Merge pull request #2373 from Lurcy38/master

Add Support stm32h5 for stm32h573i based on stm32_fsdev G0 implementa…

23 files changed, 1653 insertions, 17 deletions

diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml
index 1a99d407f..44ada917f 100644
--- a/.github/workflows/cmake_arm.yml
+++ b/.github/workflows/cmake_arm.yml
@@ -49,6 +49,7 @@ jobs:
           - 'stm32f7'
           - 'stm32g0'
           - 'stm32g4'
+          - 'stm32h5'
           - 'stm32h7'
           - 'stm32l4'
           - 'stm32u5'
diff --git a/.idea/cmake.xml b/.idea/cmake.xml
index 101f08078..d12e44789 100644
--- a/.idea/cmake.xml
+++ b/.idea/cmake.xml
@@ -62,6 +62,7 @@
       <configuration PROFILE_NAME="stm32f103_mini_2" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f103_mini_2" />
       <configuration PROFILE_NAME="stm32f411disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f411disco -DLOG=2 -DLOGGER=RTT" />
       <configuration PROFILE_NAME="stm32f769disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32f769disco -DLOG=3 -DLOGGER=RTT" />
+      <configuration PROFILE_NAME="stm32h563nucleo" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h563nucleo -DLOG=3 -DLOGGER=RTT -DTRACE_ETM=1" />
       <configuration PROFILE_NAME="stm32h743eval" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743eval -DLOG=3 -DLOGGER=RTT -DTRACE_ETM=1" />
       <configuration PROFILE_NAME="stm32h743nucleo" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32h743nucleo -DLOG=3" />
       <configuration PROFILE_NAME="stm32l476disco" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32l476disco" />
diff --git a/.idea/runConfigurations/stlink.xml b/.idea/runConfigurations/stlink.xml
index 92d94a80e..babb8b463 100644
--- a/.idea/runConfigurations/stlink.xml
+++ b/.idea/runConfigurations/stlink.xml
@@ -1,6 +1,6 @@
 <component name="ProjectRunConfigurationManager">
-  <configuration default="false" name="stlink" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-p 62847 -cp &quot;/opt/st/stm32cubeide_1.12.1/plugins/com.st.stm32cube.ide.mcu.externaltools.cubeprogrammer.linux64_2.0.600.202301161003/tools/bin&quot; --frequency 24000 --swd" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="cdc_msc" TARGET_NAME="cdc_msc" version="1" RUN_TARGET_PROJECT_NAME="cdc_msc" RUN_TARGET_NAME="cdc_msc">
-    <custom-gdb-server version="1" gdb-connect="tcp::62847" executable="/opt/st/stm32cubeide_1.12.1/plugins/com.st.stm32cube.ide.mcu.externaltools.stlink-gdb-server.linux64_2.0.500.202301161003/tools/bin/ST-LINK_gdbserver" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD">
+  <configuration default="false" name="stlink" type="com.jetbrains.cidr.embedded.customgdbserver.type" factoryName="com.jetbrains.cidr.embedded.customgdbserver.factory" folderName="stm32" PROGRAM_PARAMS="-p 28833 -cp &quot;/opt/st/stm32cubeide_1.12.1/plugins/com.st.stm32cube.ide.mcu.externaltools.cubeprogrammer.linux64_2.1.100.202311100844/tools/bin&quot; --frequency 8000 --swd" REDIRECT_INPUT="false" ELEVATE="false" USE_EXTERNAL_CONSOLE="false" EMULATE_TERMINAL="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="tinyusb_examples" TARGET_NAME="cdc_msc" CONFIG_NAME="stm32h563nucleo" version="1" RUN_TARGET_PROJECT_NAME="tinyusb_examples" RUN_TARGET_NAME="cdc_msc">
+    <custom-gdb-server version="1" gdb-connect="tcp::28833" executable="/opt/st/stm32cubeide_1.12.1/plugins/com.st.stm32cube.ide.mcu.externaltools.stlink-gdb-server.linux64_2.1.100.202310302101/tools/bin/ST-LINK_gdbserver" warmup-ms="0" download-type="ALWAYS" reset-cmd="monitor reset" reset-type="AFTER_DOWNLOAD">
       <debugger kind="GDB" isBundled="true" />
     </custom-gdb-server>
     <method v="2">
diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h
index 4ce5c4139..d40f33bbe 100644
--- a/hw/bsp/board_mcu.h
+++ b/hw/bsp/board_mcu.h
@@ -40,8 +40,8 @@
 
 // Include order follows OPT_MCU_ number
 #if   TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) || \
-      TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC18XX)  || \
-      TU_CHECK_MCU(OPT_MCU_LPC40XX, OPT_MCU_LPC43XX)
+  TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC18XX)  || \
+  TU_CHECK_MCU(OPT_MCU_LPC40XX, OPT_MCU_LPC43XX)
   #include "chip.h"
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX, OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX, OPT_MCU_MCXN9)
@@ -54,8 +54,8 @@
   #include "nrf.h"
 
 #elif CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \
-      CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X || \
-      CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21
+  CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X || \
+  CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21
   #include "sam.h"
 
 #elif CFG_TUSB_MCU == OPT_MCU_SAMG
@@ -83,6 +83,9 @@
 #elif CFG_TUSB_MCU == OPT_MCU_STM32G4
   #include "stm32g4xx.h"
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32H5
+  #include "stm32h5xx.h"
+
 #elif CFG_TUSB_MCU == OPT_MCU_STM32H7
   #include "stm32h7xx.h"
 
diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h
index ae0820529..9ebaf73f0 100644
--- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h
+++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h
@@ -2,7 +2,7 @@
  * The MIT License (MIT)
  *
  * Copyright (c) 2020, Ha Thach (tinyusb.org)
- * Copyright (c) 2034, HiFiPhile
+ * Copyright (c) 2023, HiFiPhile
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk
index 4b0c6922d..95cd84dbd 100644
--- a/hw/bsp/stm32g4/family.mk
+++ b/hw/bsp/stm32g4/family.mk
@@ -1,7 +1,5 @@
 UF2_FAMILY_ID = 0x4c71240a
 ST_FAMILY = g4
-DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
-
 ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
diff --git a/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..34398c448
--- /dev/null
+++ b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32h5xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+#define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+#define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       4
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY       ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY  2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY               ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY          ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.cmake b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.cmake
new file mode 100644
index 000000000..694ea41cd
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.cmake
@@ -0,0 +1,8 @@
+set(MCU_VARIANT stm32h563xx)
+set(JLINK_DEVICE stm32h563zi)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32H563xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h
new file mode 100644
index 000000000..8e849f5c8
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h
@@ -0,0 +1,129 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ * Copyright (c) 2023, HiFiPhile
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOG
+#define LED_PIN               GPIO_PIN_4
+#define LED_STATE_ON          1
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PIN_0
+#define BUTTON_STATE_ACTIVE   0
+
+// UART Enable for STLink VCOM
+#define UART_DEV              USART1
+#define UART_CLK_EN           __USART1_CLK_ENABLE
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF7_USART1
+
+#define UART_TX_PIN           GPIO_PIN_9
+#define UART_RX_PIN           GPIO_PIN_10
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage
+  */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48|RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIGITAL;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLL1_SOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 4;
+  RCC_OscInitStruct.PLL.PLLN = 250;
+  RCC_OscInitStruct.PLL.PLLP = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 2;
+  RCC_OscInitStruct.PLL.PLLR = 2;
+  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1_VCIRANGE_1;
+  RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1_VCORANGE_WIDE;
+  RCC_OscInitStruct.PLL.PLLFRACN = 0;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                                |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
+                                |RCC_CLOCKTYPE_PCLK3;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB3CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  // Configure CRS clock source
+  __HAL_RCC_CRS_CLK_ENABLE();
+  RCC_CRSInitTypeDef RCC_CRSInitStruct = {0};
+  RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
+  RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
+  RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING;
+  RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000);
+  RCC_CRSInitStruct.ErrorLimitValue = 34;
+  RCC_CRSInitStruct.HSI48CalibrationValue = 32;
+  HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
+
+  /* Select HSI48 as USB clock source */
+  RCC_PeriphCLKInitTypeDef usb_clk = {0 };
+  usb_clk.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  usb_clk.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+  HAL_RCCEx_PeriphCLKConfig(&usb_clk);
+
+  /* Peripheral clock enable */
+  __HAL_RCC_USB_CLK_ENABLE();
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.mk b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.mk
new file mode 100644
index 000000000..091d1e5e3
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.mk
@@ -0,0 +1,7 @@
+MCU_VARIANT = stm32h563xx
+
+CFLAGS += \
+	-DSTM32H563xx
+
+# For flash-jlink target
+JLINK_DEVICE = stm32h563zi
diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/cubemx/stm32h563nucleo.ioc b/hw/bsp/stm32h5/boards/stm32h563nucleo/cubemx/stm32h563nucleo.ioc
new file mode 100644
index 000000000..3c83d136d
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/cubemx/stm32h563nucleo.ioc
@@ -0,0 +1,401 @@
+#MicroXplorer Configuration settings - do not modify
+BOOTPATH.BootPathName=LEGACY
+BOOTPATH.IPParameters=BootPathName
+BOOTPATH.UserSelectedBootPath=LEGACY
+CAD.formats=
+CAD.pinconfig=
+CAD.provider=
+CORTEX_M33_NS.userName=CORTEX_M33
+File.Version=6
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=false
+MMTAppRegionsCount=0
+MMTConfigApplied=false
+Mcu.CPN=STM32H563ZIT6
+Mcu.ContextProject=TrustZoneDisabled
+Mcu.Family=STM32H5
+Mcu.IP0=BOOTPATH
+Mcu.IP1=CORTEX_M33_NS
+Mcu.IP2=DEBUG
+Mcu.IP3=ICACHE
+Mcu.IP4=MEMORYMAP
+Mcu.IP5=NVIC
+Mcu.IP6=PWR
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=USB
+Mcu.IPNb=10
+Mcu.Name=STM32H563ZITx
+Mcu.Package=LQFP144
+Mcu.Pin0=PE2
+Mcu.Pin1=PE3
+Mcu.Pin10=PC1
+Mcu.Pin11=PA1
+Mcu.Pin12=PA2
+Mcu.Pin13=PA4
+Mcu.Pin14=PA7
+Mcu.Pin15=PC4
+Mcu.Pin16=PC5
+Mcu.Pin17=PB0
+Mcu.Pin18=PB13
+Mcu.Pin19=PB14
+Mcu.Pin2=PE4
+Mcu.Pin20=PB15
+Mcu.Pin21=PD8
+Mcu.Pin22=PD9
+Mcu.Pin23=PG4
+Mcu.Pin24=PG7
+Mcu.Pin25=PA9
+Mcu.Pin26=PA11
+Mcu.Pin27=PA12
+Mcu.Pin28=PA13(JTMS/SWDIO)
+Mcu.Pin29=PA14(JTCK/SWCLK)
+Mcu.Pin3=PE5
+Mcu.Pin30=PA15(JTDI)
+Mcu.Pin31=PG11
+Mcu.Pin32=PG13
+Mcu.Pin33=PB3(JTDO/TRACESWO)
+Mcu.Pin34=PB6
+Mcu.Pin35=PB7
+Mcu.Pin36=VP_ICACHE_VS_ICACHE
+Mcu.Pin37=VP_PWR_VS_SECSignals
+Mcu.Pin38=VP_PWR_VS_LPOM
+Mcu.Pin39=VP_PWR_VS_DBSignals
+Mcu.Pin4=PE6
+Mcu.Pin40=VP_SYS_VS_Systick
+Mcu.Pin41=VP_BOOTPATH_VS_BOOTPATH
+Mcu.Pin42=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin5=PC13
+Mcu.Pin6=PC14-OSC32_IN(OSC32_IN)
+Mcu.Pin7=PC15-OSC32_OUT(OSC32_OUT)
+Mcu.Pin8=PF4
+Mcu.Pin9=PH0-OSC_IN(PH0)
+Mcu.PinsNb=43
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32H563ZITx
+MxCube.Version=6.10.0
+MxDb.Version=DB.6.0.100
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.EXTI13_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+PA1.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PA1.GPIO_Label=RMII_REF_CLK
+PA1.GPIO_Mode=GPIO_MODE_AF_PP
+PA1.GPIO_PuPd=GPIO_NOPULL
+PA1.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA1.Locked=true
+PA1.Signal=ETH_REF_CLK
+PA11.GPIOParameters=GPIO_Label
+PA11.GPIO_Label=USB_FS_N
+PA11.Locked=true
+PA11.Mode=Device
+PA11.Signal=USB_DM
+PA12.GPIOParameters=GPIO_Label
+PA12.GPIO_Label=USB_FS_P
+PA12.Locked=true
+PA12.Mode=Device
+PA12.Signal=USB_DP
+PA13(JTMS/SWDIO).GPIOParameters=GPIO_Label
+PA13(JTMS/SWDIO).GPIO_Label=SWDIO
+PA13(JTMS/SWDIO).Locked=true
+PA13(JTMS/SWDIO).Mode=Trace_Synchro_4bits_JTAG
+PA13(JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO
+PA14(JTCK/SWCLK).GPIOParameters=GPIO_Label
+PA14(JTCK/SWCLK).GPIO_Label=SWCLK
+PA14(JTCK/SWCLK).Locked=true
+PA14(JTCK/SWCLK).Mode=Trace_Synchro_4bits_JTAG
+PA14(JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK
+PA15(JTDI).GPIOParameters=GPIO_Label
+PA15(JTDI).GPIO_Label=T_JTDI
+PA15(JTDI).Locked=true
+PA15(JTDI).Mode=Trace_Synchro_4bits_JTAG
+PA15(JTDI).Signal=DEBUG_JTDI
+PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PA2.GPIO_Label=RMII_MDIO
+PA2.GPIO_Mode=GPIO_MODE_AF_PP
+PA2.GPIO_PuPd=GPIO_NOPULL
+PA2.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA2.Locked=true
+PA2.Signal=ETH_MDIO
+PA4.GPIOParameters=GPIO_Label
+PA4.GPIO_Label=VBUS_SENSE
+PA4.Locked=true
+PA4.Signal=ADCx_INP18
+PA7.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PA7.GPIO_Label=RMII_CRS_DV
+PA7.GPIO_Mode=GPIO_MODE_AF_PP
+PA7.GPIO_PuPd=GPIO_NOPULL
+PA7.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA7.Locked=true
+PA7.Signal=ETH_CRS_DV
+PA9.GPIOParameters=GPIO_Label
+PA9.GPIO_Label=UCDP_DBn
+PA9.Locked=true
+PA9.Signal=UCPD1_DB1
+PB0.Locked=true
+PB0.Signal=GPIO_Output
+PB13.GPIOParameters=GPIO_Label
+PB13.GPIO_Label=UCPD_CC1
+PB13.Locked=true
+PB13.Signal=UCPD1_CC1
+PB14.GPIOParameters=GPIO_Label
+PB14.GPIO_Label=UCPD_CC2
+PB14.Locked=true
+PB14.Signal=UCPD1_CC2
+PB15.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PB15.GPIO_Label=RMII_TXD1
+PB15.GPIO_Mode=GPIO_MODE_AF_PP
+PB15.GPIO_PuPd=GPIO_NOPULL
+PB15.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PB15.Locked=true
+PB15.Signal=ETH_TXD1
+PB3(JTDO/TRACESWO).GPIOParameters=GPIO_Label
+PB3(JTDO/TRACESWO).GPIO_Label=SWO
+PB3(JTDO/TRACESWO).Locked=true
+PB3(JTDO/TRACESWO).Mode=Trace_Synchro_4bits_JTAG
+PB3(JTDO/TRACESWO).Signal=DEBUG_JTDO-SWO
+PB6.GPIOParameters=GPIO_Label
+PB6.GPIO_Label=ARD_D1_TX
+PB6.Locked=true
+PB6.Signal=LPUART1_TX
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=ARD_D0_RX
+PB7.Locked=true
+PB7.Signal=LPUART1_RX
+PC1.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PC1.GPIO_Label=RMII_MDC
+PC1.GPIO_Mode=GPIO_MODE_AF_PP
+PC1.GPIO_PuPd=GPIO_NOPULL
+PC1.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PC1.Locked=true
+PC1.Signal=ETH_MDC
+PC13.Locked=true
+PC13.Signal=GPXTI13
+PC14-OSC32_IN(OSC32_IN).Locked=true
+PC14-OSC32_IN(OSC32_IN).Mode=LSE-External-Oscillator
+PC14-OSC32_IN(OSC32_IN).Signal=RCC_OSC32_IN
+PC15-OSC32_OUT(OSC32_OUT).Locked=true
+PC15-OSC32_OUT(OSC32_OUT).Mode=LSE-External-Oscillator
+PC15-OSC32_OUT(OSC32_OUT).Signal=RCC_OSC32_OUT
+PC4.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PC4.GPIO_Label=RMII_RXD0
+PC4.GPIO_Mode=GPIO_MODE_AF_PP
+PC4.GPIO_PuPd=GPIO_NOPULL
+PC4.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PC4.Locked=true
+PC4.Signal=ETH_RXD0
+PC5.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PC5.GPIO_Label=RMII_RXD1
+PC5.GPIO_Mode=GPIO_MODE_AF_PP
+PC5.GPIO_PuPd=GPIO_NOPULL
+PC5.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PC5.Locked=true
+PC5.Signal=ETH_RXD1
+PD8.Locked=true
+PD8.Signal=USART3_TX
+PD9.Locked=true
+PD9.Signal=USART3_RX
+PE2.GPIOParameters=GPIO_Label
+PE2.GPIO_Label=TRACE_CK
+PE2.Locked=true
+PE2.Mode=Trace_Synchro_4bits_JTAG
+PE2.Signal=DEBUG_TRACECLK
+PE3.GPIOParameters=GPIO_Label
+PE3.GPIO_Label=TRACE_D0
+PE3.Locked=true
+PE3.Mode=Trace_Synchro_4bits_JTAG
+PE3.Signal=DEBUG_TRACED0
+PE4.GPIOParameters=GPIO_Label
+PE4.GPIO_Label=TRACE_D1
+PE4.Locked=true
+PE4.Mode=Trace_Synchro_4bits_JTAG
+PE4.Signal=DEBUG_TRACED1
+PE5.GPIOParameters=GPIO_Label
+PE5.GPIO_Label=TRACE_D2
+PE5.Locked=true
+PE5.Mode=Trace_Synchro_4bits_JTAG
+PE5.Signal=DEBUG_TRACED2
+PE6.GPIOParameters=GPIO_Label
+PE6.GPIO_Label=TRACE_D3
+PE6.Locked=true
+PE6.Mode=Trace_Synchro_4bits_JTAG
+PE6.Signal=DEBUG_TRACED3
+PF4.Locked=true
+PF4.Signal=GPIO_Output
+PG11.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PG11.GPIO_Label=RMII_TXT_EN
+PG11.GPIO_Mode=GPIO_MODE_AF_PP
+PG11.GPIO_PuPd=GPIO_NOPULL
+PG11.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PG11.Locked=true
+PG11.Signal=ETH_TX_EN
+PG13.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PG13.GPIO_Label=RMI_TXD0
+PG13.GPIO_Mode=GPIO_MODE_AF_PP
+PG13.GPIO_PuPd=GPIO_NOPULL
+PG13.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PG13.Locked=true
+PG13.Signal=ETH_TXD0
+PG4.Locked=true
+PG4.Signal=GPIO_Output
+PG7.GPIOParameters=GPIO_Label
+PG7.GPIO_Label=UCPD_FLT
+PG7.Locked=true
+PG7.Signal=GPXTI7
+PH0-OSC_IN(PH0).GPIOParameters=GPIO_Label
+PH0-OSC_IN(PH0).GPIO_Label=STLK_MCO
+PH0-OSC_IN(PH0).Locked=true
+PH0-OSC_IN(PH0).Mode=HSE-External-Clock-Source
+PH0-OSC_IN(PH0).Signal=RCC_OSC_IN
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32H563ZITx
+ProjectManager.FirmwarePackage=STM32Cube FW_H5 V1.1.1
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=2
+ProjectManager.MainLocation=Core/Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=stm32h563nucleo.ioc
+ProjectManager.ProjectName=stm32h563nucleo
+ProjectManager.ProjectStructure=
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=Makefile
+ProjectManager.ToolChainLocation=
+ProjectManager.UAScriptAfterPath=
+ProjectManager.UAScriptBeforePath=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USB_PCD_Init-USB-false-HAL-true,4-MX_ICACHE_Init-ICACHE-false-HAL-true,0-MX_CORTEX_M33_NS_Init-CORTEX_M33_NS-false-HAL-true,0-MX_PWR_Init-PWR-false-HAL-true
+RCC.ADCFreq_Value=250000000
+RCC.AHBFreq_Value=250000000
+RCC.APB1Freq_Value=250000000
+RCC.APB1TimFreq_Value=250000000
+RCC.APB2Freq_Value=250000000
+RCC.APB2TimFreq_Value=250000000
+RCC.APB3Freq_Value=250000000
+RCC.CECFreq_Value=32000
+RCC.CKPERFreq_Value=64000000
+RCC.CRSFreq_Value=48000000
+RCC.CSI_VALUE=4000000
+RCC.CortexFreq_Value=250000000
+RCC.DACFreq_Value=32768
+RCC.EPOD_VALUE=8000000
+RCC.ETHFreq_Value=250000000
+RCC.FCLKCortexFreq_Value=250000000
+RCC.FDCANFreq_Value=8000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=250000000
+RCC.HSE_VALUE=8000000
+RCC.HSI48_VALUE=48000000
+RCC.HSIDiv=RCC_HSI_DIV1
+RCC.HSI_VALUE=64000000
+RCC.I2C1Freq_Value=250000000
+RCC.I2C2Freq_Value=250000000
+RCC.I2C3Freq_Value=250000000
+RCC.I2C4Freq_Value=250000000
+RCC.I3C1Freq_Value=250000000
+RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,CECFreq_Value,CKPERFreq_Value,CRSFreq_Value,CSI_VALUE,CortexFreq_Value,DACFreq_Value,EPOD_VALUE,ETHFreq_Value,FCLKCortexFreq_Value,FDCANFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSIDiv,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I3C1Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM3Freq_Value,LPTIM4Freq_Value,LPTIM5Freq_Value,LPTIM6Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSIRC_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,OCTOSPIMFreq_Value,PLL2PoutputFreq_Value,PLL2QoutputFreq_Value,PLL2RoutputFreq_Value,PLL3PoutputFreq_Value,PLL3QoutputFreq_Value,PLL3RoutputFreq_Value,PLLM,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMC1Freq_Value,SDMMC2Freq_Value,SPI1Freq_Value,SPI2Freq_Value,SPI3Freq_Value,SPI4Freq_Value,SPI5Freq_Value,SPI6Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART12Freq_Value,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,UART9Freq_Value,UCPD1outputFreq_Value,USART10Freq_Value,USART11Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOPLL2OutputFreq_Value,VCOPLL3OutputFreq_Value
+RCC.LPTIM1Freq_Value=250000000
+RCC.LPTIM2Freq_Value=250000000
+RCC.LPTIM3Freq_Value=250000000
+RCC.LPTIM4Freq_Value=250000000
+RCC.LPTIM5Freq_Value=250000000
+RCC.LPTIM6Freq_Value=250000000
+RCC.LPUART1Freq_Value=250000000
+RCC.LSCOPinFreq_Value=32000
+RCC.LSIRC_VALUE=32000
+RCC.MCO1PinFreq_Value=64000000
+RCC.MCO2PinFreq_Value=250000000
+RCC.OCTOSPIMFreq_Value=250000000
+RCC.PLL2PoutputFreq_Value=258000000
+RCC.PLL2QoutputFreq_Value=258000000
+RCC.PLL2RoutputFreq_Value=258000000
+RCC.PLL3PoutputFreq_Value=258000000
+RCC.PLL3QoutputFreq_Value=258000000
+RCC.PLL3RoutputFreq_Value=258000000
+RCC.PLLM=4
+RCC.PLLN=250
+RCC.PLLPoutputFreq_Value=250000000
+RCC.PLLQoutputFreq_Value=250000000
+RCC.PLLSourceVirtual=RCC_PLL1_SOURCE_HSE
+RCC.PWRFreq_Value=250000000
+RCC.RNGFreq_Value=48000000
+RCC.SAI1Freq_Value=258000000
+RCC.SAI2Freq_Value=258000000
+RCC.SDMMC1Freq_Value=250000000
+RCC.SDMMC2Freq_Value=250000000
+RCC.SPI1Freq_Value=250000000
+RCC.SPI2Freq_Value=250000000
+RCC.SPI3Freq_Value=250000000
+RCC.SPI4Freq_Value=250000000
+RCC.SPI5Freq_Value=250000000
+RCC.SPI6Freq_Value=250000000
+RCC.SYSCLKFreq_VALUE=250000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.UART12Freq_Value=250000000
+RCC.UART4Freq_Value=250000000
+RCC.UART5Freq_Value=250000000
+RCC.UART7Freq_Value=250000000
+RCC.UART8Freq_Value=250000000
+RCC.UART9Freq_Value=250000000
+RCC.UCPD1outputFreq_Value=16000000
+RCC.USART10Freq_Value=250000000
+RCC.USART11Freq_Value=250000000
+RCC.USART1Freq_Value=250000000
+RCC.USART2Freq_Value=250000000
+RCC.USART3Freq_Value=250000000
+RCC.USART6Freq_Value=250000000
+RCC.USBFreq_Value=48000000
+RCC.VCOInput2Freq_Value=4000000
+RCC.VCOInput3Freq_Value=4000000
+RCC.VCOInputFreq_Value=2000000
+RCC.VCOOutputFreq_Value=500000000
+RCC.VCOPLL2OutputFreq_Value=516000000
+RCC.VCOPLL3OutputFreq_Value=516000000
+SH.ADCx_INP18.0=ADC1_INP18
+SH.ADCx_INP18.ConfNb=1
+SH.GPXTI13.0=GPIO_EXTI13
+SH.GPXTI13.ConfNb=1
+SH.GPXTI7.0=GPIO_EXTI7
+SH.GPXTI7.ConfNb=1
+USB.IPParameters=VirtualMode
+USB.VirtualMode=Device_Only
+VP_BOOTPATH_VS_BOOTPATH.Mode=BP_Activate
+VP_BOOTPATH_VS_BOOTPATH.Signal=BOOTPATH_VS_BOOTPATH
+VP_ICACHE_VS_ICACHE.Mode=DirectMappedCache
+VP_ICACHE_VS_ICACHE.Signal=ICACHE_VS_ICACHE
+VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg
+VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP
+VP_PWR_VS_DBSignals.Mode=DisableDeadBatterySignals
+VP_PWR_VS_DBSignals.Signal=PWR_VS_DBSignals
+VP_PWR_VS_LPOM.Mode=PowerOptimisation
+VP_PWR_VS_LPOM.Signal=PWR_VS_LPOM
+VP_PWR_VS_SECSignals.Mode=Security/Privilege
+VP_PWR_VS_SECSignals.Signal=PWR_VS_SECSignals
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=NUCLEO-H563ZI
+boardIOC=true
diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake
new file mode 100644
index 000000000..92d6d98f0
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake
@@ -0,0 +1,8 @@
+set(MCU_VARIANT stm32h573xx)
+set(JLINK_DEVICE stm32h573ii)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32H573xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h
new file mode 100644
index 000000000..674cf8e2a
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h
@@ -0,0 +1,115 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ * Copyright (c) 2023, HiFiPhile
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOI
+#define LED_PIN               GPIO_PIN_9
+#define LED_STATE_ON          0
+
+// Button
+#define BUTTON_PORT           GPIOC
+#define BUTTON_PIN            GPIO_PIN_13
+#define BUTTON_STATE_ACTIVE   0
+
+// UART Enable for STLink VCOM
+#define UART_DEV              USART1
+#define UART_CLK_EN           __USART1_CLK_ENABLE
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF7_USART1
+
+#define UART_TX_PIN           GPIO_PIN_9
+#define UART_RX_PIN           GPIO_PIN_10
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage */
+  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  Freq 250MHZ */
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS_DIGITAL;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLL1_SOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 5;
+  RCC_OscInitStruct.PLL.PLLN = 100;
+  RCC_OscInitStruct.PLL.PLLP = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 10;
+  RCC_OscInitStruct.PLL.PLLR = 2;
+  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1_VCIRANGE_2;
+  RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1_VCORANGE_WIDE;
+  RCC_OscInitStruct.PLL.PLLFRACN = 0;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /** Initializes the CPU, AHB and APB buses clocks */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
+
+  // Configure CRS clock source
+  __HAL_RCC_CRS_CLK_ENABLE();
+  RCC_CRSInitTypeDef RCC_CRSInitStruct = {0};
+  RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
+  RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
+  RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING;
+  RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000);
+  RCC_CRSInitStruct.ErrorLimitValue = 34;
+  RCC_CRSInitStruct.HSI48CalibrationValue = 32;
+  HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
+
+  /* Select HSI48 as USB clock source */
+  RCC_PeriphCLKInitTypeDef usb_clk = {0 };
+  usb_clk.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  usb_clk.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+  HAL_RCCEx_PeriphCLKConfig(&usb_clk);
+
+  /* Peripheral clock enable */
+  __HAL_RCC_USB_CLK_ENABLE();
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk
new file mode 100644
index 000000000..b24acf89f
--- /dev/null
+++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk
@@ -0,0 +1,7 @@
+MCU_VARIANT = stm32h573xx
+
+CFLAGS += \
+	-DSTM32H573xx
+
+# For flash-jlink target
+JLINK_DEVICE = stm32h573ii
diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c
new file mode 100644
index 000000000..ed1389a12
--- /dev/null
+++ b/hw/bsp/stm32h5/family.c
@@ -0,0 +1,213 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ * Copyright (c) 2023 HiFiPhile
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+
+// Suppress warning caused by mcu driver
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wundef"
+#endif
+
+#include "stm32h5xx_hal.h"
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
+#include "bsp/board_api.h"
+
+TU_ATTR_UNUSED static void Error_Handler(void) {
+}
+
+#include "board.h"
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USB_DRD_FS_IRQHandler(void) {
+  tud_int_handler(0);
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM
+//--------------------------------------------------------------------+
+UART_HandleTypeDef UartHandle;
+
+void board_init(void) {
+  HAL_Init(); // required for HAL_RCC_Osc TODO check with freeRTOS
+  SystemClock_Config(); // implemented in board.h
+  SystemCoreClockUpdate();
+
+  // Enable All GPIOs clocks
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOE_CLK_ENABLE();
+  __HAL_RCC_GPIOG_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+  __HAL_RCC_GPIOI_CLK_ENABLE();
+
+  //__HAL_RCC_SYSCFG_CLK_ENABLE();
+  //__HAL_RCC_PWR_CLK_ENABLE();
+
+      UART_CLK_EN();
+
+  #if CFG_TUSB_OS == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+  #elif CFG_TUSB_OS == OPT_OS_FREERTOS
+  // Explicitly disable systick to prevent its ISR runs before scheduler start
+  SysTick->CTRL &= ~1U;
+
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(USB_DRD_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  #endif
+
+  GPIO_InitTypeDef GPIO_InitStruct;
+
+  // LED
+  GPIO_InitStruct.Pin = LED_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
+
+  board_led_write(false);
+
+  // Button
+  GPIO_InitStruct.Pin = BUTTON_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
+
+  #ifdef UART_DEV
+  // UART
+  GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = UART_GPIO_AF;
+  HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct);
+
+  UartHandle = (UART_HandleTypeDef) {
+      .Instance        = UART_DEV,
+      .Init.BaudRate   = CFG_BOARD_UART_BAUDRATE,
+      .Init.WordLength = UART_WORDLENGTH_8B,
+      .Init.StopBits   = UART_STOPBITS_1,
+      .Init.Parity     = UART_PARITY_NONE,
+      .Init.HwFlowCtl  = UART_HWCONTROL_NONE,
+      .Init.Mode       = UART_MODE_TX_RX,
+      .Init.OverSampling = UART_OVERSAMPLING_16,
+      .AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT
+  };
+  HAL_UART_Init(&UartHandle);
+  #endif
+
+  // USB Pins TODO double check USB clock and pin setup
+  // Configure USB DM and DP pins. This is optional, and maintained only for user guidance.
+  GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* Peripheral clock enable */
+  __HAL_RCC_USB_CLK_ENABLE();
+
+  /* Enable VDDUSB */
+  HAL_PWREx_EnableVddUSB();
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state) {
+  GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1 - LED_STATE_ON));
+  HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state);
+}
+
+uint32_t board_button_read(void) {
+  return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  volatile uint32_t* stm32_uuid = (volatile uint32_t*) UID_BASE;
+  uint32_t* id32 = (uint32_t*) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = stm32_uuid[0];
+  id32[1] = stm32_uuid[1];
+  id32[2] = stm32_uuid[2];
+
+  return len;
+}
+
+int board_uart_read(uint8_t* buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+int board_uart_write(void const* buf, int len) {
+  #ifdef UART_DEV
+  HAL_UART_Transmit(&UartHandle, (uint8_t*) (uintptr_t) buf, len, 0xffff);
+  return len;
+  #else
+  (void) buf;
+  (void) len;
+  (void) UartHandle;
+  return 0;
+  #endif
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+
+void SysTick_Handler(void) {
+  system_ticks++;
+  HAL_IncTick();
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+
+}
diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake
new file mode 100644
index 000000000..e5850f38d
--- /dev/null
+++ b/hw/bsp/stm32h5/family.cmake
@@ -0,0 +1,116 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY h5)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32H5 CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+  set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+  set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+  string(REPLACE "stm32h" "STM32H" MCU_VARIANT_UPPER ${MCU_VARIANT})
+  set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT_UPPER}_FLASH.ld)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+    ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMSIS_5}/CMSIS/Core/Include
+    ${ST_CMSIS}/Include
+    ${ST_HAL_DRIVER}/Inc
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      # nanolib
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32H5 ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+    ${TOP}/src/portable/st/typec/typec_stm32.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()
diff --git a/hw/bsp/stm32h5/family.mk b/hw/bsp/stm32h5/family.mk
new file mode 100644
index 000000000..270b1c465
--- /dev/null
+++ b/hw/bsp/stm32h5/family.mk
@@ -0,0 +1,62 @@
+ST_FAMILY = h5
+ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
+ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m33
+
+MCU_VARIANT_UPPER = $(subst stm32h,STM32H,$(MCU_VARIANT))
+
+# --------------
+# Compiler Flags
+# --------------
+CFLAGS += \
+  -DCFG_TUSB_MCU=OPT_MCU_STM32H5
+
+# GCC Flags
+CFLAGS_GCC += \
+  -flto \
+  -nostdlib -nostartfiles \
+
+# suppress warning caused by vendor mcu driver
+CFLAGS_GCC += \
+  -Wno-error=cast-align \
+  -Wno-error=undef \
+  -Wno-error=unused-parameter \
+
+LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs
+
+# -----------------
+# Sources & Include
+# -----------------
+
+SRC_C += \
+	src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
+	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
+	$(TOP)/$(ST_CMSIS)/Include \
+	$(TOP)/$(ST_HAL_DRIVER)/Inc
+
+# Startup
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s
+
+# Linker
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf
+LD_FILE_GCC = $(ST_CMSIS)/Source/Templates/gcc/linker/$(MCU_VARIANT_UPPER)_FLASH.ld
+
+# flash target using on-board stlink
+flash: flash-stlink
diff --git a/hw/bsp/stm32h5/stm32h5xx_hal_conf.h b/hw/bsp/stm32h5/stm32h5xx_hal_conf.h
new file mode 100644
index 000000000..d017bb06b
--- /dev/null
+++ b/hw/bsp/stm32h5/stm32h5xx_hal_conf.h
@@ -0,0 +1,355 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32h5xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2018-2021 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32h5xx_HAL_CONF_H
+#define STM32h5xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+/* #define HAL_ADC_MODULE_ENABLED   */
+/* #define HAL_CEC_MODULE_ENABLED   */
+/* #define HAL_COMP_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_DAC_MODULE_ENABLED   */
+/* #define HAL_EXTI_MODULE_ENABLED   */
+/* #define HAL_FDCAN_MODULE_ENABLED   */
+/* #define HAL_HCD_MODULE_ENABLED   */
+/* #define HAL_I2C_MODULE_ENABLED   */
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_LPTIM_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+/* #define HAL_RTC_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+/* #define HAL_TIM_MODULE_ENABLED   */
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief This is the list of modules where register callback can be used
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS    0u
+#define USE_HAL_CEC_REGISTER_CALLBACKS    0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS   0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS   0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS    0u
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS  0u
+#define USE_HAL_HCD_REGISTER_CALLBACKS    0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS    0u
+#define USE_HAL_I2S_REGISTER_CALLBACKS    0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS   0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS  0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS    0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS    0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS    0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS  0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS    0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS    0u
+#define USE_HAL_UART_REGISTER_CALLBACKS   0u
+#define USE_HAL_USART_REGISTER_CALLBACKS  0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS   0u
+
+
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    25000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Core Speed oscillator (CSI) default value.
+  *        This value is the default CSI range value after Reset.
+  */
+#if !defined  (CSI_VALUE)
+#define CSI_VALUE              4000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE              64000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE)
+#define HSI48_VALUE             48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+                                                  The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE  32000UL    /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature.*/
+
+#if !defined  (LSI_STARTUP_TIME)
+#define LSI_STARTUP_TIME          130UL      /*!< Time out for LSI start up, in ms */
+#endif /* LSI_STARTUP_TIME */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE  32768UL    /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000UL     /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SPI/SAI peripheral
+  *        This value is used by the SPI/SAI HAL module to compute the SPI/SAI clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+#define EXTERNAL_CLOCK_VALUE    12288000UL /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ############################################ System Configuration ################################################ */
+
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE                  3300UL /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY          (15UL)  /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                   0U
+#define  PREFETCH_ENABLE            0U               /*!< Enable prefetch */
+
+
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* ################## CRYP peripheral configuration ########################## */
+
+#define USE_HAL_CRYP_SUSPEND_RESUME     1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include modules header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32h5xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32h5xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32h5xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32h5xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32h5xx_hal_adc.h"
+#include "stm32h5xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32h5xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+#include "stm32h5xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32h5xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32h5xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32h5xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32h5xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32h5xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+#include "stm32h5xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32h5xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32h5xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32h5xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32h5xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32h5xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32h5xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32h5xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32h5xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32h5xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32h5xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32h5xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+#include "stm32h5xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32h5xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32h5xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32h5xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32h5xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32h5xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for functions parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32h5xx_HAL_CONF_H */
diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h
index 6fab190ea..e589c4c86 100644
--- a/src/common/tusb_mcu.h
+++ b/src/common/tusb_mcu.h
@@ -210,6 +210,11 @@
 
   #define TUP_DCD_ENDPOINT_MAX    9
 
+#elif TU_CHECK_MCU(OPT_MCU_STM32H5)
+  #define TUP_USBIP_FSDEV
+  #define TUP_USBIP_FSDEV_STM32
+  #define TUP_DCD_ENDPOINT_MAX    8
+
 #elif TU_CHECK_MCU(OPT_MCU_STM32G4)
   // Device controller
   #define TUP_USBIP_FSDEV
diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
index 14cabaf8d..21cd3da26 100644
--- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
@@ -242,7 +242,7 @@ void dcd_init (uint8_t rhport)
   }
   USB->CNTR = 0; // Enable USB
 
-#ifndef STM32G0 // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address
+#if !defined(STM32G0) && !defined(STM32H5)  // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address
   USB->BTABLE = DCD_STM32_BTABLE_BASE;
 #endif
   USB->ISTR = 0; // Clear pending interrupts
@@ -358,6 +358,9 @@ void dcd_int_enable (uint8_t rhport)
     NVIC_EnableIRQ(USB_UCPD1_2_IRQn);
   #endif
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32H5
+    NVIC_EnableIRQ(USB_DRD_FS_IRQn);
+
 #elif CFG_TUSB_MCU == OPT_MCU_STM32WB
   NVIC_EnableIRQ(USB_HP_IRQn);
   NVIC_EnableIRQ(USB_LP_IRQn);
@@ -415,6 +418,9 @@ void dcd_int_disable(uint8_t rhport)
     NVIC_DisableIRQ(USB_UCPD1_2_IRQn);
   #endif
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32H5
+    NVIC_DisableIRQ(USB_DRD_FS_IRQn);
+
 #elif CFG_TUSB_MCU == OPT_MCU_STM32WB
   NVIC_DisableIRQ(USB_HP_IRQn);
   NVIC_DisableIRQ(USB_LP_IRQn);
diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev_pvt_st.h b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev_pvt_st.h
index e6649de5a..b71e4f498 100644
--- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev_pvt_st.h
+++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev_pvt_st.h
@@ -110,6 +110,35 @@
   #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY
   #define USB_CNTR_FSUSP USB_CNTR_SUSPEN
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32H5
+  #include "stm32h5xx.h"
+  #define PMA_32BIT_ACCESS
+  #define PMA_LENGTH (2048u)
+  #undef USB_PMAADDR
+  #define USB_PMAADDR USB_DRD_PMAADDR
+  #define USB_TypeDef USB_DRD_TypeDef
+  #define EP0R CHEP0R
+  #define USB_EP_CTR_RX USB_EP_VTRX
+  #define USB_EP_CTR_TX USB_EP_VTTX
+  #define USB_EP_T_FIELD USB_CHEP_UTYPE
+  #define USB_EPREG_MASK USB_CHEP_REG_MASK
+  #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK
+  #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK
+  #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1
+  #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2
+  #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1
+  #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2
+  #define USB_EPRX_STAT USB_CH_RX_VALID
+  #define USB_EPKIND_MASK USB_EP_KIND_MASK
+  #define USB USB_DRD_FS
+  #define USB_CNTR_FRES USB_CNTR_USBRST
+  #define USB_CNTR_RESUME USB_CNTR_L2RES
+  #define USB_ISTR_EP_ID USB_ISTR_IDN
+  #define USB_EPADDR_FIELD USB_CHEP_ADDR
+  #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY
+  #define USB_CNTR_FSUSP USB_CNTR_SUSPEN
+
+
 #elif CFG_TUSB_MCU == OPT_MCU_STM32WB
   #include "stm32wbxx.h"
   #define PMA_LENGTH (1024u)
diff --git a/src/tusb_option.h b/src/tusb_option.h
index 4d2aa137c..a76281c0c 100644
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@@ -86,6 +86,7 @@
 #define OPT_MCU_STM32WB           312 ///< ST WB
 #define OPT_MCU_STM32U5           313 ///< ST U5
 #define OPT_MCU_STM32L5           314 ///< ST L5
+#define OPT_MCU_STM32H5           315 ///< ST H5
 
 // Sony
 #define OPT_MCU_CXD56             400 ///< SONY CXD56
diff --git a/tools/get_deps.py b/tools/get_deps.py
index 79c272c07..86ffdc5c7 100644
--- a/tools/get_deps.py
+++ b/tools/get_deps.py
@@ -95,6 +95,9 @@ deps_optional = {
     'hw/mcu/st/cmsis_device_h7': ['https://github.com/STMicroelectronics/cmsis_device_h7.git',
                                   '60dc2c913203dc8629dc233d4384dcc41c91e77f',
                                   'stm32h7'],
+    'hw/mcu/st/cmsis_device_h5': ['https://github.com/STMicroelectronics/cmsis_device_h5.git',
+                                  '62b2cb0fbfe10c5791ee469bbde7b397c2fea8f5',
+                                  'stm32h5'],
     'hw/mcu/st/cmsis_device_l0': ['https://github.com/STMicroelectronics/cmsis_device_l0.git',
                                   '06748ca1f93827befdb8b794402320d94d02004f',
                                   'stm32l0'],
@@ -140,6 +143,9 @@ deps_optional = {
     'hw/mcu/st/stm32h7xx_hal_driver': ['https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git',
                                        'd8461b980b59b1625207d8c4f2ce0a9c2a7a3b04',
                                        'stm32h7'],
+    'hw/mcu/st/stm32h5xx_hal_driver': ['https://github.com/STMicroelectronics/stm32h5xx_hal_driver.git',
+                                       '2cf77de584196d619cec1b4586c3b9e2820a254e',
+                                       'stm32h5'],
     'hw/mcu/st/stm32l0xx_hal_driver': ['https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git',
                                        'fbdacaf6f8c82a4e1eb9bd74ba650b491e97e17b',
                                        'stm32l0'],
@@ -170,7 +176,7 @@ deps_optional = {
     'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git',
                     '20285262657d1b482d132d20d755c8c330d55c1f',
                     'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x'
-                    'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 '
+                    'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5'
                     'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb'],
     'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git',
                          'e73e04ca63495672d955f9268e003cffe168fcd8',
@@ -204,16 +210,16 @@ def get_a_dep(d):
     # Init git deps if not existed
     if not p.exists():
         p.mkdir(parents=True)
-        run_cmd(f"git -C {p} init")
-        run_cmd(f"git -C {p} remote add origin {url}")
+        run_cmd(f"{git_cmd} init")
+        run_cmd(f"{git_cmd} remote add origin {url}")
 
     # Check if commit is already fetched
-    result = run_cmd(f"git -C {p} rev-parse HEAD")
+    result = run_cmd(f"{git_cmd} rev-parse HEAD")
     head = result.stdout.decode("utf-8").splitlines()[0]
-    run_cmd(f"git -C {p} reset --hard")
+    run_cmd(f"{git_cmd} reset --hard")
     if commit != head:
-        run_cmd(f"git -C {p} fetch --depth 1 origin {commit}")
-        run_cmd(f"git -C {p} checkout FETCH_HEAD")
+        run_cmd(f"{git_cmd} fetch --depth 1 origin {commit}")
+        run_cmd(f"{git_cmd} checkout FETCH_HEAD")
 
     return 0