diff options
| author | hathach <[email protected]> | 2019-09-01 15:58:42 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2019-09-01 15:58:42 +0700 |
| commit | 403662a1d6b49e32cbf1adb4a05a1b3ac8982083 (patch) | |
| tree | 57018ff00f307e06ea7fc7ce9c3a637cf6487942 | |
| parent | fb1ca24b025bbda6372eb6fe6d40a60ad332cde7 (diff) | |
board_test run with lpc54114
| -rw-r--r-- | hw/bsp/lpcxpresso54114/board.mk | 7 | ||||
| -rw-r--r-- | hw/bsp/lpcxpresso54114/lpcxpresso54114.c | 22 | ||||
| -rw-r--r-- | src/tusb_option.h | 1 |
3 files changed, 17 insertions, 13 deletions
diff --git a/hw/bsp/lpcxpresso54114/board.mk b/hw/bsp/lpcxpresso54114/board.mk index 78a980388..71c227f9f 100644 --- a/hw/bsp/lpcxpresso54114/board.mk +++ b/hw/bsp/lpcxpresso54114/board.mk @@ -40,8 +40,9 @@ CHIP_FAMILY = lpc_usbd FREERTOS_PORT = ARM_CM4 # For flash-jlink target -JLINK_DEVICE = LPC54114 +JLINK_DEVICE = LPC54114J256_M4 JLINK_IF = swd -# flash using jlink -#flash: flash-jlink +# flash using pyocd +flash: $(BUILD)/$(BOARD)-firmware.elf + pyocd flash -v -e auto -t LPC54114 $< diff --git a/hw/bsp/lpcxpresso54114/lpcxpresso54114.c b/hw/bsp/lpcxpresso54114/lpcxpresso54114.c index cf9830862..9da1c6e5f 100644 --- a/hw/bsp/lpcxpresso54114/lpcxpresso54114.c +++ b/hw/bsp/lpcxpresso54114/lpcxpresso54114.c @@ -30,8 +30,8 @@ #include "fsl_power.h" #include "fsl_iocon.h" -#define LED_PORT 1 -#define LED_PIN 10 +#define LED_PORT 0 +#define LED_PIN 29 #define LED_STATE_ON 0 // WAKE button @@ -39,14 +39,16 @@ #define BUTTON_PIN 24 // IOCON pin mux -#define IOCON_PIO_DIGITAL_EN 0x80u /*!< Enables digital function */ -#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */ -#define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */ -#define IOCON_PIO_INPFILT_OFF 0x0100u /*!< Input filter disabled */ -#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */ -#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */ -#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */ -#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */ +#define IOCON_PIO_DIGITAL_EN 0x80u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC0 0x00u +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */ +#define IOCON_PIO_INPFILT_OFF 0x0100u /*!<@brief Input filter disabled */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_MODE_PULLUP 0x10u +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ /**************************************************************** name: BOARD_BootClockFROHF96M diff --git a/src/tusb_option.h b/src/tusb_option.h index bf1fac6ea..83a5c119b 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -43,6 +43,7 @@ #define OPT_MCU_LPC40XX 7 ///< NXP LPC40xx
#define OPT_MCU_LPC43XX 8 ///< NXP LPC43xx
#define OPT_MCU_LPC51UXX 9 ///< NXP LPC51U6x
+#define OPT_MCU_LPC54XXX 10 ///< NXP LPC54xxx
#define OPT_MCU_NRF5X 100 ///< Nordic nRF5x series
|