dcd: sam7x: rename family dcd to include the whole family

Signed-off-by: Rafael Silva <[email protected]>

7 files changed, 10 insertions, 9 deletions

diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h
index 45167da8e..19b6925bc 100644
--- a/examples/device/cdc_dual_ports/src/tusb_config.h
+++ b/examples/device/cdc_dual_ports/src/tusb_config.h
@@ -48,7 +48,7 @@
 // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
 #ifndef BOARD_DEVICE_RHPORT_SPEED
   #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAME70)
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAM7X)
     #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
   #else
     #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c
index e39c140cc..f1f71a778 100644
--- a/examples/device/cdc_dual_ports/src/usb_descriptors.c
+++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c
@@ -94,7 +94,7 @@ enum
   #define EPNUM_CDC_1_OUT     0x05
   #define EPNUM_CDC_1_IN      0x85
 
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU ==  OPT_MCU_SAME70
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU ==  OPT_MCU_SAM7X
   // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
   //    e.g EP1 OUT & EP1 IN cannot exist together
   #define EPNUM_CDC_0_NOTIF   0x81
diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h
index f9e98b0f7..950f3c421 100644
--- a/examples/device/cdc_msc/src/tusb_config.h
+++ b/examples/device/cdc_msc/src/tusb_config.h
@@ -48,7 +48,7 @@
 // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
 #ifndef BOARD_DEVICE_RHPORT_SPEED
   #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAME70)
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAM7X)
     #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
   #else
     #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c
index 46b57f7e2..6ac34e859 100644
--- a/examples/device/cdc_msc/src/usb_descriptors.c
+++ b/examples/device/cdc_msc/src/usb_descriptors.c
@@ -94,7 +94,7 @@ enum
   #define EPNUM_MSC_OUT     0x05
   #define EPNUM_MSC_IN      0x85
 
-#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAME70
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAM7X
   // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
   //    e.g EP1 OUT & EP1 IN cannot exist together
   #define EPNUM_CDC_NOTIF   0x81
diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk
index 13c552f98..031b536b2 100644
--- a/hw/bsp/same70_xplained/board.mk
+++ b/hw/bsp/same70_xplained/board.mk
@@ -8,7 +8,7 @@ CFLAGS += \
   -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles \
   -D__SAME70Q21B__ \
-  -DCFG_TUSB_MCU=OPT_MCU_SAME70
+  -DCFG_TUSB_MCU=OPT_MCU_SAM7X
 
 # suppress following warnings from mcu driver
 CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align
@@ -19,7 +19,7 @@ ASF_DIR = hw/mcu/microchip/same70
 LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld
 
 SRC_C += \
-	src/portable/microchip/same70/dcd_same70.c \
+	src/portable/microchip/sam7x/dcd_sam7x.c \
 	$(ASF_DIR)/same70b/gcc/gcc/startup_same70q21b.c \
 	$(ASF_DIR)/same70b/gcc/system_same70q21b.c \
 	$(ASF_DIR)/hpl/core/hpl_init.c \
diff --git a/src/portable/microchip/same70/dcd_same70.c b/src/portable/microchip/sam7x/dcd_sam7x.c
index 0ad9ad625..53ea796b4 100644
--- a/src/portable/microchip/same70/dcd_same70.c
+++ b/src/portable/microchip/sam7x/dcd_sam7x.c
@@ -27,7 +27,7 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_SAME70
+#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_SAM7X
 
 #include "device/dcd.h"
 
@@ -43,7 +43,7 @@
 #endif
 
 // Dual bank can imporve performance, but need 2 times bigger packet buffer
-// As SAME70 has only 4KB packet buffer, use with caution !
+// As SAM7x has only 4KB packet buffer, use with caution !
 // Enable in FS mode as packets are smaller
 #ifndef USE_DUAL_BANK
 #  if TUD_OPT_HIGH_SPEED
diff --git a/src/tusb_option.h b/src/tusb_option.h
index fb86d7f9c..2e1678ccf 100644
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@@ -61,7 +61,8 @@
 #define OPT_MCU_SAME5X            203 ///< MicroChip SAM E5x
 #define OPT_MCU_SAMD11            204 ///< MicroChip SAMD11
 #define OPT_MCU_SAML22            205 ///< MicroChip SAML22
-#define OPT_MCU_SAME70            206 ///< MicroChip SAME70 series
+#define OPT_MCU_SAM7X             206 ///< MicroChip SAME70, S70, V70, V71 family
+
 
 // STM32
 #define OPT_MCU_STM32F0           300 ///< ST STM32F0