simplify qspi flash with blocking API

2 files changed, 11 insertions, 59 deletions

diff --git a/examples/device/nrf52840/src/msc_flash_qspi.c b/examples/device/nrf52840/src/msc_flash_qspi.c
index d8058d8ac..53bdc5a71 100644
--- a/examples/device/nrf52840/src/msc_flash_qspi.c
+++ b/examples/device/nrf52840/src/msc_flash_qspi.c
@@ -47,19 +47,6 @@ void flash_flush (void);
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
-enum
-{
-  FLASH_STATE_IDLE,
-  FLASH_STATE_BUSY,
-  FLASH_STATE_COMPLETE
-};
-
-volatile uint8_t _fl_state = FLASH_STATE_IDLE;
-
-void qspi_flash_complete (void)
-{
-  _fl_state = FLASH_STATE_COMPLETE;
-}
 
 //------------- IMPLEMENTATION -------------//
 // Callback invoked when received READ10 command.
@@ -68,24 +55,8 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff
 {
   uint32_t addr = lba * CFG_TUD_MSC_BLOCK_SZ + offset;
 
-  switch ( _fl_state )
-  {
-    case FLASH_STATE_IDLE:
-      _fl_state = FLASH_STATE_BUSY;
-      flash_read(buffer, addr, bufsize);
-      return 0;    // data not ready
-
-    case FLASH_STATE_BUSY:
-      return 0;    // data not ready
-
-    case FLASH_STATE_COMPLETE:
-      _fl_state = FLASH_STATE_IDLE;
-      return bufsize;
-
-    default:
-      _fl_state = FLASH_STATE_IDLE;
-      return -1;
-  }
+  flash_read(buffer, addr, bufsize);
+  return bufsize;
 }
 
 // Callback invoked when received WRITE10 command.
@@ -124,16 +95,7 @@ void flash_flush (void)
   if ( _fl_addr == NO_CACHE ) return;
 
   TU_ASSERT(NRFX_SUCCESS == nrfx_qspi_erase(NRF_QSPI_ERASE_LEN_4KB, _fl_addr),);
-  while ( _fl_state != FLASH_STATE_COMPLETE )
-  {
-  }
-  _fl_state = FLASH_STATE_IDLE;
-
   TU_ASSERT(NRFX_SUCCESS == nrfx_qspi_write(_fl_buf, FLASH_PAGE_SIZE, _fl_addr),);
-  while ( _fl_state != FLASH_STATE_COMPLETE )
-  {
-  }
-  _fl_state = FLASH_STATE_IDLE;
 
   _fl_addr = NO_CACHE;
 }
diff --git a/hw/bsp/pca10056/board_pca10056.c b/hw/bsp/pca10056/board_pca10056.c
index 6e80a8eb0..6c7e38e12 100644
--- a/hw/bsp/pca10056/board_pca10056.c
+++ b/hw/bsp/pca10056/board_pca10056.c
@@ -77,23 +77,12 @@ uint32_t tusb_hal_millis(void)
 /* BOARD API
  *------------------------------------------------------------------*/
 enum {
-    QSPI_CMD_RSTEN = 0x66,
-    QSPI_CMD_RST = 0x99,
-    QSPI_CMD_WRSR = 0x01,
-    QSPI_CMD_READID = 0x90
+  QSPI_CMD_RSTEN = 0x66,
+  QSPI_CMD_RST = 0x99,
+  QSPI_CMD_WRSR = 0x01,
+  QSPI_CMD_READID = 0x90
 };
 
-extern void qspi_flash_complete (void);
-
-void qflash_hdl (nrfx_qspi_evt_t event, void * p_context)
-{
-  (void) p_context;
-  (void) event;
-
-  qspi_flash_complete();
-}
-
-
 /* tinyusb function that handles power event (detected, ready, removed)
  * We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
  */
@@ -143,7 +132,8 @@ void board_init(void)
     .irq_priority   = 7,
   };
 
-  nrfx_qspi_init(&qspi_cfg, qflash_hdl, NULL);
+  // NULL callback for blocking API
+  nrfx_qspi_init(&qspi_cfg, NULL, NULL);
 
   nrf_qspi_cinstr_conf_t cinstr_cfg = {
     .opcode    = 0,
@@ -180,10 +170,10 @@ void board_init(void)
   uint8_t dev_id = (uint8_t) NRF_QSPI->CINSTRDAT1;
   uint8_t mfgr_id = (uint8_t) ( NRF_QSPI->CINSTRDAT0 >> 24 );
 
-  // Switch to qspi mode
-  uint8_t sr_quad_en = 0x40;
+  // Switch to quad mode
+  uint16_t sr_quad_en = 0x40;
   cinstr_cfg.opcode = QSPI_CMD_WRSR;
-  cinstr_cfg.length = NRF_QSPI_CINSTR_LEN_2B;
+  cinstr_cfg.length = 3;
   cinstr_cfg.wipwait = cinstr_cfg.wren = true;
   nrfx_qspi_cinstr_xfer(&cinstr_cfg, &sr_quad_en, NULL);
 #endif