHandler
+	.word	I2C3_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_IRQHandler
+	.thumb_set ADC1_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	COMP2_IRQHandler
+	.thumb_set COMP2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+	
+	.weak	I2C3_EV_IRQHandler
+	.thumb_set I2C3_EV_IRQHandler,Default_Handler
+    
+	.weak	I2C3_ER_IRQHandler
+	.thumb_set I2C3_ER_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f302x8.s b/hw/mcu/st/startup/stm32f3/startup_stm32f302x8.s
new file mode 100644
index 000000000..590f380a1
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f302x8.s
@@ -0,0 +1,427 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f302x8.s
+  * @author    MCD Application Team
+  * @brief     STM32F302x6/STM32F302x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	USB_HP_CAN_TX_IRQHandler
+	.word	USB_LP_CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	0
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	0
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	0
+	.word	0
+	.word	TIM6_DAC_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	I2C3_EV_IRQHandler
+	.word	I2C3_ER_IRQHandler
+	.word	USB_HP_IRQHandler
+	.word	USB_LP_IRQHandler
+	.word	USBWakeUp_RMP_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_IRQHandler
+	.thumb_set ADC1_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN_TX_IRQHandler
+	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN_RX0_IRQHandler
+	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+	
+	.weak	COMP2_IRQHandler
+	.thumb_set COMP2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+  
+	.weak	I2C3_EV_IRQHandler
+	.thumb_set I2C3_EV_IRQHandler,Default_Handler  
+	
+	.weak	I2C3_ER_IRQHandler
+	.thumb_set I2C3_ER_IRQHandler,Default_Handler	
+	
+	.weak	USB_HP_IRQHandler
+	.thumb_set USB_HP_IRQHandler,Default_Handler
+	
+	.weak	USB_LP_IRQHandler
+	.thumb_set USB_LP_IRQHandler,Default_Handler
+	
+	.weak	USBWakeUp_RMP_IRQHandler
+	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f302xc.s b/hw/mcu/st/startup/stm32f3/startup_stm32f302xc.s
new file mode 100644
index 000000000..4c32f1f8c
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f302xc.s
@@ -0,0 +1,451 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f302xc.s
+  * @author    MCD Application Team
+  * @brief     STM32F302xB/STM32F302xC devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN_TX_IRQHandler
+	.word	USB_LP_CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	UART4_IRQHandler
+	.word	UART5_IRQHandler
+	.word	TIM6_DAC_IRQHandler
+	.word	0
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP1_2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	USB_HP_IRQHandler
+	.word	USB_LP_IRQHandler
+	.word	USBWakeUp_RMP_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN_TX_IRQHandler
+	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN_RX0_IRQHandler
+	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+	
+	.weak	COMP1_2_IRQHandler
+	.thumb_set COMP1_2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+	
+	.weak	USB_HP_IRQHandler
+	.thumb_set USB_HP_IRQHandler,Default_Handler
+	
+	.weak	USB_LP_IRQHandler
+	.thumb_set USB_LP_IRQHandler,Default_Handler
+	
+	.weak	USBWakeUp_RMP_IRQHandler
+	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f302xe.s b/hw/mcu/st/startup/stm32f3/startup_stm32f302xe.s
new file mode 100644
index 000000000..4723b72a0
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f302xe.s
@@ -0,0 +1,478 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f302xe.s
+  * @author    MCD Application Team
+  * @brief     STM32F302xE devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN_TX_IRQHandler
+	.word	USB_LP_CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FMC_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	UART4_IRQHandler
+	.word	UART5_IRQHandler
+	.word	TIM6_DAC_IRQHandler
+	.word	0
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP1_2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	I2C3_EV_IRQHandler
+	.word	I2C3_ER_IRQHandler
+	.word	USB_HP_IRQHandler
+	.word	USB_LP_IRQHandler
+	.word	USBWakeUp_RMP_IRQHandler
+	.word	TIM20_BRK_IRQHandler
+	.word	TIM20_UP_IRQHandler
+	.word	TIM20_TRG_COM_IRQHandler
+	.word	TIM20_CC_IRQHandler
+	.word	FPU_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI4_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN_TX_IRQHandler
+	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN_RX0_IRQHandler
+	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	FMC_IRQHandler
+	.thumb_set FMC_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	COMP1_2_IRQHandler
+	.thumb_set COMP1_2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+	
+	.weak	I2C3_EV_IRQHandler
+	.thumb_set I2C3_EV_IRQHandler,Default_Handler	
+	
+	.weak	I2C3_ER_IRQHandler
+	.thumb_set I2C3_ER_IRQHandler,Default_Handler	
+	
+	.weak	USB_HP_IRQHandler
+	.thumb_set USB_HP_IRQHandler,Default_Handler
+	
+	.weak	USB_LP_IRQHandler
+	.thumb_set USB_LP_IRQHandler,Default_Handler
+	
+	.weak	USBWakeUp_RMP_IRQHandler
+	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+	
+	.weak	TIM20_BRK_IRQHandler
+	.thumb_set TIM20_BRK_IRQHandler,Default_Handler
+	
+	.weak	TIM20_UP_IRQHandler
+	.thumb_set TIM20_UP_IRQHandler,Default_Handler
+	
+	.weak	TIM20_TRG_COM_IRQHandler
+	.thumb_set TIM20_TRG_COM_IRQHandler,Default_Handler
+	
+	.weak	TIM20_CC_IRQHandler
+	.thumb_set TIM20_CC_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+	
+	.weak	SPI4_IRQHandler
+	.thumb_set SPI4_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f303x8.s b/hw/mcu/st/startup/stm32f3/startup_stm32f303x8.s
new file mode 100644
index 000000000..097ce56a1
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f303x8.s
@@ -0,0 +1,406 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f303x8.s
+  * @author    MCD Application Team
+  * @brief     STM32F303x6/STM32F303x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	CAN_TX_IRQHandler
+	.word	CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI1_IRQHandler
+	.word	0
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	TIM6_DAC1_IRQHandler
+	.word	TIM7_DAC2_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	CAN_TX_IRQHandler
+	.thumb_set CAN_TX_IRQHandler,Default_Handler
+
+	.weak	CAN_RX0_IRQHandler
+	.thumb_set CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC1_IRQHandler
+	.thumb_set TIM6_DAC1_IRQHandler,Default_Handler
+
+	.weak	TIM7_DAC2_IRQHandler
+	.thumb_set TIM7_DAC2_IRQHandler,Default_Handler
+	
+	.weak	COMP2_IRQHandler
+	.thumb_set COMP2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f303xc.s b/hw/mcu/st/startup/stm32f3/startup_stm32f303xc.s
new file mode 100644
index 000000000..9e6c3b705
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f303xc.s
@@ -0,0 +1,475 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f303xc.s
+  * @author    MCD Application Team
+  * @brief     STM32F303xB/STM32F303xC devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN_TX_IRQHandler
+	.word	USB_LP_CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	TIM8_BRK_IRQHandler
+	.word	TIM8_UP_IRQHandler
+	.word	TIM8_TRG_COM_IRQHandler
+	.word	TIM8_CC_IRQHandler
+	.word	ADC3_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	UART4_IRQHandler
+	.word	UART5_IRQHandler
+	.word	TIM6_DAC_IRQHandler
+	.word	TIM7_IRQHandler
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	ADC4_IRQHandler
+	.word	0
+	.word	0
+	.word	COMP1_2_3_IRQHandler
+	.word	COMP4_5_6_IRQHandler
+	.word	COMP7_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	USB_HP_IRQHandler
+	.word	USB_LP_IRQHandler
+	.word	USBWakeUp_RMP_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN_TX_IRQHandler
+	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN_RX0_IRQHandler
+	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	TIM8_BRK_IRQHandler
+	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM8_UP_IRQHandler
+	.thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+	.weak	TIM8_TRG_COM_IRQHandler
+	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM8_CC_IRQHandler
+	.thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+	.weak	ADC3_IRQHandler
+	.thumb_set ADC3_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	ADC4_IRQHandler
+	.thumb_set ADC4_IRQHandler,Default_Handler	
+	
+	.weak	COMP1_2_3_IRQHandler
+	.thumb_set COMP1_2_3_IRQHandler,Default_Handler
+	
+	.weak	COMP4_5_6_IRQHandler
+	.thumb_set COMP4_5_6_IRQHandler,Default_Handler
+	
+	.weak	COMP7_IRQHandler
+	.thumb_set COMP7_IRQHandler,Default_Handler	
+	
+	.weak	USB_HP_IRQHandler
+	.thumb_set USB_HP_IRQHandler,Default_Handler
+	
+	.weak	USB_LP_IRQHandler
+	.thumb_set USB_LP_IRQHandler,Default_Handler
+	
+	.weak	USBWakeUp_RMP_IRQHandler
+	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f303xe.s b/hw/mcu/st/startup/stm32f3/startup_stm32f303xe.s
new file mode 100644
index 000000000..b151e2f76
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f303xe.s
@@ -0,0 +1,502 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f303xe.s
+  * @author    MCD Application Team
+  * @brief     STM32F303xE devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	USB_HP_CAN_TX_IRQHandler
+	.word	USB_LP_CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	TIM8_BRK_IRQHandler
+	.word	TIM8_UP_IRQHandler
+	.word	TIM8_TRG_COM_IRQHandler
+	.word	TIM8_CC_IRQHandler
+	.word	ADC3_IRQHandler
+	.word	FMC_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	UART4_IRQHandler
+	.word	UART5_IRQHandler
+	.word	TIM6_DAC_IRQHandler
+	.word	TIM7_IRQHandler
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	ADC4_IRQHandler
+	.word	0
+	.word	0
+	.word	COMP1_2_3_IRQHandler
+	.word	COMP4_5_6_IRQHandler
+	.word	COMP7_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	I2C3_EV_IRQHandler
+	.word	I2C3_ER_IRQHandler
+	.word	USB_HP_IRQHandler
+	.word	USB_LP_IRQHandler
+	.word	USBWakeUp_RMP_IRQHandler
+	.word	TIM20_BRK_IRQHandler
+	.word	TIM20_UP_IRQHandler
+	.word	TIM20_TRG_COM_IRQHandler
+	.word	TIM20_CC_IRQHandler
+	.word	FPU_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI4_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	USB_HP_CAN_TX_IRQHandler
+	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+	.weak	USB_LP_CAN_RX0_IRQHandler
+	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	TIM8_BRK_IRQHandler
+	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM8_UP_IRQHandler
+	.thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+	.weak	TIM8_TRG_COM_IRQHandler
+	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM8_CC_IRQHandler
+	.thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+	.weak	ADC3_IRQHandler
+	.thumb_set ADC3_IRQHandler,Default_Handler
+
+	.weak	FMC_IRQHandler
+	.thumb_set FMC_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	ADC4_IRQHandler
+	.thumb_set ADC4_IRQHandler,Default_Handler	
+	
+	.weak	COMP1_2_3_IRQHandler
+	.thumb_set COMP1_2_3_IRQHandler,Default_Handler
+	
+	.weak	COMP4_5_6_IRQHandler
+	.thumb_set COMP4_5_6_IRQHandler,Default_Handler
+	
+	.weak	COMP7_IRQHandler
+	.thumb_set COMP7_IRQHandler,Default_Handler	
+	
+	.weak	I2C3_EV_IRQHandler
+	.thumb_set I2C3_EV_IRQHandler,Default_Handler	
+	
+	.weak	I2C3_ER_IRQHandler
+	.thumb_set I2C3_ER_IRQHandler,Default_Handler	
+	
+	.weak	USB_HP_IRQHandler
+	.thumb_set USB_HP_IRQHandler,Default_Handler
+	
+	.weak	USB_LP_IRQHandler
+	.thumb_set USB_LP_IRQHandler,Default_Handler
+	
+	.weak	USBWakeUp_RMP_IRQHandler
+	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+	
+	.weak	TIM20_BRK_IRQHandler
+	.thumb_set TIM20_BRK_IRQHandler,Default_Handler
+	
+	.weak	TIM20_UP_IRQHandler
+	.thumb_set TIM20_UP_IRQHandler,Default_Handler
+	
+	.weak	TIM20_TRG_COM_IRQHandler
+	.thumb_set TIM20_TRG_COM_IRQHandler,Default_Handler
+	
+	.weak	TIM20_CC_IRQHandler
+	.thumb_set TIM20_CC_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+	
+	.weak	SPI4_IRQHandler
+	.thumb_set SPI4_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f318xx.s b/hw/mcu/st/startup/stm32f3/startup_stm32f318xx.s
new file mode 100644
index 000000000..c78c31280
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f318xx.s
@@ -0,0 +1,400 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f318xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F318xx device vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	0
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	0
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	0
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	0
+	.word	0
+	.word	TIM6_DAC_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	I2C3_EV_IRQHandler
+	.word	I2C3_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_IRQHandler
+	.thumb_set ADC1_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	COMP2_IRQHandler
+	.thumb_set COMP2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+	
+	.weak	I2C3_EV_IRQHandler
+	.thumb_set I2C3_EV_IRQHandler,Default_Handler
+    
+	.weak	I2C3_ER_IRQHandler
+	.thumb_set I2C3_ER_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f328xx.s b/hw/mcu/st/startup/stm32f3/startup_stm32f328xx.s
new file mode 100644
index 000000000..7ffda9cad
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f328xx.s
@@ -0,0 +1,403 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f328xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F328xx device vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	0
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	CAN_TX_IRQHandler
+	.word	CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI1_IRQHandler
+	.word	0
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	TIM6_DAC1_IRQHandler
+	.word	TIM7_DAC2_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	CAN_TX_IRQHandler
+	.thumb_set CAN_TX_IRQHandler,Default_Handler
+
+	.weak	CAN_RX0_IRQHandler
+	.thumb_set CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC1_IRQHandler
+	.thumb_set TIM6_DAC1_IRQHandler,Default_Handler
+
+	.weak	TIM7_DAC2_IRQHandler
+	.thumb_set TIM7_DAC2_IRQHandler,Default_Handler
+	
+	.weak	COMP2_IRQHandler
+	.thumb_set COMP2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+		
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f334x8.s b/hw/mcu/st/startup/stm32f3/startup_stm32f334x8.s
new file mode 100644
index 000000000..1203f43d6
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f334x8.s
@@ -0,0 +1,427 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f334x8.s
+  * @author    MCD Application Team
+  * @brief     STM32F334x4/STM32F334x6/STM32F334x8 devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	CAN_TX_IRQHandler
+	.word	CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	0
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI1_IRQHandler
+	.word	0
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	TIM6_DAC1_IRQHandler
+	.word	TIM7_DAC2_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	COMP2_IRQHandler
+	.word	COMP4_6_IRQHandler
+	.word	0
+	.word	HRTIM1_Master_IRQHandler
+	.word	HRTIM1_TIMA_IRQHandler
+	.word	HRTIM1_TIMB_IRQHandler
+	.word	HRTIM1_TIMC_IRQHandler
+	.word	HRTIM1_TIMD_IRQHandler
+	.word	HRTIM1_TIME_IRQHandler
+	.word	HRTIM1_FLT_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	CAN_TX_IRQHandler
+	.thumb_set CAN_TX_IRQHandler,Default_Handler
+
+	.weak	CAN_RX0_IRQHandler
+	.thumb_set CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC1_IRQHandler
+	.thumb_set TIM6_DAC1_IRQHandler,Default_Handler
+
+	.weak	TIM7_DAC2_IRQHandler
+	.thumb_set TIM7_DAC2_IRQHandler,Default_Handler
+	
+	.weak	COMP2_IRQHandler
+	.thumb_set COMP2_IRQHandler,Default_Handler
+	
+	.weak	COMP4_6_IRQHandler
+	.thumb_set COMP4_6_IRQHandler,Default_Handler
+	
+	.weak	HRTIM1_Master_IRQHandler
+	.thumb_set HRTIM1_Master_IRQHandler,Default_Handler
+	
+	.weak	HRTIM1_TIMA_IRQHandler
+	.thumb_set HRTIM1_TIMA_IRQHandler,Default_Handler
+	
+	.weak	HRTIM1_TIMB_IRQHandler
+	.thumb_set HRTIM1_TIMB_IRQHandler,Default_Handler  
+  
+	.weak	HRTIM1_TIMC_IRQHandler
+	.thumb_set HRTIM1_TIMC_IRQHandler,Default_Handler	
+	
+	.weak	HRTIM1_TIMD_IRQHandler
+	.thumb_set HRTIM1_TIMD_IRQHandler,Default_Handler
+	
+	.weak	HRTIM1_TIME_IRQHandler
+	.thumb_set HRTIM1_TIME_IRQHandler,Default_Handler
+	
+	.weak	HRTIM1_FLT_IRQHandler
+	.thumb_set HRTIM1_FLT_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f358xx.s b/hw/mcu/st/startup/stm32f3/startup_stm32f358xx.s
new file mode 100644
index 000000000..ea5d9b8cb
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f358xx.s
@@ -0,0 +1,460 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f358xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F358xx device vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	0
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	CAN_TX_IRQHandler
+	.word	CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	0
+	.word	TIM8_BRK_IRQHandler
+	.word	TIM8_UP_IRQHandler
+	.word	TIM8_TRG_COM_IRQHandler
+	.word	TIM8_CC_IRQHandler
+	.word	ADC3_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	UART4_IRQHandler
+	.word	UART5_IRQHandler
+	.word	TIM6_DAC_IRQHandler
+	.word	TIM7_IRQHandler
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	ADC4_IRQHandler
+	.word	0
+	.word	0
+	.word	COMP1_2_3_IRQHandler
+	.word	COMP4_5_6_IRQHandler
+	.word	COMP7_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	CAN_TX_IRQHandler
+	.thumb_set CAN_TX_IRQHandler,Default_Handler
+
+	.weak	CAN_RX0_IRQHandler
+	.thumb_set CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	TIM8_BRK_IRQHandler
+	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM8_UP_IRQHandler
+	.thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+	.weak	TIM8_TRG_COM_IRQHandler
+	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM8_CC_IRQHandler
+	.thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+	.weak	ADC3_IRQHandler
+	.thumb_set ADC3_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	ADC4_IRQHandler
+	.thumb_set ADC4_IRQHandler,Default_Handler	
+	
+	.weak	COMP1_2_3_IRQHandler
+	.thumb_set COMP1_2_3_IRQHandler,Default_Handler
+	
+	.weak	COMP4_5_6_IRQHandler
+	.thumb_set COMP4_5_6_IRQHandler,Default_Handler
+	
+	.weak	COMP7_IRQHandler
+	.thumb_set COMP7_IRQHandler,Default_Handler	
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f373xc.s b/hw/mcu/st/startup/stm32f3/startup_stm32f373xc.s
new file mode 100644
index 000000000..4994c56ae
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f373xc.s
@@ -0,0 +1,469 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f373xc.s
+  * @author    MCD Application Team
+  * @brief     STM32F373xB/STM32F373xC devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	PVD_IRQHandler
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	CAN_TX_IRQHandler
+	.word	CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM15_IRQHandler
+	.word	TIM16_IRQHandler
+	.word	TIM17_IRQHandler
+	.word	TIM18_DAC2_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	CEC_IRQHandler
+	.word	TIM12_IRQHandler
+	.word	TIM13_IRQHandler
+	.word	TIM14_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	TIM5_IRQHandler
+	.word	SPI3_IRQHandler
+	.word	0
+	.word	0
+	.word	TIM6_DAC1_IRQHandler
+	.word	TIM7_IRQHandler
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	SDADC1_IRQHandler
+	.word	SDADC2_IRQHandler
+	.word	SDADC3_IRQHandler
+	.word	COMP1_2_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	USB_HP_IRQHandler
+	.word	USB_LP_IRQHandler
+	.word	USBWakeUp_IRQHandler
+	.word	0
+	.word	TIM19_IRQHandler
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	PVD_IRQHandler
+	.thumb_set PVD_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_IRQHandler
+	.thumb_set ADC1_IRQHandler,Default_Handler
+
+	.weak	CAN_TX_IRQHandler
+	.thumb_set CAN_TX_IRQHandler,Default_Handler
+
+	.weak	CAN_RX0_IRQHandler
+	.thumb_set CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM15_IRQHandler
+	.thumb_set TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM16_IRQHandler
+	.thumb_set TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM17_IRQHandler
+	.thumb_set TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM18_DAC2_IRQHandler
+	.thumb_set TIM18_DAC2_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	CEC_IRQHandler
+	.thumb_set CEC_IRQHandler,Default_Handler
+
+	.weak	TIM12_IRQHandler
+	.thumb_set TIM12_IRQHandler,Default_Handler
+
+	.weak	TIM13_IRQHandler
+	.thumb_set TIM13_IRQHandler,Default_Handler
+
+	.weak	TIM14_IRQHandler
+	.thumb_set TIM14_IRQHandler,Default_Handler
+
+	.weak	TIM5_IRQHandler
+	.thumb_set TIM5_IRQHandler,Default_Handler
+	
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC1_IRQHandler
+	.thumb_set TIM6_DAC1_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	SDADC1_IRQHandler
+	.thumb_set SDADC1_IRQHandler,Default_Handler	
+
+	.weak	SDADC2_IRQHandler
+	.thumb_set SDADC2_IRQHandler,Default_Handler	
+
+	.weak	SDADC3_IRQHandler
+	.thumb_set SDADC3_IRQHandler,Default_Handler	
+
+	.weak	COMP1_2_IRQHandler
+	.thumb_set COMP1_2_IRQHandler,Default_Handler	
+		
+	.weak	USB_HP_IRQHandler
+	.thumb_set USB_HP_IRQHandler,Default_Handler
+	
+	.weak	USB_LP_IRQHandler
+	.thumb_set USB_LP_IRQHandler,Default_Handler
+	
+	.weak	USBWakeUp_IRQHandler
+	.thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+	.weak	TIM19_IRQHandler
+	.thumb_set TIM19_IRQHandler,Default_Handler
+  	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f378xx.s b/hw/mcu/st/startup/stm32f3/startup_stm32f378xx.s
new file mode 100644
index 000000000..7f683a369
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f378xx.s
@@ -0,0 +1,457 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f378xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F378xx device vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	0
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_IRQHandler
+	.word	CAN_TX_IRQHandler
+	.word	CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM15_IRQHandler
+	.word	TIM16_IRQHandler
+	.word	TIM17_IRQHandler
+	.word	TIM18_DAC2_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	CEC_IRQHandler
+	.word	TIM12_IRQHandler
+	.word	TIM13_IRQHandler
+	.word	TIM14_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	TIM5_IRQHandler
+	.word	SPI3_IRQHandler
+	.word	0
+	.word	0
+	.word	TIM6_DAC1_IRQHandler
+	.word	TIM7_IRQHandler
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	SDADC1_IRQHandler
+	.word	SDADC2_IRQHandler
+	.word	SDADC3_IRQHandler
+	.word	COMP1_2_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	TIM19_IRQHandler
+	.word	0
+	.word	0
+	.word	FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_IRQHandler
+	.thumb_set ADC1_IRQHandler,Default_Handler
+
+	.weak	CAN_TX_IRQHandler
+	.thumb_set CAN_TX_IRQHandler,Default_Handler
+
+	.weak	CAN_RX0_IRQHandler
+	.thumb_set CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM15_IRQHandler
+	.thumb_set TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM16_IRQHandler
+	.thumb_set TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM17_IRQHandler
+	.thumb_set TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM18_DAC2_IRQHandler
+	.thumb_set TIM18_DAC2_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	CEC_IRQHandler
+	.thumb_set CEC_IRQHandler,Default_Handler
+
+	.weak	TIM12_IRQHandler
+	.thumb_set TIM12_IRQHandler,Default_Handler
+
+	.weak	TIM13_IRQHandler
+	.thumb_set TIM13_IRQHandler,Default_Handler
+
+	.weak	TIM14_IRQHandler
+	.thumb_set TIM14_IRQHandler,Default_Handler
+
+	.weak	TIM5_IRQHandler
+	.thumb_set TIM5_IRQHandler,Default_Handler
+	
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC1_IRQHandler
+	.thumb_set TIM6_DAC1_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	SDADC1_IRQHandler
+	.thumb_set SDADC1_IRQHandler,Default_Handler	
+
+	.weak	SDADC2_IRQHandler
+	.thumb_set SDADC2_IRQHandler,Default_Handler	
+
+	.weak	SDADC3_IRQHandler
+	.thumb_set SDADC3_IRQHandler,Default_Handler	
+
+	.weak	COMP1_2_IRQHandler
+	.thumb_set COMP1_2_IRQHandler,Default_Handler	
+
+	.weak	TIM19_IRQHandler
+	.thumb_set TIM19_IRQHandler,Default_Handler
+  	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/startup/stm32f3/startup_stm32f398xx.s b/hw/mcu/st/startup/stm32f3/startup_stm32f398xx.s
new file mode 100644
index 000000000..2d076acdb
--- /dev/null
+++ b/hw/mcu/st/startup/stm32f3/startup_stm32f398xx.s
@@ -0,0 +1,487 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f398xx.s
+  * @author    MCD Application Team
+  * @brief     STM32F398xx devices vector table for GCC toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address,
+  *                - Configure the clock system  
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+	.cpu cortex-m4
+	.fpu softvfp
+	.thumb
+
+.global	g_pfnVectors
+.global	Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word	_sidata
+/* start address for the .data section. defined in linker script */
+.word	_sdata
+/* end address for the .data section. defined in linker script */
+.word	_edata
+/* start address for the .bss section. defined in linker script */
+.word	_sbss
+/* end address for the .bss section. defined in linker script */
+.word	_ebss
+
+.equ  BootRAM,        0xF1E0F85F
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section	.text.Reset_Handler
+	.weak	Reset_Handler
+	.type	Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack    /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs	r1, #0
+  b	LoopCopyDataInit
+
+CopyDataInit:
+	ldr	r3, =_sidata
+	ldr	r3, [r3, r1]
+	str	r3, [r0, r1]
+	adds	r1, r1, #4
+
+LoopCopyDataInit:
+	ldr	r0, =_sdata
+	ldr	r3, =_edata
+	adds	r2, r0, r1
+	cmp	r2, r3
+	bcc	CopyDataInit
+	ldr	r2, =_sbss
+	b	LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+	movs	r3, #0
+	str	r3, [r2], #4
+
+LoopFillZerobss:
+	ldr	r3, = _ebss
+	cmp	r2, r3
+	bcc	FillZerobss
+
+/* Call the clock system intitialization function.*/
+    bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+	bl	main
+
+LoopForever:
+    b LoopForever
+    
+.size	Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section	.text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+	b	Infinite_Loop
+	.size	Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ 	.section	.isr_vector,"a",%progbits
+	.type	g_pfnVectors, %object
+	.size	g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+	.word	_estack
+	.word	Reset_Handler
+	.word	NMI_Handler
+	.word	HardFault_Handler
+	.word	MemManage_Handler
+	.word	BusFault_Handler
+	.word	UsageFault_Handler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	SVC_Handler
+	.word	DebugMon_Handler
+	.word	0
+	.word	PendSV_Handler
+	.word	SysTick_Handler
+	.word	WWDG_IRQHandler
+	.word	0
+	.word	TAMP_STAMP_IRQHandler
+	.word	RTC_WKUP_IRQHandler
+	.word	FLASH_IRQHandler
+	.word	RCC_IRQHandler
+	.word	EXTI0_IRQHandler
+	.word	EXTI1_IRQHandler
+	.word	EXTI2_TSC_IRQHandler
+	.word	EXTI3_IRQHandler
+	.word	EXTI4_IRQHandler
+	.word	DMA1_Channel1_IRQHandler
+	.word	DMA1_Channel2_IRQHandler
+	.word	DMA1_Channel3_IRQHandler
+	.word	DMA1_Channel4_IRQHandler
+	.word	DMA1_Channel5_IRQHandler
+	.word	DMA1_Channel6_IRQHandler
+	.word	DMA1_Channel7_IRQHandler
+	.word	ADC1_2_IRQHandler
+	.word	CAN_TX_IRQHandler
+	.word	CAN_RX0_IRQHandler
+	.word	CAN_RX1_IRQHandler
+	.word	CAN_SCE_IRQHandler
+	.word	EXTI9_5_IRQHandler
+	.word	TIM1_BRK_TIM15_IRQHandler
+	.word	TIM1_UP_TIM16_IRQHandler
+	.word	TIM1_TRG_COM_TIM17_IRQHandler
+	.word	TIM1_CC_IRQHandler
+	.word	TIM2_IRQHandler
+	.word	TIM3_IRQHandler
+	.word	TIM4_IRQHandler
+	.word	I2C1_EV_IRQHandler
+	.word	I2C1_ER_IRQHandler
+	.word	I2C2_EV_IRQHandler
+	.word	I2C2_ER_IRQHandler
+	.word	SPI1_IRQHandler
+	.word	SPI2_IRQHandler
+	.word	USART1_IRQHandler
+	.word	USART2_IRQHandler
+	.word	USART3_IRQHandler
+	.word	EXTI15_10_IRQHandler
+	.word	RTC_Alarm_IRQHandler
+	.word	0
+	.word	TIM8_BRK_IRQHandler
+	.word	TIM8_UP_IRQHandler
+	.word	TIM8_TRG_COM_IRQHandler
+	.word	TIM8_CC_IRQHandler
+	.word	ADC3_IRQHandler
+	.word	FMC_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI3_IRQHandler
+	.word	UART4_IRQHandler
+	.word	UART5_IRQHandler
+	.word	TIM6_DAC_IRQHandler
+	.word	TIM7_IRQHandler
+	.word	DMA2_Channel1_IRQHandler
+	.word	DMA2_Channel2_IRQHandler
+	.word	DMA2_Channel3_IRQHandler
+	.word	DMA2_Channel4_IRQHandler
+	.word	DMA2_Channel5_IRQHandler
+	.word	ADC4_IRQHandler
+	.word	0
+	.word	0
+	.word	COMP1_2_3_IRQHandler
+	.word	COMP4_5_6_IRQHandler
+	.word	COMP7_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	0
+	.word	I2C3_EV_IRQHandler
+	.word	I2C3_ER_IRQHandler
+	.word	0
+	.word	0
+	.word	0
+	.word	TIM20_BRK_IRQHandler
+	.word	TIM20_UP_IRQHandler
+	.word	TIM20_TRG_COM_IRQHandler
+	.word	TIM20_CC_IRQHandler
+	.word	FPU_IRQHandler
+	.word	0
+	.word	0
+	.word	SPI4_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+  .weak	NMI_Handler
+	.thumb_set NMI_Handler,Default_Handler
+
+  .weak	HardFault_Handler
+	.thumb_set HardFault_Handler,Default_Handler
+
+  .weak	MemManage_Handler
+	.thumb_set MemManage_Handler,Default_Handler
+
+  .weak	BusFault_Handler
+	.thumb_set BusFault_Handler,Default_Handler
+
+	.weak	UsageFault_Handler
+	.thumb_set UsageFault_Handler,Default_Handler
+
+	.weak	SVC_Handler
+	.thumb_set SVC_Handler,Default_Handler
+
+	.weak	DebugMon_Handler
+	.thumb_set DebugMon_Handler,Default_Handler
+
+	.weak	PendSV_Handler
+	.thumb_set PendSV_Handler,Default_Handler
+
+	.weak	SysTick_Handler
+	.thumb_set SysTick_Handler,Default_Handler
+
+	.weak	WWDG_IRQHandler
+	.thumb_set WWDG_IRQHandler,Default_Handler
+
+	.weak	TAMP_STAMP_IRQHandler
+	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+	.weak	RTC_WKUP_IRQHandler
+	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+	.weak	FLASH_IRQHandler
+	.thumb_set FLASH_IRQHandler,Default_Handler
+
+	.weak	RCC_IRQHandler
+	.thumb_set RCC_IRQHandler,Default_Handler
+
+	.weak	EXTI0_IRQHandler
+	.thumb_set EXTI0_IRQHandler,Default_Handler
+
+	.weak	EXTI1_IRQHandler
+	.thumb_set EXTI1_IRQHandler,Default_Handler
+
+	.weak	EXTI2_TSC_IRQHandler
+	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+	.weak	EXTI3_IRQHandler
+	.thumb_set EXTI3_IRQHandler,Default_Handler
+
+	.weak	EXTI4_IRQHandler
+	.thumb_set EXTI4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel1_IRQHandler
+	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel2_IRQHandler
+	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel3_IRQHandler
+	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel4_IRQHandler
+	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel5_IRQHandler
+	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel6_IRQHandler
+	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+	.weak	DMA1_Channel7_IRQHandler
+	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+	.weak	ADC1_2_IRQHandler
+	.thumb_set ADC1_2_IRQHandler,Default_Handler
+
+	.weak	CAN_TX_IRQHandler
+	.thumb_set CAN_TX_IRQHandler,Default_Handler
+
+	.weak	CAN_RX0_IRQHandler
+	.thumb_set CAN_RX0_IRQHandler,Default_Handler
+
+	.weak	CAN_RX1_IRQHandler
+	.thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+	.weak	CAN_SCE_IRQHandler
+	.thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+	.weak	EXTI9_5_IRQHandler
+	.thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+	.weak	TIM1_BRK_TIM15_IRQHandler
+	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+	.weak	TIM1_UP_TIM16_IRQHandler
+	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+	.weak	TIM1_TRG_COM_TIM17_IRQHandler
+	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+	.weak	TIM1_CC_IRQHandler
+	.thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+	.weak	TIM2_IRQHandler
+	.thumb_set TIM2_IRQHandler,Default_Handler
+
+	.weak	TIM3_IRQHandler
+	.thumb_set TIM3_IRQHandler,Default_Handler
+
+	.weak	TIM4_IRQHandler
+	.thumb_set TIM4_IRQHandler,Default_Handler
+
+	.weak	I2C1_EV_IRQHandler
+	.thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+	.weak	I2C1_ER_IRQHandler
+	.thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+	.weak	I2C2_EV_IRQHandler
+	.thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+	.weak	I2C2_ER_IRQHandler
+	.thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+	.weak	SPI1_IRQHandler
+	.thumb_set SPI1_IRQHandler,Default_Handler
+
+	.weak	SPI2_IRQHandler
+	.thumb_set SPI2_IRQHandler,Default_Handler
+
+	.weak	USART1_IRQHandler
+	.thumb_set USART1_IRQHandler,Default_Handler
+
+	.weak	USART2_IRQHandler
+	.thumb_set USART2_IRQHandler,Default_Handler
+
+	.weak	USART3_IRQHandler
+	.thumb_set USART3_IRQHandler,Default_Handler
+
+	.weak	EXTI15_10_IRQHandler
+	.thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+	.weak	RTC_Alarm_IRQHandler
+	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+	.weak	TIM8_BRK_IRQHandler
+	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+	.weak	TIM8_UP_IRQHandler
+	.thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+	.weak	TIM8_TRG_COM_IRQHandler
+	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+	.weak	TIM8_CC_IRQHandler
+	.thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+	.weak	ADC3_IRQHandler
+	.thumb_set ADC3_IRQHandler,Default_Handler
+
+	.weak	FMC_IRQHandler
+	.thumb_set FMC_IRQHandler,Default_Handler
+
+	.weak	SPI3_IRQHandler
+	.thumb_set SPI3_IRQHandler,Default_Handler
+
+	.weak	UART4_IRQHandler
+	.thumb_set UART4_IRQHandler,Default_Handler
+
+	.weak	UART5_IRQHandler
+	.thumb_set UART5_IRQHandler,Default_Handler
+
+	.weak	TIM6_DAC_IRQHandler
+	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+	.weak	TIM7_IRQHandler
+	.thumb_set TIM7_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel1_IRQHandler
+	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel2_IRQHandler
+	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel3_IRQHandler
+	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel4_IRQHandler
+	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+	.weak	DMA2_Channel5_IRQHandler
+	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+	.weak	ADC4_IRQHandler
+	.thumb_set ADC4_IRQHandler,Default_Handler	
+	
+	.weak	COMP1_2_3_IRQHandler
+	.thumb_set COMP1_2_3_IRQHandler,Default_Handler
+	
+	.weak	COMP4_5_6_IRQHandler
+	.thumb_set COMP4_5_6_IRQHandler,Default_Handler
+	
+	.weak	COMP7_IRQHandler
+	.thumb_set COMP7_IRQHandler,Default_Handler	
+	
+	.weak	I2C3_EV_IRQHandler
+	.thumb_set I2C3_EV_IRQHandler,Default_Handler	
+	
+	.weak	I2C3_ER_IRQHandler
+	.thumb_set I2C3_ER_IRQHandler,Default_Handler	
+	
+	.weak	TIM20_BRK_IRQHandler
+	.thumb_set TIM20_BRK_IRQHandler,Default_Handler
+	
+	.weak	TIM20_UP_IRQHandler
+	.thumb_set TIM20_UP_IRQHandler,Default_Handler
+	
+	.weak	TIM20_TRG_COM_IRQHandler
+	.thumb_set TIM20_TRG_COM_IRQHandler,Default_Handler
+	
+	.weak	TIM20_CC_IRQHandler
+	.thumb_set TIM20_CC_IRQHandler,Default_Handler
+	
+	.weak	FPU_IRQHandler
+	.thumb_set FPU_IRQHandler,Default_Handler
+	
+	.weak	SPI4_IRQHandler
+	.thumb_set SPI4_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/mcu/st/system-init/system_stm32f3xx.c b/hw/mcu/st/system-init/system_stm32f3xx.c
new file mode 100644
index 000000000..c6596e1f7
--- /dev/null
+++ b/hw/mcu/st/system-init/system_stm32f3xx.c
@@ -0,0 +1,314 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f3xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  * 1. This file provides two functions and one global variable to be called from
+  *    user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f3xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f3xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. This file configures the system clock as follows:
+  *=============================================================================
+  *                         Supported STM32F3xx device
+  *-----------------------------------------------------------------------------
+  *        System Clock source                    | HSI
+  *-----------------------------------------------------------------------------
+  *        SYSCLK(Hz)                             | 8000000
+  *-----------------------------------------------------------------------------
+  *        HCLK(Hz)                               | 8000000
+  *-----------------------------------------------------------------------------
+  *        AHB Prescaler                          | 1
+  *-----------------------------------------------------------------------------
+  *        APB2 Prescaler                         | 1
+  *-----------------------------------------------------------------------------
+  *        APB1 Prescaler                         | 1
+  *-----------------------------------------------------------------------------
+  *        USB Clock                              | DISABLE
+  *-----------------------------------------------------------------------------
+  *=============================================================================
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f3xx_system
+  * @{
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f3xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Defines
+  * @{
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field.
+                                  This value must be a multiple of 0x200. */
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock there is no need to
+               call the 2 first functions listed above, since SystemCoreClock variable is 
+               updated automatically.
+  */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F3xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and the PLL configuration is reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= 0x00000001U;
+
+  /* Reset CFGR register */
+  RCC->CFGR &= 0xF87FC00CU;
+
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= 0xFEF6FFFFU;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= 0xFFFBFFFFU;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */
+  RCC->CFGR &= 0xFF80FFFFU;
+
+  /* Reset PREDIV1[3:0] bits */
+  RCC->CFGR2 &= 0xFFFFFFF0U;
+
+  /* Reset USARTSW[1:0], I2CSW and TIMs bits */
+  RCC->CFGR3 &= 0xFF00FCCCU;
+
+  /* Disable all interrupts */
+  RCC->CIR = 0x00000000U;
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+  *              8 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case RCC_CFGR_SWS_HSI:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case RCC_CFGR_SWS_HSE:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case RCC_CFGR_SWS_PLL:  /* PLL used as system clock */
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      pllmull = ( pllmull >> 18) + 2;
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+        predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+      if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+      {
+        /* HSE oscillator clock selected as PREDIV1 clock entry */
+        SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+      }
+      else
+      {
+        /* HSI oscillator clock selected as PREDIV1 clock entry */
+        SystemCoreClock = (HSI_VALUE / predivfactor) * pllmull;
+      }
+#else      
+      if (pllsource == RCC_CFGR_PLLSRC_HSI_DIV2)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+        predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+        /* HSE oscillator clock selected as PREDIV1 clock entry */
+        SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+      }
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+      break;
+    default: /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+