Enable UART debugging on F070.

2 files changed, 42 insertions, 6 deletions

diff --git a/hw/bsp/stm32f070rbnucleo/stm32f070rbnucleo.c b/hw/bsp/stm32f070rbnucleo/stm32f070rbnucleo.c
index e51eda927..084d9a92d 100644
--- a/hw/bsp/stm32f070rbnucleo/stm32f070rbnucleo.c
+++ b/hw/bsp/stm32f070rbnucleo/stm32f070rbnucleo.c
@@ -37,6 +37,24 @@
 #define BUTTON_PIN            GPIO_PIN_13
 #define BUTTON_STATE_ACTIVE   0
 
+#define UARTx                 USART2
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF1_USART2
+#define UART_TX_PIN           GPIO_PIN_2
+#define UART_RX_PIN           GPIO_PIN_3
+
+UART_HandleTypeDef UartHandle;
+
+ // enable all LED, Button, Uart, USB clock
+static void all_rcc_clk_enable(void)
+{
+  __HAL_RCC_GPIOA_CLK_ENABLE();  // USB D+, D-
+  __HAL_RCC_GPIOC_CLK_ENABLE();  // LED
+  //__HAL_RCC_GPIOA_CLK_ENABLE();  // Button
+  //__HAL_RCC_GPIOA_CLK_ENABLE();  // Uart tx, rx
+  __HAL_RCC_USART2_CLK_ENABLE(); // Uart module
+}
+
 void board_init(void)
 {
   #if CFG_TUSB_OS  == OPT_OS_NONE
@@ -74,8 +92,9 @@ void board_init(void)
   // Notify runtime of frequency change.
   SystemCoreClockUpdate();
 
+  all_rcc_clk_enable();
+
   // LED
-  __HAL_RCC_GPIOA_CLK_ENABLE();
   GPIO_InitTypeDef  GPIO_InitStruct;
   GPIO_InitStruct.Pin = LED_PIN;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
@@ -84,13 +103,30 @@ void board_init(void)
   HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
 
   // Button
-  __HAL_RCC_GPIOC_CLK_ENABLE();
   GPIO_InitStruct.Pin = BUTTON_PIN;
   GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
   GPIO_InitStruct.Pull = GPIO_PULLDOWN;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
 
+  // Uart
+  GPIO_InitStruct.Pin       = UART_TX_PIN | UART_RX_PIN;
+  GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull      = GPIO_PULLUP;
+  GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = UART_GPIO_AF;
+  HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct);
+
+  UartHandle.Instance        = UARTx;
+  UartHandle.Init.BaudRate   = CFG_BOARD_UART_BAUDRATE;
+  UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
+  UartHandle.Init.StopBits   = UART_STOPBITS_1;
+  UartHandle.Init.Parity     = UART_PARITY_NONE;
+  UartHandle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
+  UartHandle.Init.Mode       = UART_MODE_TX_RX;
+  UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
+  HAL_UART_Init(&UartHandle);
+
   // Start USB clock
   __HAL_RCC_USB_CLK_ENABLE();
 }
@@ -117,8 +153,8 @@ int board_uart_read(uint8_t* buf, int len)
 
 int board_uart_write(void const * buf, int len)
 {
-  (void) buf; (void) len;
-  return 0;
+  HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff);
+  return len;
 }
 
 #if CFG_TUSB_OS  == OPT_OS_NONE
diff --git a/hw/bsp/stm32f070rbnucleo/stm32f0xx_hal_conf.h b/hw/bsp/stm32f070rbnucleo/stm32f0xx_hal_conf.h
index 7e3721afc..45fa015f5 100644
--- a/hw/bsp/stm32f070rbnucleo/stm32f0xx_hal_conf.h
+++ b/hw/bsp/stm32f070rbnucleo/stm32f0xx_hal_conf.h
@@ -66,8 +66,8 @@
 /*#define HAL_RTC_MODULE_ENABLED   */
 /*#define HAL_SPI_MODULE_ENABLED   */
 /*#define HAL_TIM_MODULE_ENABLED   */
-/*#define HAL_UART_MODULE_ENABLED   */
-#define HAL_USART_MODULE_ENABLED   
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
 /*#define HAL_IRDA_MODULE_ENABLED   */
 /*#define HAL_SMARTCARD_MODULE_ENABLED   */
 /*#define HAL_SMBUS_MODULE_ENABLED   */