Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer

23 files changed, 867 insertions, 124 deletions

diff --git a/docs/boards.md b/docs/boards.md
index da8deb72a..e703d2490 100644
--- a/docs/boards.md
+++ b/docs/boards.md
@@ -86,6 +86,7 @@ This code base already had supported for a handful of following boards (sorted a
 - [LPCXpresso 54114](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso54114-board:OM13089)
 - [LPCXpresso 55s69 EVK](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpcxpresso55s69-development-board:LPC55S69-EVK)
 - [NGX LPC4330-Xplorer](https://www.nxp.com/design/designs/lpc4330-xplorer-board:OM13027)
+- [Double M33 Express](https://www.crowdsupply.com/steiert-solutions/double-m33-express)
 
 ### Sony
 
diff --git a/hw/bsp/double_m33_express/LPC55S69_cm33_core0_uf2.ld b/hw/bsp/double_m33_express/LPC55S69_cm33_core0_uf2.ld
new file mode 100644
index 000000000..6b5d852aa
--- /dev/null
+++ b/hw/bsp/double_m33_express/LPC55S69_cm33_core0_uf2.ld
@@ -0,0 +1,234 @@
+/*
+** ###################################################################
+**     Processors:          LPC55S69JBD100_cm33_core0
+**                          LPC55S69JBD64_cm33_core0
+**                          LPC55S69JEV98_cm33_core0
+**
+**     Compiler:            GNU C Compiler
+**     Reference manual:    LPC55S6x/LPC55S2x/LPC552x User manual(UM11126) Rev.1.3  16 May 2019
+**     Version:             rev. 1.1, 2019-05-16
+**     Build:               b191008
+**
+**     Abstract:
+**         Linker file for the GNU C Compiler
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2019 NXP
+**     All rights reserved.
+**
+**     SPDX-License-Identifier: BSD-3-Clause
+**
+**     http:                 www.nxp.com
+**     mail:                 [email protected]
+**
+** ###################################################################
+*/
+
+
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+HEAP_SIZE  = DEFINED(__heap_size__)  ? __heap_size__  : 0x0400;
+STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0800;
+RPMSG_SHMEM_SIZE = DEFINED(__use_shmem__) ? 0x1800 : 0;
+
+/* Specify the memory areas */
+MEMORY
+{
+  m_interrupts          (RX)  : ORIGIN = 0x00010000, LENGTH = 0x00000200
+  m_text                (RX)  : ORIGIN = 0x00010200, LENGTH = 0x0007FE00
+  m_core1_image         (RX)  : ORIGIN = 0x00090000, LENGTH = 0x00008000
+  m_data                (RW)  : ORIGIN = 0x20000000, LENGTH = 0x00033000 - RPMSG_SHMEM_SIZE
+  rpmsg_sh_mem          (RW)  : ORIGIN = 0x20033000 - RPMSG_SHMEM_SIZE, LENGTH = RPMSG_SHMEM_SIZE
+  m_usb_sram            (RW)  : ORIGIN = 0x40100000, LENGTH = 0x00004000
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* section for storing the secondary core image */
+  .m0code :
+  {
+     . = ALIGN(4) ;
+    KEEP (*(.m0code))
+     *(.m0code*)
+     . = ALIGN(4) ;
+  } > m_core1_image
+
+  /* NOINIT section for rpmsg_sh_mem */
+  .noinit_rpmsg_sh_mem (NOLOAD) : ALIGN(4)
+  {
+     __RPMSG_SH_MEM_START__ = .;
+     *(.noinit.$rpmsg_sh_mem*)
+     . = ALIGN(4) ;
+     __RPMSG_SH_MEM_END__ = .;
+  } > rpmsg_sh_mem
+
+  /* The startup code goes first into internal flash */
+  .interrupts :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector))     /* Startup code */
+    . = ALIGN(4);
+  } > m_interrupts
+
+  /* The program code and other data goes into internal flash */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)                 /* .text sections (code) */
+    *(.text*)                /* .text* sections (code) */
+    *(.rodata)               /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)              /* .rodata* sections (constants, strings, etc.) */
+    *(.glue_7)               /* glue arm to thumb code */
+    *(.glue_7t)              /* glue thumb to arm code */
+    *(.eh_frame)
+    KEEP (*(.init))
+    KEEP (*(.fini))
+    . = ALIGN(4);
+  } > m_text
+
+  .ARM.extab :
+  {
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+  } > m_text
+
+  .ARM :
+  {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } > m_text
+
+ .ctors :
+  {
+    __CTOR_LIST__ = .;
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       from the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __CTOR_END__ = .;
+  } > m_text
+
+  .dtors :
+  {
+    __DTOR_LIST__ = .;
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    __DTOR_END__ = .;
+  } > m_text
+
+  .preinit_array :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } > m_text
+
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } > m_text
+
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } > m_text
+
+  __etext = .;    /* define a global symbol at end of code */
+  __DATA_ROM = .; /* Symbol is used by startup for data initialization */
+
+  .data : AT(__DATA_ROM)
+  {
+    . = ALIGN(4);
+    __DATA_RAM = .;
+    __data_start__ = .;      /* create a global symbol at data start */
+    *(.ramfunc*)             /* for functions in ram */
+    *(.data)                 /* .data sections */
+    *(.data*)                /* .data* sections */
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+    __data_end__ = .;        /* define a global symbol at data end */
+  } > m_data
+
+  __DATA_END = __DATA_ROM + (__data_end__ - __data_start__);
+  text_end = ORIGIN(m_text) + LENGTH(m_text);
+  ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data")
+
+  /* Uninitialized data section */
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    . = ALIGN(4);
+    __START_BSS = .;
+    __bss_start__ = .;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+    __END_BSS = .;
+  } > m_data
+
+  .heap :
+  {
+    . = ALIGN(8);
+    __end__ = .;
+    PROVIDE(end = .);
+    __HeapBase = .;
+    . += HEAP_SIZE;
+    __HeapLimit = .;
+    __heap_limit = .; /* Add for _sbrk */
+  } > m_data
+
+  .stack :
+  {
+    . = ALIGN(8);
+    . += STACK_SIZE;
+  } > m_data
+
+  m_usb_bdt (NOLOAD) :
+  {
+    . = ALIGN(512);
+    *(m_usb_bdt)
+  } > m_usb_sram
+
+  m_usb_global (NOLOAD) :
+  {
+    *(m_usb_global)
+  } > m_usb_sram
+
+  /* Initializes stack on the end of block */
+  __StackTop   = ORIGIN(m_data) + LENGTH(m_data);
+  __StackLimit = __StackTop - STACK_SIZE;
+  PROVIDE(__stack = __StackTop);
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+
+  ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap")
+}
+
diff --git a/hw/bsp/double_m33_express/board.mk b/hw/bsp/double_m33_express/board.mk
new file mode 100644
index 000000000..df42ad4cc
--- /dev/null
+++ b/hw/bsp/double_m33_express/board.mk
@@ -0,0 +1,51 @@
+CFLAGS += \
+  -flto \
+  -mthumb \
+  -mabi=aapcs \
+  -mcpu=cortex-m33 \
+  -mfloat-abi=hard \
+  -mfpu=fpv5-sp-d16 \
+  -DCPU_LPC55S69JBD100_cm33_core0 \
+  -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \
+  -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
+  -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
+
+# mcu driver cause following warnings
+CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal
+
+MCU_DIR = hw/mcu/nxp/sdk/devices/LPC55S69
+
+# All source paths should be relative to the top level.
+LD_FILE = hw/bsp/$(BOARD)/LPC55S69_cm33_core0_uf2.ld
+
+SRC_C += \
+	$(MCU_DIR)/system_LPC55S69_cm33_core0.c \
+	$(MCU_DIR)/drivers/fsl_clock.c \
+	$(MCU_DIR)/drivers/fsl_gpio.c \
+	$(MCU_DIR)/drivers/fsl_power.c \
+	$(MCU_DIR)/drivers/fsl_reset.c \
+	$(MCU_DIR)/drivers/fsl_usart.c \
+	$(MCU_DIR)/drivers/fsl_flexcomm.c 
+
+INC += \
+	$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
+	$(TOP)/$(MCU_DIR) \
+	$(TOP)/$(MCU_DIR)/drivers
+
+SRC_S += $(MCU_DIR)/gcc/startup_LPC55S69_cm33_core0.S
+
+LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a
+
+# For TinyUSB port source
+VENDOR = nxp
+CHIP_FAMILY = lpc_ip3511
+
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM33_NTZ/non_secure
+
+# For flash-jlink target
+JLINK_DEVICE = LPC55S69
+
+# flash using pyocd
+flash: $(BUILD)/$(BOARD)-firmware.hex
+	pyocd flash -t LPC55S69 $<
diff --git a/hw/bsp/double_m33_express/double_m33_express.c b/hw/bsp/double_m33_express/double_m33_express.c
new file mode 100644
index 000000000..187313a41
--- /dev/null
+++ b/hw/bsp/double_m33_express/double_m33_express.c
@@ -0,0 +1,400 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018, hathach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "../board.h"
+#include "fsl_device_registers.h"
+#include "fsl_gpio.h"
+#include "fsl_power.h"
+#include "fsl_iocon.h"
+#include "fsl_sctimer.h"
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USB0_IRQHandler(void)
+{
+  tud_int_handler(0);
+}
+
+void USB1_IRQHandler(void)
+{
+  tud_int_handler(1);
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM
+//--------------------------------------------------------------------+
+#define LED_PORT              0
+#define LED_PIN               1
+#define LED_STATE_ON          1
+
+// WAKE button
+#define BUTTON_PORT           0
+#define BUTTON_PIN            5
+#define BUTTON_STATE_ACTIVE   0
+
+// Number of neopixels
+#define NEOPIXEL_NUMBER       2
+#define NEOPIXEL_PORT         0
+#define NEOPIXEL_PIN          27
+
+// UART
+#define UART_DEV              USART0
+
+// IOCON pin mux
+#define IOCON_PIO_DIGITAL_EN 0x0100u  /*!<@brief Enables digital function */
+#define IOCON_PIO_FUNC0 0x00u         /*!<@brief Selects pin function 0 */
+#define IOCON_PIO_FUNC1 0x01u         /*!<@brief Selects pin function 1 */
+#define IOCON_PIO_FUNC4 0x04u         /*!<@brief Selects pin function 4 */
+#define IOCON_PIO_FUNC7 0x07u         /*!<@brief Selects pin function 7 */
+#define IOCON_PIO_INV_DI 0x00u        /*!<@brief Input function is not inverted */
+#define IOCON_PIO_MODE_INACT 0x00u    /*!<@brief No addition pin function */
+#define IOCON_PIO_OPENDRAIN_DI 0x00u  /*!<@brief Open drain is disabled */
+#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
+
+#define IOCON_PIO_DIG_FUNC0_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) /*!<@brief Digital pin function 0 enabled */
+#define IOCON_PIO_DIG_FUNC1_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) /*!<@brief Digital pin function 1 enabled */
+#define IOCON_PIO_DIG_FUNC4_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC4) /*!<@brief Digital pin function 2 enabled */
+#define IOCON_PIO_DIG_FUNC7_EN   (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC7) /*!<@brief Digital pin function 2 enabled */
+
+//--------------------------------------------------------------------+
+// Neopixel Driver
+//--------------------------------------------------------------------+
+#define NEO_SCT           SCT0
+#define NEO_MATCH_PERIOD  0
+#define NEO_MATCH_0       1
+#define NEO_MATCH_1       2
+#define NEO_EVENT_RISE    2
+#define NEO_EVENT_FALL_0  0
+#define NEO_EVENT_FALL_1  1
+#define NEO_EVENT_NEXT    3
+#define NEO_EVENT_START   4
+#define NEO_SCT_OUTPUT    6
+#define NEO_STATE_IDLE    24
+//#define NEO_ARRAY_SIZE    (3 * NEOPIXEL_NUMBER)
+
+//volatile uint32_t _neopixel_array[NEO_ARRAY_SIZE] = {0x10, 0x20, 0x30, 0x40, 0x50, 0x60};
+volatile uint32_t _neopixel_array[NEOPIXEL_NUMBER] = {0x404040, 0x202020};
+volatile uint32_t _neopixel_count = 0;
+
+void neopixel_int_handler(void){
+  uint32_t eventFlag = NEO_SCT->EVFLAG;
+  if (eventFlag & (1 << NEO_EVENT_NEXT)) {
+    _neopixel_count += 1;
+    if (_neopixel_count < (NEOPIXEL_NUMBER)) {
+      NEO_SCT->EV[NEO_EVENT_FALL_0].STATE = 0xFFFFFF & (~_neopixel_array[_neopixel_count]);
+      NEO_SCT->CTRL &= ~(SCT_CTRL_HALT_L_MASK);
+    }
+  }
+  NEO_SCT->EVFLAG = eventFlag;
+}
+
+void SCT0_DriverIRQHandler(void){
+  neopixel_int_handler();
+  SDK_ISR_EXIT_BARRIER;
+}
+
+void neopixel_set(uint32_t pixel, uint32_t color){
+  if (pixel < NEOPIXEL_NUMBER) { 
+    _neopixel_array[pixel] = color;
+  }
+}
+
+void neopixel_update(void){
+//  while (NEO_SCT->CTRL & SCT_CTRL_HALT_L_MASK);
+  _neopixel_count = 0;
+  NEO_SCT->EV[NEO_EVENT_FALL_0].STATE = 0xFFFFFF & (~_neopixel_array[0]);
+  NEO_SCT->CTRL &= ~(SCT_CTRL_HALT_L_MASK);
+}
+
+
+/*
+void neopixel_int_handler(void){
+  uint32_t eventFlag = NEO_SCT->EVFLAG;
+//  if ((eventFlag & (1 << NEO_EVENT_NEXT)) && (_neopixel_count < (NEO_ARRAY_SIZE))) {
+//    NEO_SCT->EV[NEO_EVENT_FALL_0].STATE = 0xFF & (~_neopixel_array[_neopixel_count]);
+  if ((eventFlag & (1 << NEO_EVENT_NEXT)) && (_neopixel_count < (NEOPIXEL_NUMBER))) {
+    _neopixel_count += 1;
+    NEO_SCT->EV[NEO_EVENT_FALL_0].STATE = 0xFFFFFF & (~_neopixel_array[_neopixel_count]);
+    NEO_SCT->EVFLAG = eventFlag;
+    NEO_SCT->CTRL &= ~(SCT_CTRL_HALT_L_MASK);
+  } else {
+    NEO_SCT->EVFLAG = eventFlag;
+  }
+}
+
+void SCT0_DriverIRQHandler(void){
+  neopixel_int_handler();
+  SDK_ISR_EXIT_BARRIER;
+}
+
+void neopixel_update(uint32_t pixel, uint32_t color){
+  if (pixel < NEOPIXEL_NUMBER) { 
+    _neopixel_array[pixel] = color;
+    _neopixel_count = 0;
+//    NEO_SCT->EV[NEO_EVENT_FALL_0].STATE = 0xFF & (~_neopixel_array[0]);
+    NEO_SCT->EV[NEO_EVENT_FALL_0].STATE = 0xFFFFFF & (~_neopixel_array[0]);
+    NEO_SCT->CTRL &= ~(SCT_CTRL_HALT_L_MASK);
+  }
+}
+*/
+void neopixel_init(void) {
+  CLOCK_EnableClock(kCLOCK_Sct0);
+  RESET_PeripheralReset(kSCT0_RST_SHIFT_RSTn);
+
+  NEO_SCT->CONFIG = (
+    SCT_CONFIG_UNIFY(1) | 
+    SCT_CONFIG_CLKMODE(kSCTIMER_System_ClockMode) | 
+    SCT_CONFIG_NORELOAD_L(1) );
+  NEO_SCT->CTRL = ( 
+    SCT_CTRL_HALT_L(1) |
+    SCT_CTRL_CLRCTR_L(1) );
+
+  NEO_SCT->MATCH[NEO_MATCH_PERIOD] = 120;
+  NEO_SCT->MATCH[NEO_MATCH_0] = 30;
+  NEO_SCT->MATCH[NEO_MATCH_1] = 60;
+  NEO_SCT->EV[NEO_EVENT_START].STATE = (1 << NEO_STATE_IDLE);
+  NEO_SCT->EV[NEO_EVENT_START].CTRL = (
+    kSCTIMER_OutputLowEvent | SCT_EV_CTRL_IOSEL(NEO_SCT_OUTPUT) | 
+    SCT_EV_CTRL_STATELD(1) | SCT_EV_CTRL_STATEV(23));
+//  NEO_SCT->EV[NEO_EVENT_RISE].STATE = 0xFE;
+  NEO_SCT->EV[NEO_EVENT_RISE].STATE = 0xFFFFFE;
+  NEO_SCT->EV[NEO_EVENT_RISE].CTRL = (
+    kSCTIMER_MatchEventOnly | SCT_EV_CTRL_MATCHSEL(NEO_MATCH_PERIOD) | 
+    SCT_EV_CTRL_STATELD(0) | SCT_EV_CTRL_STATEV(31));
+  NEO_SCT->EV[NEO_EVENT_FALL_0].STATE = 0x0;
+  NEO_SCT->EV[NEO_EVENT_FALL_0].CTRL = (
+    kSCTIMER_MatchEventOnly | SCT_EV_CTRL_MATCHSEL(NEO_MATCH_0) | 
+    SCT_EV_CTRL_STATELD(0) );
+//  NEO_SCT->EV[NEO_EVENT_FALL_1].STATE = 0xFF;
+  NEO_SCT->EV[NEO_EVENT_FALL_1].STATE = 0xFFFFFF;
+  NEO_SCT->EV[NEO_EVENT_FALL_1].CTRL = (
+    kSCTIMER_MatchEventOnly | SCT_EV_CTRL_MATCHSEL(NEO_MATCH_1) | 
+    SCT_EV_CTRL_STATELD(0) );
+  NEO_SCT->EV[NEO_EVENT_NEXT].STATE = 0x1;
+  NEO_SCT->EV[NEO_EVENT_NEXT].CTRL = (
+    kSCTIMER_MatchEventOnly | SCT_EV_CTRL_MATCHSEL(NEO_MATCH_PERIOD) | 
+    SCT_EV_CTRL_STATELD(1) | SCT_EV_CTRL_STATEV(NEO_STATE_IDLE));
+
+  NEO_SCT->LIMIT = (1 << NEO_EVENT_START) | (1 << NEO_EVENT_RISE) | (1 << NEO_EVENT_NEXT);
+  NEO_SCT->HALT = (1 << NEO_EVENT_NEXT);
+  NEO_SCT->START = (1 << NEO_EVENT_START);
+
+  NEO_SCT->OUT[NEO_SCT_OUTPUT].SET = (1 << NEO_EVENT_START) | (1 << NEO_EVENT_RISE);
+  NEO_SCT->OUT[NEO_SCT_OUTPUT].CLR = (1 << NEO_EVENT_FALL_0) | (1 << NEO_EVENT_FALL_1) | (1 << NEO_EVENT_NEXT);
+  
+  NEO_SCT->STATE = NEO_STATE_IDLE; 
+  NEO_SCT->OUTPUT = 0x0;
+  NEO_SCT->RES = SCT_RES_O6RES(0x2);
+  NEO_SCT->EVEN = (1 << NEO_EVENT_NEXT);
+  EnableIRQ(SCT0_IRQn);
+
+  neopixel_set(0, 0x101000);
+  neopixel_set(1, 0x101000);
+  neopixel_update();
+}
+
+
+/****************************************************************
+name: BOARD_BootClockFROHF96M
+outputs:
+- {id: SYSTICK_clock.outFreq, value: 96 MHz}
+- {id: System_clock.outFreq, value: 96 MHz}
+settings:
+- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf}
+sources:
+- {id: SYSCON.fro_hf.outFreq, value: 96 MHz}
+******************************************************************/
+void BootClockFROHF96M(void)
+{
+  /*!< Set up the clock sources */
+  /*!< Set up FRO */
+  POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on  */
+  CLOCK_SetupFROClocking(12000000U);     /*!< Set up FRO to the 12 MHz, just for sure */
+  CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without
+                                             accidentally being below the voltage for current speed */
+
+  CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */
+
+  POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
+  CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
+
+  /*!< Set up dividers */
+  CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false);     /*!< Set AHBCLKDIV divider to value 1 */
+
+  /*!< Set up clock selectors - Attach clocks to the peripheries */
+  CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
+
+  /*!< Set SystemCoreClock variable. */
+  SystemCoreClock = 96000000U;
+}
+
+void board_init(void)
+{
+  // Enable IOCON clock
+  CLOCK_EnableClock(kCLOCK_Iocon);
+
+  // Init 96 MHz clock
+  BootClockFROHF96M();
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
+#endif
+
+  GPIO_PortInit(GPIO, 0);
+  GPIO_PortInit(GPIO, 1);
+
+  // LED
+  /* PORT0 PIN1 configured as PIO0_1 */
+  IOCON_PinMuxSet(IOCON, 0U, 1U, IOCON_PIO_DIG_FUNC0_EN);
+
+  gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 1};
+  GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config);
+
+  // Neopixel
+  /* PORT0 PIN27 configured as SCT0_OUT6 */
+  IOCON_PinMuxSet(IOCON, NEOPIXEL_PORT, NEOPIXEL_PIN, IOCON_PIO_DIG_FUNC4_EN);
+
+  neopixel_init();
+
+  // Button
+  /* PORT0 PIN5 configured as PIO0_5 */
+  IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN);
+
+  gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0};
+  GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config);
+
+  // UART
+  /* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
+  IOCON_PinMuxSet(IOCON, 0U, 29U, IOCON_PIO_DIG_FUNC1_EN);
+  /* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
+  IOCON_PinMuxSet(IOCON, 0U, 30U, IOCON_PIO_DIG_FUNC1_EN);
+
+#if defined(UART_DEV) && CFG_TUSB_DEBUG
+  // Enable UART when debug log is on
+  CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0);
+  usart_config_t uart_config;
+  USART_GetDefaultConfig(&uart_config);
+  uart_config.baudRate_Bps = BOARD_UART_BAUDRATE;
+  uart_config.enableTx     = true;
+  uart_config.enableRx     = true;
+  USART_Init(UART_DEV, &uart_config, 12000000);
+#endif
+
+  // USB VBUS
+  /* PORT0 PIN22 configured as USB0_VBUS */
+  IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN);
+
+  // USB Controller
+  POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB0 Phy */
+  POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); /*< Turn on USB1 Phy */
+
+  /* reset the IP to make sure it's in reset state. */
+  RESET_PeripheralReset(kUSB0D_RST_SHIFT_RSTn);
+  RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn);
+  RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn);
+  RESET_PeripheralReset(kUSB1H_RST_SHIFT_RSTn);
+  RESET_PeripheralReset(kUSB1D_RST_SHIFT_RSTn);
+  RESET_PeripheralReset(kUSB1_RST_SHIFT_RSTn);
+  RESET_PeripheralReset(kUSB1RAM_RST_SHIFT_RSTn);
+
+#if (defined CFG_TUSB_RHPORT1_MODE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE)
+  CLOCK_EnableClock(kCLOCK_Usbh1);
+  /* Put PHY powerdown under software control */
+  USBHSH->PORTMODE = USBHSH_PORTMODE_SW_PDCOM_MASK;
+  /* According to reference mannual, device mode setting has to be set by access usb host register */
+  USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK;
+  /* enable usb1 host clock */
+  CLOCK_DisableClock(kCLOCK_Usbh1);
+#endif
+
+#if (defined CFG_TUSB_RHPORT0_MODE) && (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE)
+  // Enable USB Clock Adjustments to trim the FRO for the full speed controller
+  ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK;
+  CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false);
+  CLOCK_AttachClk(kFRO_HF_to_USB0_CLK);
+  /* enable usb0 host clock */
+  CLOCK_EnableClock(kCLOCK_Usbhsl0);
+  /*According to reference mannual, device mode setting has to be set by access usb host register */
+  USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK;
+  /* disable usb0 host clock */
+  CLOCK_DisableClock(kCLOCK_Usbhsl0);
+  CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB Device clock */
+#endif
+
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state)
+{
+  GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
+  if (state) {
+    neopixel_set(0, 0x100000);
+    neopixel_set(1, 0x101010);
+  } else {
+    neopixel_set(0, 0x001000);
+    neopixel_set(1, 0x000010);
+  }
+  neopixel_update();
+}
+
+uint32_t board_button_read(void)
+{
+  // active low
+  return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN);
+}
+
+int board_uart_read(uint8_t* buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+int board_uart_write(void const * buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler(void)
+{
+  system_ticks++;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+#endif
diff --git a/src/class/hid/hid_device.h b/src/class/hid/hid_device.h
index 2d4c59d8f..456b011ba 100644
--- a/src/class/hid/hid_device.h
+++ b/src/class/hid/hid_device.h
@@ -46,7 +46,7 @@
 #endif
 
 #ifndef CFG_TUD_HID_EP_BUFSIZE
-  #define CFG_TUD_HID_EP_BUFSIZE     16
+  #define CFG_TUD_HID_EP_BUFSIZE     64
 #endif
 
 //--------------------------------------------------------------------+
diff --git a/src/device/usbd.c b/src/device/usbd.c
index 55e76bb66..05acb7019 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -1103,6 +1103,24 @@ bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep)
 {
   TU_LOG2("  Open EP %02X with Size = %u\r\n", desc_ep->bEndpointAddress, desc_ep->wMaxPacketSize.size);
 
+  if (TUSB_XFER_ISOCHRONOUS == desc_ep->bmAttributes.xfer)
+  {
+    TU_ASSERT(desc_ep->wMaxPacketSize.size <= (_usbd_dev.speed == TUSB_SPEED_HIGH ? 1024 : 1023));
+  }
+  else
+  {
+    uint16_t const max_epsize = (_usbd_dev.speed == TUSB_SPEED_HIGH ? 512 : 64);
+
+    if (TUSB_XFER_BULK == desc_ep->bmAttributes.xfer)
+    {
+      // Bulk must be EXACTLY 512/64 bytes
+      TU_ASSERT(desc_ep->wMaxPacketSize.size == max_epsize);
+    }else
+    {
+      TU_ASSERT(desc_ep->wMaxPacketSize.size <= max_epsize);
+    }
+  }
+
   return dcd_edpt_open(rhport, desc_ep);
 }
 
diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c
index 42ba867d7..59f728d08 100644
--- a/src/portable/dialog/da146xx/dcd_da146xx.c
+++ b/src/portable/dialog/da146xx/dcd_da146xx.c
@@ -664,7 +664,7 @@ static void handle_bus_reset(void)
   (void)USB->USB_ALTEV_REG;
   _dcd.in_reset = true;
 
-  dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+  dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
   USB->USB_DMA_CTRL_REG = 0;
 
   USB->USB_MAMSK_REG = USB_USB_MAMSK_REG_USB_M_INTR_Msk |
@@ -821,14 +821,13 @@ void dcd_disconnect(uint8_t rhport)
 
 bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
 {
+  (void)rhport;
+
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir   = tu_edpt_dir(desc_edpt->bEndpointAddress);
   xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
   uint8_t iso_mask = 0;
-  
-  (void)rhport;
 
-  TU_ASSERT(desc_edpt->wMaxPacketSize.size <= 1023);
   TU_ASSERT(epnum < EP_MAX);
 
   xfer->max_packet_size = desc_edpt->wMaxPacketSize.size;
diff --git a/src/portable/espressif/esp32s2/dcd_esp32s2.c b/src/portable/espressif/esp32s2/dcd_esp32s2.c
index cd66af805..703841759 100644
--- a/src/portable/espressif/esp32s2/dcd_esp32s2.c
+++ b/src/portable/espressif/esp32s2/dcd_esp32s2.c
@@ -252,7 +252,6 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt)
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress);
 
-  TU_ASSERT(desc_edpt->wMaxPacketSize.size <= 64);
   TU_ASSERT(epnum < EP_MAX);
 
   xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir);
diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c
index f1dca88a5..3cff92fcd 100644
--- a/src/portable/microchip/samd/dcd_samd.c
+++ b/src/portable/microchip/samd/dcd_samd.c
@@ -37,14 +37,23 @@
 /* MACRO TYPEDEF CONSTANT ENUM
  *------------------------------------------------------------------*/
 static TU_ATTR_ALIGNED(4) UsbDeviceDescBank sram_registers[8][2];
-static TU_ATTR_ALIGNED(4) uint8_t _setup_packet[8];
+
+// Setup packet is only 8 bytes in length. However under certain scenario,
+// USB DMA controller may decide to overwrite/overflow the buffer  with
+// 2 extra bytes of CRC. From datasheet's "Management of SETUP Transactions" section
+//    If the number of received data bytes is the maximum data payload specified by
+//    PCKSIZE.SIZE minus one, only the first CRC data is written to the data buffer.
+//    If the number of received data is equal or less than the data payload specified
+//    by PCKSIZE.SIZE minus two, both CRC data bytes are written to the data buffer.
+// Therefore we will need to increase it to 10 bytes here.
+static TU_ATTR_ALIGNED(4) uint8_t _setup_packet[8+2];
 
 // ready for receiving SETUP packet
 static inline void prepare_setup(void)
 {
   // Only make sure the EP0 OUT buffer is ready
   sram_registers[0][0].ADDR.reg = (uint32_t) _setup_packet;
-  sram_registers[0][0].PCKSIZE.bit.MULTI_PACKET_SIZE = sizeof(_setup_packet);
+  sram_registers[0][0].PCKSIZE.bit.MULTI_PACKET_SIZE = sizeof(tusb_control_request_t);
   sram_registers[0][0].PCKSIZE.bit.BYTE_COUNT = 0;
 }
 
@@ -378,7 +387,7 @@ void dcd_int_handler (uint8_t rhport)
     USB->DEVICE.INTENCLR.reg = USB_DEVICE_INTFLAG_WAKEUP | USB_DEVICE_INTFLAG_SUSPEND;
 
     bus_reset();
-    dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
   }
 
   // Handle SETUP packet
diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c
index 2b64df50b..2f9f1097f 100644
--- a/src/portable/microchip/samg/dcd_samg.c
+++ b/src/portable/microchip/samg/dcd_samg.c
@@ -338,7 +338,7 @@ void dcd_int_handler(uint8_t rhport)
   if (intr_status & UDP_ISR_ENDBUSRES_Msk)
   {
     bus_reset();
-    dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
   }
 
   // SOF
diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c
index b85d3776f..d9fe2b6ae 100644
--- a/src/portable/nordic/nrf5x/dcd_nrf5x.c
+++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c
@@ -533,7 +533,7 @@ void dcd_int_handler(uint8_t rhport)
   if ( int_status & USBD_INTEN_USBRESET_Msk )
   {
     bus_reset();
-    dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
   }
 
   // ISOIN: Data was moved to endpoint buffer, client will be notified in SOF
diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c
index 1a0007d8a..dc48e54cc 100644
--- a/src/portable/nuvoton/nuc120/dcd_nuc120.c
+++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c
@@ -329,8 +329,7 @@ void dcd_int_handler(uint8_t rhport)
       USBD->ATTR |= USBD_ATTR_USB_EN_Msk | USBD_ATTR_PHY_EN_Msk;
 
       bus_reset();
-
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     }
 
     if(state & USBD_STATE_SUSPEND)
diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c
index af7fee8b0..c9ead6de0 100644
--- a/src/portable/nuvoton/nuc121/dcd_nuc121.c
+++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c
@@ -340,7 +340,7 @@ void dcd_int_handler(uint8_t rhport)
 
       bus_reset();
 
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     }
 
     if(state & USBD_ATTR_SUSPEND_Msk)
diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c
index 8357bf2b8..519b8fb7b 100644
--- a/src/portable/nxp/khci/dcd_khci.c
+++ b/src/portable/nxp/khci/dcd_khci.c
@@ -224,7 +224,7 @@ static void process_bus_reset(uint8_t rhport)
   _dcd.addr = 0;
   prepare_next_setup_packet(rhport);
   KHCI->CTL &= ~USB_CTL_ODDRST_MASK;
-  dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true);
+  dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
 }
 
 static void process_bus_inactive(uint8_t rhport)
diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
index 39c5e6638..7d867aaba 100644
--- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
+++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
@@ -471,7 +471,7 @@ static void bus_event_isr(uint8_t rhport)
   if (dev_status & SIE_DEV_STATUS_RESET_MASK)
   {
     bus_reset();
-    dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
   }
 
   if (dev_status & SIE_DEV_STATUS_CONNECT_CHANGE_MASK)
diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
index 3d1420c65..e4d92458c 100644
--- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
+++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
@@ -243,7 +243,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
   (void) rhport;
 
   // TODO not support ISO yet
-  if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) return false;
+  TU_VERIFY(p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS);
 
   //------------- Prepare Queue Head -------------//
   uint8_t ep_id = ep_addr2id(p_endpoint_desc->bEndpointAddress);
@@ -357,7 +357,7 @@ void dcd_int_handler(uint8_t rhport)
     if ( cmd_stat & CMDSTAT_RESET_CHANGE_MASK) // bus reset
     {
       bus_reset();
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     }
 
     if (cmd_stat & CMDSTAT_CONNECT_CHANGE_MASK)
diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
index dc125a758..18f0bc8e1 100644
--- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
@@ -547,7 +547,7 @@ void dcd_int_handler(uint8_t rhport) {
     // USBRST is start of reset.
     clear_istr_bits(USB_ISTR_RESET);
     dcd_handle_bus_reset();
-    dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     return; // Don't do the rest of the things here; perhaps they've been cleared?
   }
 
diff --git a/src/portable/st/synopsys/dcd_synopsys.c b/src/portable/st/synopsys/dcd_synopsys.c
index 0aee6a919..507e5246a 100644
--- a/src/portable/st/synopsys/dcd_synopsys.c
+++ b/src/portable/st/synopsys/dcd_synopsys.c
@@ -46,13 +46,13 @@
 #define STM32L4_SYNOPSYS
 #endif
 
-#if TUSB_OPT_DEVICE_ENABLED && \
+#if TUSB_OPT_DEVICE_ENABLED &&                                          \
     ( (CFG_TUSB_MCU == OPT_MCU_STM32F1 && defined(STM32F1_SYNOPSYS)) || \
-        CFG_TUSB_MCU == OPT_MCU_STM32F2 || \
-        CFG_TUSB_MCU == OPT_MCU_STM32F4 || \
-        CFG_TUSB_MCU == OPT_MCU_STM32F7 || \
-        CFG_TUSB_MCU == OPT_MCU_STM32H7 || \
-        (CFG_TUSB_MCU == OPT_MCU_STM32L4 && defined(STM32L4_SYNOPSYS)) \
+       CFG_TUSB_MCU == OPT_MCU_STM32F2                               || \
+       CFG_TUSB_MCU == OPT_MCU_STM32F4                               || \
+       CFG_TUSB_MCU == OPT_MCU_STM32F7                               || \
+       CFG_TUSB_MCU == OPT_MCU_STM32H7                               || \
+      (CFG_TUSB_MCU == OPT_MCU_STM32L4 && defined(STM32L4_SYNOPSYS))    \
     )
 
 // EP_MAX       : Max number of bi-directional endpoints including EP0
@@ -116,6 +116,7 @@
 #define EP_FIFO_SIZE      EP_FIFO_SIZE_HS
 #define RHPORT_REGS_BASE  USB_OTG_HS_PERIPH_BASE
 #define RHPORT_IRQn       OTG_HS_IRQn
+
 #endif
 
 #define GLOBAL_BASE(_port)     ((USB_OTG_GlobalTypeDef*) RHPORT_REGS_BASE)
@@ -141,25 +142,40 @@ typedef struct {
   uint8_t interval;
 } xfer_ctl_t;
 
-// EP size and transfer type report
-typedef struct TU_ATTR_PACKED {
-  // The following format may look complicated but it is the most elegant way of addressing the required fields: EP number, EP direction, and EP transfer type.
-  // The codes assigned to those fields, according to the USB specification, can be neatly used as indices.
-  uint16_t ep_size[EP_MAX][2];          ///< dim 1: EP number, dim 2: EP direction denoted by TUSB_DIR_OUT (= 0) and TUSB_DIR_IN (= 1)
-  bool ep_transfer_type[EP_MAX][2][4];      ///< dim 1: EP number, dim 2: EP direction, dim 3: transfer type, where 0 = Control, 1 = Isochronous, 2 = Bulk, and 3 = Interrupt
-  ///< I know very well that EP0 can only be used as control EP and we waste space here but for the sake of simplicity we accept that. It is used in a non-persistent way anyway!
-} ep_sz_tt_report_t;
-
 typedef volatile uint32_t * usb_fifo_t;
 
 xfer_ctl_t xfer_status[EP_MAX][2];
 #define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir]
 
 // EP0 transfers are limited to 1 packet - larger sizes has to be split
-static uint16_t ep0_pending[2];     // Index determines direction as tusb_dir_t type
+static uint16_t ep0_pending[2];                   // Index determines direction as tusb_dir_t type
+
+// TX FIFO RAM allocation so far in words - RX FIFO size is readily available from usb_otg->GRXFSIZ
+static uint16_t _allocated_fifo_words_tx;         // TX FIFO size in words (IN EPs)
+static bool _out_ep_closed;                       // Flag to check if RX FIFO size needs an update (reduce its size)
 
-// FIFO RAM allocation so far in words
-static uint16_t _allocated_fifo_words;
+// Calculate the RX FIFO size according to recommendations from reference manual
+static inline uint16_t calc_rx_ff_size(uint16_t ep_size)
+{
+  return 15 + 2*(ep_size/4) + 2*EP_MAX;
+}
+
+static void update_grxfsiz(uint8_t rhport)
+{
+  (void) rhport;
+
+  USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
+
+  // Determine largest EP size for RX FIFO
+  uint16_t max_epsize = 0;
+  for (uint8_t epnum = 0; epnum < EP_MAX; epnum++)
+  {
+    max_epsize = tu_max16(max_epsize, xfer_status[epnum][TUSB_DIR_OUT].max_size);
+  }
+
+  // Update size of RX FIFO
+  usb_otg->GRXFSIZ = calc_rx_ff_size(max_epsize);
+}
 
 // Setup the control endpoint 0.
 static void bus_reset(uint8_t rhport)
@@ -172,6 +188,7 @@ static void bus_reset(uint8_t rhport)
   USB_OTG_INEndpointTypeDef * in_ep = IN_EP_BASE(rhport);
 
   tu_memclr(xfer_status, sizeof(xfer_status));
+  _out_ep_closed = false;
 
   for(uint8_t n = 0; n < EP_MAX; n++) {
     out_ep[n].DOEPCTL |= USB_OTG_DOEPCTL_SNAK;
@@ -184,16 +201,28 @@ static void bus_reset(uint8_t rhport)
   // "USB Data FIFOs" section in reference manual
   // Peripheral FIFO architecture
   //
+  // The FIFO is split up in a lower part where the RX FIFO is located and an upper part where the TX FIFOs start.
+  // We do this to allow the RX FIFO to grow dynamically which is possible since the free space is located
+  // between the RX and TX FIFOs. This is required by ISO OUT EPs which need a bigger FIFO than the standard
+  // configuration done below.
+  //
+  // Dynamically FIFO sizes are of interest only for ISO EPs since all others are usually not opened and closed.
+  // All EPs other than ISO are opened as soon as the driver starts up i.e. when the host sends a
+  // configure interface command. Hence, all IN EPs other the ISO will be located at the top. IN ISO EPs are usually
+  // opened when the host sends an additional command: setInterface. At this point in time
+  // the ISO EP will be located next to the free space and can change its size. In case more IN EPs change its size
+  // an additional memory
+  //
   // --------------- 320 or 1024 ( 1280 or 4096 bytes )
+  // | IN FIFO 0   |
+  // --------------- (320 or 1024) - 16
+  // | IN FIFO 1   |
+  // --------------- (320 or 1024) - 16 - x
+  // |   . . . .   |
+  // --------------- (320 or 1024) - 16 - x - y - ... - z
   // | IN FIFO MAX |
   // ---------------
-  // |    ...      |
-  // --------------- y + x + 16 + GRXFSIZ
-  // | IN FIFO 2   |
-  // --------------- x + 16 + GRXFSIZ
-  // | IN FIFO 1   |
-  // --------------- 16 + GRXFSIZ
-  // | IN FIFO 0   |
+  // |    FREE     |
   // --------------- GRXFSIZ
   // | OUT FIFO    |
   // | ( Shared )  |
@@ -215,24 +244,16 @@ static void bus_reset(uint8_t rhport)
   //   NOTE: Largest-EPsize & EPOUTnum is actual used endpoints in configuration. Since DCD has no knowledge
   //   of the overall picture yet. We will use the worst scenario: largest possible + EP_MAX
   //
-  //   FIXME: for Isochronous, largest EP size can be 1023/1024 for FS/HS respectively. In addition if multiple ISO
+  //   For Isochronous, largest EP size can be 1023/1024 for FS/HS respectively. In addition if multiple ISO
   //   are enabled at least "2 x (Largest-EPsize/4) + 1" are recommended.  Maybe provide a macro for application to
   //   overwrite this.
 
-#if TUD_OPT_HIGH_SPEED
-  _allocated_fifo_words = 271 + 2*EP_MAX;
-#else
-  _allocated_fifo_words =  47 + 2*EP_MAX;
-#endif
+  usb_otg->GRXFSIZ = calc_rx_ff_size(TUD_OPT_HIGH_SPEED ? 512 : 64);
 
-  usb_otg->GRXFSIZ = _allocated_fifo_words;
+  _allocated_fifo_words_tx = 16;
 
   // Control IN uses FIFO 0 with 64 bytes ( 16 32-bit word )
-  usb_otg->DIEPTXF0_HNPTXFSIZ = (16 << USB_OTG_TX0FD_Pos) | _allocated_fifo_words;
-
-  _allocated_fifo_words += 16;
-
-  // TU_LOG2_INT(_allocated_fifo_words);
+  usb_otg->DIEPTXF0_HNPTXFSIZ = (16 << USB_OTG_TX0FD_Pos) | (EP_FIFO_SIZE/4 - _allocated_fifo_words_tx);
 
   // Fixed control EP0 size to 64 bytes
   in_ep[0].DIEPCTL &= ~(0x03 << USB_OTG_DIEPCTL_MPSIZ_Pos);
@@ -536,6 +557,8 @@ void dcd_disconnect(uint8_t rhport)
 
 bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
 {
+  (void) rhport;
+
   USB_OTG_GlobalTypeDef * usb_otg = GLOBAL_BASE(rhport);
   USB_OTG_DeviceTypeDef * dev = DEVICE_BASE(rhport);
   USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE(rhport);
@@ -546,21 +569,26 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
 
   TU_ASSERT(epnum < EP_MAX);
 
-  if (desc_edpt->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS)
-  {
-    TU_ASSERT(desc_edpt->wMaxPacketSize.size <= (get_speed(rhport) == TUSB_SPEED_HIGH ? 1024 : 1023));
-  }
-  else
-  {
-    TU_ASSERT(desc_edpt->wMaxPacketSize.size <= (get_speed(rhport) == TUSB_SPEED_HIGH ? 512 : 64));
-  }
-
   xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
   xfer->max_size = desc_edpt->wMaxPacketSize.size;
   xfer->interval = desc_edpt->bInterval;
 
+  uint16_t const fifo_size = (desc_edpt->wMaxPacketSize.size + 3) / 4; // Round up to next full word
+
   if(dir == TUSB_DIR_OUT)
   {
+    // Calculate required size of RX FIFO
+    uint16_t const sz = calc_rx_ff_size(4*fifo_size);
+
+    // If size_rx needs to be extended check if possible and if so enlarge it
+    if (usb_otg->GRXFSIZ < sz)
+    {
+      TU_ASSERT(sz + _allocated_fifo_words_tx <= EP_FIFO_SIZE/4);
+
+      // Enlarge RX FIFO
+      usb_otg->GRXFSIZ = sz;
+    }
+
     out_ep[epnum].DOEPCTL |= (1 << USB_OTG_DOEPCTL_USBAEP_Pos) |
         (desc_edpt->bmAttributes.xfer << USB_OTG_DOEPCTL_EPTYP_Pos) |
         (desc_edpt->wMaxPacketSize.size << USB_OTG_DOEPCTL_MPSIZ_Pos);
@@ -573,15 +601,15 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
     // Peripheral FIFO architecture
     //
     // --------------- 320 or 1024 ( 1280 or 4096 bytes )
+    // | IN FIFO 0   |
+    // --------------- (320 or 1024) - 16
+    // | IN FIFO 1   |
+    // --------------- (320 or 1024) - 16 - x
+    // |   . . . .   |
+    // --------------- (320 or 1024) - 16 - x - y - ... - z
     // | IN FIFO MAX |
     // ---------------
-    // |    ...      |
-    // --------------- y + x + 16 + GRXFSIZ
-    // | IN FIFO 2   |
-    // --------------- x + 16 + GRXFSIZ
-    // | IN FIFO 1   |
-    // --------------- 16 + GRXFSIZ
-    // | IN FIFO 0   |
+    // |    FREE     |
     // --------------- GRXFSIZ
     // | OUT FIFO    |
     // | ( Shared )  |
@@ -589,34 +617,15 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
     //
     // In FIFO is allocated by following rules:
     // - IN EP 1 gets FIFO 1, IN EP "n" gets FIFO "n".
-    // - Offset: allocated so far
-    // - Size
-    //    - Interrupt is EPSize
-    //    - Bulk/ISO is max(EPSize, remaining-fifo / non-opened-EPIN)
-
-    uint16_t const fifo_remaining = EP_FIFO_SIZE/4 - _allocated_fifo_words;
-    uint16_t fifo_size = (desc_edpt->wMaxPacketSize.size + 3) / 4;  // +3 for rounding up to next full word
-
-    if ( desc_edpt->bmAttributes.xfer != TUSB_XFER_INTERRUPT )
-    {
-      uint8_t opened = 0;
-      for(uint8_t i = 0; i < EP_MAX; i++)
-      {
-        if ( (i != epnum) && (xfer_status[i][TUSB_DIR_IN].max_size > 0) ) opened++;
-      }
 
-      // EP Size or equally divided of remaining whichever is larger
-      fifo_size = tu_max16(fifo_size, fifo_remaining / (EP_MAX - opened));
-    }
+    // Check if free space is available
+    TU_ASSERT(_allocated_fifo_words_tx + fifo_size + usb_otg->GRXFSIZ <= EP_FIFO_SIZE/4);
 
-    // FIFO overflows, we probably need a better allocating scheme
-    TU_ASSERT(fifo_size <= fifo_remaining);
+    _allocated_fifo_words_tx += fifo_size;
 
     // DIEPTXF starts at FIFO #1.
     // Both TXFD and TXSA are in unit of 32-bit words.
-    usb_otg->DIEPTXF[epnum - 1] = (fifo_size << USB_OTG_DIEPTXF_INEPTXFD_Pos) | _allocated_fifo_words;
-
-    _allocated_fifo_words += fifo_size;
+    usb_otg->DIEPTXF[epnum - 1] = (fifo_size << USB_OTG_DIEPTXF_INEPTXFD_Pos) | (EP_FIFO_SIZE/4 - _allocated_fifo_words_tx);
 
     in_ep[epnum].DIEPCTL |= (1 << USB_OTG_DIEPCTL_USBAEP_Pos) |
         (epnum << USB_OTG_DIEPCTL_TXFNUM_Pos) |
@@ -758,13 +767,21 @@ void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr)
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
   dcd_edpt_disable(rhport, ep_addr, false);
+
+  // Update max_size
+  xfer_status[epnum][dir].max_size = 0;  // max_size = 0 marks a disabled EP - required for changing FIFO allocation
+
   if (dir == TUSB_DIR_IN)
   {
     uint16_t const fifo_size = (usb_otg->DIEPTXF[epnum - 1] & USB_OTG_DIEPTXF_INEPTXFD_Msk) >> USB_OTG_DIEPTXF_INEPTXFD_Pos;
     uint16_t const fifo_start = (usb_otg->DIEPTXF[epnum - 1] & USB_OTG_DIEPTXF_INEPTXSA_Msk) >> USB_OTG_DIEPTXF_INEPTXSA_Pos;
-    // For now only endpoint that has FIFO at the end of FIFO memory can be closed without fuss.
-    TU_ASSERT(fifo_start + fifo_size == _allocated_fifo_words,);
-    _allocated_fifo_words -= fifo_size;
+    // For now only the last opened endpoint can be closed without fuss.
+    TU_ASSERT(fifo_start == EP_FIFO_SIZE/4 - _allocated_fifo_words_tx,);
+    _allocated_fifo_words_tx -= fifo_size;
+  }
+  else
+  {
+    _out_ep_closed = true;     // Set flag such that RX FIFO gets reduced in size once RX FIFO is empty
   }
 }
 
@@ -1025,13 +1042,15 @@ void dcd_int_handler(uint8_t rhport)
 
   uint32_t int_status = usb_otg->GINTSTS;
 
-  if(int_status & USB_OTG_GINTSTS_USBRST) {
+  if(int_status & USB_OTG_GINTSTS_USBRST)
+  {
     // USBRST is start of reset.
     usb_otg->GINTSTS = USB_OTG_GINTSTS_USBRST;
     bus_reset(rhport);
   }
 
-  if(int_status & USB_OTG_GINTSTS_ENUMDNE) {
+  if(int_status & USB_OTG_GINTSTS_ENUMDNE)
+  {
     // ENUMDNE is the end of reset where speed of the link is detected
 
     usb_otg->GINTSTS = USB_OTG_GINTSTS_ENUMDNE;
@@ -1068,45 +1087,59 @@ void dcd_int_handler(uint8_t rhport)
   }
 
 #if USE_SOF
-  if(int_status & USB_OTG_GINTSTS_SOF) {
+  if(int_status & USB_OTG_GINTSTS_SOF)
+  {
     usb_otg->GINTSTS = USB_OTG_GINTSTS_SOF;
     dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true);
   }
 #endif
 
   // RxFIFO non-empty interrupt handling.
-  if(int_status & USB_OTG_GINTSTS_RXFLVL) {
+  if(int_status & USB_OTG_GINTSTS_RXFLVL)
+  {
     // RXFLVL bit is read-only
 
     // Mask out RXFLVL while reading data from FIFO
     usb_otg->GINTMSK &= ~USB_OTG_GINTMSK_RXFLVLM;
 
     // Loop until all available packets were handled
-    do {
+    do
+    {
       handle_rxflvl_ints(rhport, out_ep);
       int_status = usb_otg->GINTSTS;
     } while(int_status & USB_OTG_GINTSTS_RXFLVL);
 
+    // Manage RX FIFO size
+    if (_out_ep_closed)
+    {
+      update_grxfsiz(rhport);
+
+      // Disable flag
+      _out_ep_closed = false;
+    }
+
     usb_otg->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
   }
 
   // OUT endpoint interrupt handling.
-  if(int_status & USB_OTG_GINTSTS_OEPINT) {
+  if(int_status & USB_OTG_GINTSTS_OEPINT)
+  {
     // OEPINT is read-only
     handle_epout_ints(rhport, dev, out_ep);
   }
 
   // IN endpoint interrupt handling.
-  if(int_status & USB_OTG_GINTSTS_IEPINT) {
+  if(int_status & USB_OTG_GINTSTS_IEPINT)
+  {
     // IEPINT bit read-only
     handle_epin_ints(rhport, dev, in_ep);
   }
 
-//  // Check for Incomplete isochronous IN transfer
-//  if(int_status & USB_OTG_GINTSTS_IISOIXFR) {
-//    printf("      IISOIXFR!\r\n");
-////    TU_LOG2("      IISOIXFR!\r\n");
-//  }
+  //  // Check for Incomplete isochronous IN transfer
+  //  if(int_status & USB_OTG_GINTSTS_IISOIXFR) {
+  //    printf("      IISOIXFR!\r\n");
+  ////    TU_LOG2("      IISOIXFR!\r\n");
+  //  }
 }
 
 #endif
diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c
index ad71e1168..e08c3536a 100644
--- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c
+++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c
@@ -232,9 +232,9 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir   = tu_edpt_dir(desc_edpt->bEndpointAddress);
 
-  // Unsupported endpoint numbers/size or type (Iso not supported. Control
+  // Unsupported endpoint numbers or type (Iso not supported. Control
   // not supported on nonzero endpoints).
-  if((desc_edpt->wMaxPacketSize.size > 64) || (epnum > 7) || \
+  if( (epnum > 7) || \
       (desc_edpt->bmAttributes.xfer == 0) || \
       (desc_edpt->bmAttributes.xfer == 1)) {
     return false;
@@ -572,7 +572,7 @@ void dcd_int_handler(uint8_t rhport)
   {
     case USBVECINT_RSTR:
       bus_reset();
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
       break;
 
     // Clear the (hardware-enforced) NAK on EP 0 after a SETUP packet
diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c
index d670dd38e..b68f04faa 100644
--- a/src/portable/valentyusb/eptri/dcd_eptri.c
+++ b/src/portable/valentyusb/eptri/dcd_eptri.c
@@ -332,7 +332,7 @@ static void dcd_reset(void)
   usb_out_ev_enable_write(1);
   usb_setup_ev_enable_write(3);
 
-  dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+  dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
 }
 
 // Initializes the USB peripheral for device mode and enables it.
diff --git a/src/tusb_option.h b/src/tusb_option.h
index 71ea7692b..65a06bfa7 100644
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@@ -151,22 +151,22 @@
   #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE
 #endif
 
-#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST  ) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST  )) || \
-    ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE))
+#if (((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST  ) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST  )) || \
+    (((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE))
   #error "TinyUSB currently does not support same modes on more than 1 roothub port"
 #endif
 
 // Which roothub port is configured as host
-#define TUH_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) ? 1 : -1) )
+#define TUH_OPT_RHPORT          ( ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST) ? 0 : (((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST) ? 1 : -1) )
 #define TUSB_OPT_HOST_ENABLED   ( TUH_OPT_RHPORT >= 0 )
 
 // Which roothub port is configured as device
-#define TUD_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) ? 1 : -1) )
+#define TUD_OPT_RHPORT          ( ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) ? 0 : (((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE) ? 1 : -1) )
 
 #if TUD_OPT_RHPORT == 0
-#define TUD_OPT_HIGH_SPEED      ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED )
+#define TUD_OPT_HIGH_SPEED      ( (CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HIGH_SPEED )
 #else
-#define TUD_OPT_HIGH_SPEED      ( CFG_TUSB_RHPORT1_MODE & OPT_MODE_HIGH_SPEED )
+#define TUD_OPT_HIGH_SPEED      ( (CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HIGH_SPEED )
 #endif
 
 #define TUSB_OPT_DEVICE_ENABLED ( TUD_OPT_RHPORT >= 0 )
diff --git a/test/test/device/msc/test_msc_device.c b/test/test/device/msc/test_msc_device.c
index a01ef153a..00bb86ccf 100644
--- a/test/test/device/msc/test_msc_device.c
+++ b/test/test/device/msc/test_msc_device.c
@@ -202,7 +202,7 @@ void setUp(void)
     tusb_init();
   }
 
-  dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, false);
+  dcd_event_bus_reset(rhport, TUSB_SPEED_HIGH, false);
   tud_task();
 }
 
diff --git a/test/test/support/tusb_config.h b/test/test/support/tusb_config.h
index 8cd99eaae..d80e144da 100644
--- a/test/test/support/tusb_config.h
+++ b/test/test/support/tusb_config.h
@@ -86,8 +86,8 @@
 //------------- CDC -------------//
 
 // FIFO size of CDC TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE   64
-#define CFG_TUD_CDC_TX_BUFSIZE   64
+#define CFG_TUD_CDC_RX_BUFSIZE   512
+#define CFG_TUD_CDC_TX_BUFSIZE   512
 
 //------------- MSC -------------//
 
@@ -97,7 +97,7 @@
 //------------- HID -------------//
 
 // Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    16
+#define CFG_TUD_HID_EP_BUFSIZE    64
 
 #ifdef __cplusplus
  }