clean up

12 files changed, 0 insertions, 1754 deletions

diff --git a/hw/bsp/ea4357/oem_base_board/acc.c b/hw/bsp/ea4357/oem_base_board/acc.c
deleted file mode 100644
index a53634980..000000000
--- a/hw/bsp/ea4357/oem_base_board/acc.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "lpc_types.h"
-#include "lpc43xx_i2c.h"
-#include "acc.h"
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-#define I2C_PORT (LPC_I2C0)
-
-#define ACC_I2C_ADDR    (0x1D)
-
-#define ACC_ADDR_XOUTL  0x00
-#define ACC_ADDR_XOUTH  0x01
-#define ACC_ADDR_YOUTL  0x02
-#define ACC_ADDR_YOUTX  0x03
-#define ACC_ADDR_ZOUTL  0x04
-#define ACC_ADDR_ZOUTH  0x05
-#define ACC_ADDR_XOUT8  0x06
-#define ACC_ADDR_YOUT8  0x07
-#define ACC_ADDR_ZOUT8  0x08
-#define ACC_ADDR_STATUS 0x09
-#define ACC_ADDR_DETSRC 0x0A
-#define ACC_ADDR_TOUT   0x0B
-#define ACC_ADDR_I2CAD  0x0D
-#define ACC_ADDR_USRINF 0x0E
-#define ACC_ADDR_WHOAMI 0x0F
-#define ACC_ADDR_XOFFL  0x10
-#define ACC_ADDR_XOFFH  0x11
-#define ACC_ADDR_YOFFL  0x12
-#define ACC_ADDR_YOFFH  0x13
-#define ACC_ADDR_ZOFFL  0x14
-#define ACC_ADDR_ZOFFH  0x15
-#define ACC_ADDR_MCTL   0x16
-#define ACC_ADDR_INTRST 0x17
-#define ACC_ADDR_CTL1   0x18
-#define ACC_ADDR_CTL2   0x19
-#define ACC_ADDR_LDTH   0x1A
-#define ACC_ADDR_PDTH   0x1B
-#define ACC_ADDR_PW     0x1C
-#define ACC_ADDR_LT     0x1D
-#define ACC_ADDR_TW     0x1E
-
-#define ACC_MCTL_MODE(m) ((m) << 0)
-#define ACC_MCTL_GLVL(g) ((g) << 2)
-
-
-#define ACC_STATUS_DRDY 0x01
-#define ACC_STATUS_DOVR 0x02
-#define ACC_STATUS_PERR 0x04
-
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) 
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = buf;
-	i2cData.tx_length = len;
-	i2cData.rx_data = NULL;
-	i2cData.rx_length = 0;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) 
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = NULL;
-	i2cData.tx_length = 0;
-	i2cData.rx_data = buf;
-	i2cData.rx_length = len;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-
-static uint8_t getStatus(void)
-{
-    uint8_t buf[1];
-
-    buf[0] = ACC_ADDR_STATUS;
-    I2CWrite(ACC_I2C_ADDR, buf, 1);
-    I2CRead(ACC_I2C_ADDR, buf, 1);
-
-    return buf[0];
-}
-
-static uint8_t getModeControl(void)
-{
-    uint8_t buf[1];
-
-    buf[0] = ACC_ADDR_MCTL;
-    I2CWrite(ACC_I2C_ADDR, buf, 1);
-    I2CRead(ACC_I2C_ADDR, buf, 1);
-
-    return buf[0];
-}
-
-static void setModeControl(uint8_t mctl)
-{
-    uint8_t buf[2];
-
-    buf[0] = ACC_ADDR_MCTL;
-    buf[1] = mctl;
-    I2CWrite(ACC_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *    Initialize the ISL29003 Device
- *
- *****************************************************************************/
-void acc_init (void)
-{
-
-    /* set to measurement mode by default */
-
-    setModeControl( (ACC_MCTL_MODE(ACC_MODE_MEASURE)
-            | ACC_MCTL_GLVL(ACC_RANGE_2G) ));
-
-}
-
-/******************************************************************************
- *
- * Description:
- *    Read accelerometer data
- *
- * Params:
- *   [out] x - read x value
- *   [out] y - read y value
- *   [out] z - read z value
- *
- *****************************************************************************/
-void acc_read (int8_t *x, int8_t *y, int8_t *z)
-{
-    uint8_t buf[1];
-
-    /* wait for ready flag */
-    while ((getStatus() & ACC_STATUS_DRDY) == 0);
-
-    /*
-     * Have experienced problems reading all registers
-     * at once. Change to reading them one-by-one.
-     */
-    buf[0] = ACC_ADDR_XOUT8;
-    I2CWrite(ACC_I2C_ADDR, buf, 1);
-    I2CRead(ACC_I2C_ADDR, buf, 1);
-
-    *x = (int8_t)buf[0];
-
-    buf[0] = ACC_ADDR_YOUT8;
-    I2CWrite(ACC_I2C_ADDR, buf, 1);
-    I2CRead(ACC_I2C_ADDR, buf, 1);
-
-    *y = (int8_t)buf[0];
-
-    buf[0] = ACC_ADDR_ZOUT8;
-    I2CWrite(ACC_I2C_ADDR, buf, 1);
-    I2CRead(ACC_I2C_ADDR, buf, 1);
-
-    *z = (int8_t)buf[0];
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set the g-Range
- *
- * Params:
- *   [in] range - the g-Range
- *
- *****************************************************************************/
-void acc_setRange(acc_range_t range)
-{
-    uint8_t mctl = 0;
-
-    mctl = getModeControl();
-
-    mctl &= ~(0x03 << 2);
-    mctl |= ACC_MCTL_GLVL(range);
-
-    setModeControl(mctl);
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set sensor mode
- *
- * Params:
- *   [in] mode - the mode to set
- *
- *****************************************************************************/
-void acc_setMode(acc_mode_t mode)
-{
-    uint8_t mctl = 0;
-
-    mctl = getModeControl();
-
-    mctl &= ~(0x03 << 0);
-    mctl |= ACC_MCTL_MODE(mode);
-
-    setModeControl(mctl);
-}
-
-#endif
diff --git a/hw/bsp/ea4357/oem_base_board/acc.h b/hw/bsp/ea4357/oem_base_board/acc.h
deleted file mode 100644
index 3a739e0b0..000000000
--- a/hw/bsp/ea4357/oem_base_board/acc.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __ACC_H
-#define __ACC_H
-
-
-typedef enum
-{
-    ACC_MODE_STANDBY,
-    ACC_MODE_MEASURE,
-    ACC_MODE_LEVEL, /* level detection */
-    ACC_MODE_PULSE, /* pulse detection */
-} acc_mode_t;
-
-typedef enum
-{
-    ACC_RANGE_8G,
-    ACC_RANGE_2G,
-    ACC_RANGE_4G,
-} acc_range_t;
-
-
-void acc_init (void);
-
-void acc_read (int8_t *x, int8_t *y, int8_t *z);
-void acc_setRange(acc_range_t range);
-void acc_setMode(acc_mode_t mode);
-
-
-
-#endif /* end __LIGHT_H */
-/****************************************************************************
-**                            End Of File
-*****************************************************************************/
diff --git a/hw/bsp/ea4357/oem_base_board/base_eeprom.c b/hw/bsp/ea4357/oem_base_board/base_eeprom.c
deleted file mode 100644
index 7571744a6..000000000
--- a/hw/bsp/ea4357/oem_base_board/base_eeprom.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-/*
- * NOTE: I2C must have been initialized before calling any functions in this
- * file.
- */
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include <string.h>
-#include <stdio.h>
-#include "lpc_types.h"
-#include "lpc43xx_i2c.h"
-#include "base_eeprom.h"
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-#define I2C_PORT (LPC_I2C0)
-
-#ifndef MIN
-#define MIN(x, y) ((x) < (y) ? (x) : (y))
-#endif
-
-#define EEPROM_I2C_ADDR    (0x57)
-
-#define EEPROM_PAGE_SIZE     32
-
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-static void eepromDelay(void)
-{
-  volatile int i = 0;
-  for (i = 0; i <0x20000; i++);
-}
-
-static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) 
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = buf;
-	i2cData.tx_length = len;
-	i2cData.rx_data = NULL;
-	i2cData.rx_length = 0;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) 
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = NULL;
-	i2cData.tx_length = 0;
-	i2cData.rx_data = buf;
-	i2cData.rx_length = len;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *    Initialize the EEPROM Driver
- *
- *****************************************************************************/
-void base_eeprom_init (void)
-{
-  I2C_Cmd(I2C_PORT, ENABLE);
-}
-
-/******************************************************************************
- *
- * Description:
- *    Read from the EEPROM
- *
- * Params:
- *   [in] buf - read buffer
- *   [in] offset - offset to start to read from
- *   [in] len - number of bytes to read
- *
- * Returns:
- *   number of read bytes or -1 in case of an error
- *
- *****************************************************************************/
-int16_t base_eeprom_read(uint8_t* buf, uint16_t offset, uint16_t len)
-{
-  uint8_t addr = 0;
-  int i = 0;
-  uint8_t off[2];
-
-  if (len > BASE_EEPROM_TOTAL_SIZE || offset+len > BASE_EEPROM_TOTAL_SIZE) {
-    return -1;
-  }
-
-  addr = EEPROM_I2C_ADDR;
-  off[0] = ((offset >> 8) & 0xff);
-  off[1] = (offset & 0xff);
-
-  I2CWrite((addr << 1), off, 2);
-  for ( i = 0; i < 0x2000; i++);
-  I2CRead((addr << 1), buf, len);
-
-  return len;
-
-}
-
-/******************************************************************************
- *
- * Description:
- *    Write to the EEPROM
- *
- * Params:
- *   [in] buf - data to write
- *   [in] offset - offset to start to write to
- *   [in] len - number of bytes to write
- *
- * Returns:
- *   number of written bytes or -1 in case of an error
- *
- *****************************************************************************/
-int16_t base_eeprom_write(uint8_t* buf, uint16_t offset, uint16_t len)
-{
-  uint8_t addr = 0;
-  int16_t written = 0;
-  uint16_t wLen = 0;
-  uint16_t off = offset;
-  uint8_t tmp[EEPROM_PAGE_SIZE+2];
-
-  if (len > BASE_EEPROM_TOTAL_SIZE || offset+len > BASE_EEPROM_TOTAL_SIZE) {
-    return -1;
-  }
-
-  addr = EEPROM_I2C_ADDR;
-
-  wLen = EEPROM_PAGE_SIZE - (off % EEPROM_PAGE_SIZE);
-  wLen = MIN(wLen, len);
-
-  while (len) {
-    tmp[0] = ((off >> 8) & 0xff);
-    tmp[1] = (off & 0xff);
-    memcpy(&tmp[2], (void*)&buf[written], wLen);
-    I2CWrite((addr << 1), tmp, wLen+2);
-
-    /* delay to wait for a write cycle */
-    eepromDelay();
-
-    len     -= wLen;
-    written += wLen;
-    off     += wLen;
-
-    wLen = MIN(EEPROM_PAGE_SIZE, len);
-  }
-
-  return written;
-}
-
-#endif
diff --git a/hw/bsp/ea4357/oem_base_board/base_eeprom.h b/hw/bsp/ea4357/oem_base_board/base_eeprom.h
deleted file mode 100644
index 0d7023093..000000000
--- a/hw/bsp/ea4357/oem_base_board/base_eeprom.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __BASE_EEPROM_H
-#define __BASE_EEPROM_H
-
-#define BASE_EEPROM_TOTAL_SIZE 8192
-
-void base_eeprom_init (void);
-int16_t base_eeprom_read(uint8_t* buf, uint16_t offset, uint16_t len);
-int16_t base_eeprom_write(uint8_t* buf, uint16_t offset, uint16_t len);
-
-
-#endif /* end __BASE_EEPROM_H */
-/****************************************************************************
-**                            End Of File
-*****************************************************************************/
diff --git a/hw/bsp/ea4357/oem_base_board/lm75a.c b/hw/bsp/ea4357/oem_base_board/lm75a.c
deleted file mode 100644
index db8234405..000000000
--- a/hw/bsp/ea4357/oem_base_board/lm75a.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-/*
- * NOTE: I2C must have been initialized before calling any functions in this
- * file.
- */
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include <string.h>
-#include <stdio.h>
-#include "lpc_types.h"
-#include "lpc43xx_i2c.h"
-
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-#define I2C_PORT (LPC_I2C0)
-
-#define LM75A_I2C_ADDR    (0x48)
-
-#define LM75A_CMD_TEMP 0x00
-
-#define I2CDEV LPC_I2C2
-
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) 
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = buf;
-	i2cData.tx_length = len;
-	i2cData.rx_data = NULL;
-	i2cData.rx_length = 0;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) 
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = NULL;
-	i2cData.tx_length = 0;
-	i2cData.rx_data = buf;
-	i2cData.rx_length = len;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *    Initialize the EEPROM Driver
- *
- *****************************************************************************/
-void lm75a_init (void)
-{
-
-}
-
-/******************************************************************************
- *
- * Description:
- *    Read the temperature
- *
- * Params: None
- *
- * Returns:
- *   The measured temperature x 100, i.e. 26.50 degrees returned as 2650
- *
- *****************************************************************************/
-int32_t lm75a_readTemp(void)
-{
-    uint8_t temp[2];
-    int16_t t = 0;
-
-    I2CWrite(LM75A_I2C_ADDR, LM75A_CMD_TEMP, 1);
-    I2CRead(LM75A_I2C_ADDR, temp, 2);
-
-    /* 11 MSB bits used. Celcius is calculated as Temp data * 1/8 */
-    t = ((temp[0] << 8) | (temp[1]));
-
-    return ((t * 100) >> 8);
-
-}
-
-
-#endif
diff --git a/hw/bsp/ea4357/oem_base_board/lm75a.h b/hw/bsp/ea4357/oem_base_board/lm75a.h
deleted file mode 100644
index 0ed6c8dfe..000000000
--- a/hw/bsp/ea4357/oem_base_board/lm75a.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __LM75A_H
-#define __LM75A_H
-
-
-void lm75a_init (void);
-int32_t lm75a_readTemp(void);
-
-
-#endif /* end __LM75A_H */
-/****************************************************************************
-**                            End Of File
-*****************************************************************************/
diff --git a/hw/bsp/ea4357/oem_base_board/memreg.c b/hw/bsp/ea4357/oem_base_board/memreg.c
deleted file mode 100644
index 51bcada4b..000000000
--- a/hw/bsp/ea4357/oem_base_board/memreg.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "LPC43xx.h"
-#include "lpc_types.h"
-#include "lpc43xx_scu.h"
-#include "memreg.h"
-
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-static void pinConfig(void)
-{
-  /* Set up EMC pin */
-  scu_pinmux(   2  ,   9  ,  MD_PLN_FAST  ,  3  );//A0
-  scu_pinmux(   2  ,  10  ,  MD_PLN_FAST  ,  3  );//A1
-  scu_pinmux(   2  ,  11  ,  MD_PLN_FAST  ,  3  );//A2
-  scu_pinmux(   2  ,  12  ,  MD_PLN_FAST  ,  3  );//A3
-  scu_pinmux(   2  ,  13  ,  MD_PLN_FAST  ,  3  );//A4
-  scu_pinmux(   1  ,   0  ,  MD_PLN_FAST  ,  2  );//A5
-  scu_pinmux(   1  ,   1  ,  MD_PLN_FAST  ,  2  );//A6
-  scu_pinmux(   1  ,   2  ,  MD_PLN_FAST  ,  2  );//A7
-  scu_pinmux(   2  ,   8  ,  MD_PLN_FAST  ,  3  );//A8
-  scu_pinmux(   2  ,   7  ,  MD_PLN_FAST  ,  3  );//A9
-  scu_pinmux(   2  ,   6  ,  MD_PLN_FAST  ,  2  );//A10
-  scu_pinmux(   2  ,   2  ,  MD_PLN_FAST  ,  2  );//A11
-  scu_pinmux(   2  ,   1  ,  MD_PLN_FAST  ,  2  );//A12
-  scu_pinmux(   2  ,   0  ,  MD_PLN_FAST  ,  2  );//A13
-  scu_pinmux(   6  ,   8  ,  MD_PLN_FAST  ,  1  );//A14
-  scu_pinmux(   6  ,   7  ,  MD_PLN_FAST  ,  1  );//A15
-  scu_pinmux(  13  ,  16  ,  MD_PLN_FAST  ,  2  );//A16
-  scu_pinmux(  13  ,  15  ,  MD_PLN_FAST  ,  2  );//A17
-  scu_pinmux(  14  ,   0  ,  MD_PLN_FAST  ,  3  );//A18
-  scu_pinmux(  14  ,   1  ,  MD_PLN_FAST  ,  3  );//A19
-  scu_pinmux(  14  ,   2  ,  MD_PLN_FAST  ,  3  );//A20
-  scu_pinmux(  14  ,   3  ,  MD_PLN_FAST  ,  3  );//A21
-  scu_pinmux(  14  ,   4  ,  MD_PLN_FAST  ,  3  );//A22
-  scu_pinmux(  10  ,   4  ,  MD_PLN_FAST  ,  3  );//A23
-
-  scu_pinmux(   1  ,   7  ,  MD_PLN_FAST  ,  3  );//D0
-  scu_pinmux(   1  ,   8  ,  MD_PLN_FAST  ,  3  );//D1
-  scu_pinmux(   1  ,   9  ,  MD_PLN_FAST  ,  3  );//D2
-  scu_pinmux(   1  ,  10  ,  MD_PLN_FAST  ,  3  );//D3
-  scu_pinmux(   1  ,  11  ,  MD_PLN_FAST  ,  3  );//D4
-  scu_pinmux(   1  ,  12  ,  MD_PLN_FAST  ,  3  );//D5
-  scu_pinmux(   1  ,  13  ,  MD_PLN_FAST  ,  3  );//D6
-  scu_pinmux(   1  ,  14  ,  MD_PLN_FAST  ,  3  );//D7
-  scu_pinmux(   5  ,   4  ,  MD_PLN_FAST  ,  2  );//D8
-  scu_pinmux(   5  ,   5  ,  MD_PLN_FAST  ,  2  );//D9
-  scu_pinmux(   5  ,   6  ,  MD_PLN_FAST  ,  2  );//D10
-  scu_pinmux(   5  ,   7  ,  MD_PLN_FAST  ,  2  );//D11
-  scu_pinmux(   5  ,   0  ,  MD_PLN_FAST  ,  2  );//D12
-  scu_pinmux(   5  ,   1  ,  MD_PLN_FAST  ,  2  );//D13
-  scu_pinmux(   5  ,   2  ,  MD_PLN_FAST  ,  2  );//D14
-  scu_pinmux(   5  ,   3  ,  MD_PLN_FAST  ,  2  );//D15
-  scu_pinmux(  13  ,   2  ,  MD_PLN_FAST  ,  2  );//D16
-  scu_pinmux(  13  ,   3  ,  MD_PLN_FAST  ,  2  );//D17
-  scu_pinmux(  13  ,   4  ,  MD_PLN_FAST  ,  2  );//D18
-  scu_pinmux(  13  ,   5  ,  MD_PLN_FAST  ,  2  );//D19
-  scu_pinmux(  13  ,   6  ,  MD_PLN_FAST  ,  2  );//D20
-  scu_pinmux(  13  ,   7  ,  MD_PLN_FAST  ,  2  );//D21
-  scu_pinmux(  13  ,   8  ,  MD_PLN_FAST  ,  2  );//D22
-  scu_pinmux(  13  ,   9  ,  MD_PLN_FAST  ,  2  );//D23
-  scu_pinmux(  14  ,   5  ,  MD_PLN_FAST  ,  3  );//D24
-  scu_pinmux(  14  ,   6  ,  MD_PLN_FAST  ,  3  );//D25
-  scu_pinmux(  14  ,   7  ,  MD_PLN_FAST  ,  3  );//D26
-  scu_pinmux(  14  ,   8  ,  MD_PLN_FAST  ,  3  );//D27
-  scu_pinmux(  14  ,   9  ,  MD_PLN_FAST  ,  3  );//D28
-  scu_pinmux(  14  ,  10  ,  MD_PLN_FAST  ,  3  );//D29
-  scu_pinmux(  14  ,  11  ,  MD_PLN_FAST  ,  3  );//D30
-  scu_pinmux(  14  ,  12  ,  MD_PLN_FAST  ,  3  );//D31
-
-  scu_pinmux(   1  ,   3  ,  MD_PLN_FAST  ,  3  );//OE
-  scu_pinmux(   1  ,   6  ,  MD_PLN_FAST  ,  3  );//WE
-
-  scu_pinmux(   1  ,   4  ,  MD_PLN_FAST  ,  3  );//BLS0
-  scu_pinmux(   6  ,   6  ,  MD_PLN_FAST  ,  1  );//BLS1
-  scu_pinmux(  13  ,  13  ,  MD_PLN_FAST  ,  2  );//BLS2
-  scu_pinmux(  13  ,  10  ,  MD_PLN_FAST  ,  2  );//BLS3
-
-  scu_pinmux(   1  ,   5  ,  MD_PLN_FAST  ,  3  );//CS0
-  scu_pinmux(   6  ,   3  ,  MD_PLN_FAST  ,  3  );//CS1
-  scu_pinmux(  13  ,  12  ,  MD_PLN_FAST  ,  2  );//CS2
-  scu_pinmux(  13  ,  11  ,  MD_PLN_FAST  ,  2  );//CS3
-
-  scu_pinmux(   6  ,   4  ,  MD_PLN_FAST  ,  3  );//CAS
-  scu_pinmux(   6  ,   5  ,  MD_PLN_FAST  ,  3  );//RAS
-
-  scu_pinmux(   6  ,   9  ,  MD_PLN_FAST  ,  3  );//DYCS0
-  scu_pinmux(   6  ,   1  ,  MD_PLN_FAST  ,  1  );//DYCS1
-  scu_pinmux(  13  ,  14  ,  MD_PLN_FAST  ,  2  );//DYCS2
-  scu_pinmux(  15  ,  14  ,  MD_PLN_FAST  ,  3  );//DYCS3
-
-  scu_pinmux(   6  ,  11  ,  MD_PLN_FAST  ,  3  );//CKEOUT0
-  scu_pinmux(   6  ,   2  ,  MD_PLN_FAST  ,  1  );//CKEOUT1
-  scu_pinmux(  13  ,   1  ,  MD_PLN_FAST  ,  2  );//CKEOUT2
-  scu_pinmux(  14  ,  15  ,  MD_PLN_FAST  ,  3  );//CKEOUT3
-
-  scu_pinmux(   6  ,  12  ,  MD_PLN_FAST  ,  3  );//DQMOUT0
-  scu_pinmux(   6  ,  10  ,  MD_PLN_FAST  ,  3  );//DQMOUT1
-  scu_pinmux(  13  ,   0  ,  MD_PLN_FAST  ,  2  );//DQMOUT2
-  scu_pinmux(  14  ,  13  ,  MD_PLN_FAST  ,  3  );//DQMOUT3
-}
-
-
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-
-
-/******************************************************************************
- *
- * Description:
- *    Initialize the NOR Flash
- *
- *****************************************************************************/
-uint32_t memreg_init (void)
-{
-  LPC_EMC->CONTROL   = 0x00000001;
-  LPC_EMC->CONFIG    = 0x00000000;
-
-  pinConfig();
-
-  // Setup for 16-bit access
-  LPC_EMC->STATICCONFIG2   = 0x00000001;
-
-  return FALSE;
-}
-
-#endif
-
diff --git a/hw/bsp/ea4357/oem_base_board/memreg.h b/hw/bsp/ea4357/oem_base_board/memreg.h
deleted file mode 100644
index e9ef85f03..000000000
--- a/hw/bsp/ea4357/oem_base_board/memreg.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __MEMREG_H
-#define __MEMREG_H
-
-#define MEMREG_BASE   0x1e000000
-
-
-extern uint32_t memreg_init (void);
-
-
-#endif /* end __MEMREG_H */
-/****************************************************************************
-**                            End Of File
-*****************************************************************************/
diff --git a/hw/bsp/ea4357/oem_base_board/norflash.c b/hw/bsp/ea4357/oem_base_board/norflash.c
deleted file mode 100644
index 0baf62c49..000000000
--- a/hw/bsp/ea4357/oem_base_board/norflash.c
+++ /dev/null
@@ -1,547 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "lpc_types.h"
-#include "lpc43xx_scu.h"
-#include "lpc43xx_timer.h"
-#include "norflash.h"
-
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-#define CMD_SWID      0x90
-#define CMD_CFI_QRY   0x98
-#define CMD_ID_EXIT   0xF0
-
-#define CMD_ERASE_BLOCK  0x0050
-#define CMD_ERASE_SECTOR 0x0030
-#define CMD_ERASE_CHIP   0x0010
-
-#define MAN_ID_SST         0x00BF
-#define DEV_ID_SST39VF3201 0x235B 
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-static geometry_t chip_info;
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-static void pinConfig(void)
-{
-	/* Set up EMC pin */
-	scu_pinmux(	 2	,	 9	,	MD_PLN_FAST	,	3	);//A0
-	scu_pinmux(	 2	,	10	,	MD_PLN_FAST	,	3	);//A1
-	scu_pinmux(	 2	,	11	,	MD_PLN_FAST	,	3	);//A2
-	scu_pinmux(	 2	,	12	,	MD_PLN_FAST	,	3	);//A3
-	scu_pinmux(	 2	,	13	,	MD_PLN_FAST	,	3	);//A4
-	scu_pinmux(	 1	,	 0	,	MD_PLN_FAST	,	2	);//A5
-	scu_pinmux(	 1	,	 1	,	MD_PLN_FAST	,	2	);//A6
-	scu_pinmux(	 1	,	 2	,	MD_PLN_FAST	,	2	);//A7
-	scu_pinmux(	 2	,	 8	,	MD_PLN_FAST	,	3	);//A8
-	scu_pinmux(	 2	,	 7	,	MD_PLN_FAST	,	3	);//A9
-	scu_pinmux(	 2	,	 6	,	MD_PLN_FAST	,	2	);//A10
-	scu_pinmux(	 2	,	 2	,	MD_PLN_FAST	,	2	);//A11
-	scu_pinmux(	 2	,	 1	,	MD_PLN_FAST	,	2	);//A12
-	scu_pinmux(	 2	,	 0	,	MD_PLN_FAST	,	2	);//A13
-	scu_pinmux(	 6	,	 8	,	MD_PLN_FAST	,	1	);//A14
-	scu_pinmux(	 6	,	 7	,	MD_PLN_FAST	,	1	);//A15
-	scu_pinmux(	13	,	16	,	MD_PLN_FAST	,	2	);//A16
-	scu_pinmux(	13	,	15	,	MD_PLN_FAST	,	2	);//A17
-	scu_pinmux(	14	,	 0	,	MD_PLN_FAST	,	3	);//A18
-	scu_pinmux(	14	,	 1	,	MD_PLN_FAST	,	3	);//A19
-	scu_pinmux(	14	,	 2	,	MD_PLN_FAST	,	3	);//A20
-	scu_pinmux(	14	,	 3	,	MD_PLN_FAST	,	3	);//A21
-	scu_pinmux(	14	,	 4	,	MD_PLN_FAST	,	3	);//A22
-	scu_pinmux(	10	,	 4	,	MD_PLN_FAST	,	3	);//A23
-	
-	scu_pinmux(	 1	,	 7	,	MD_PLN_FAST	,	3	);//D0
-	scu_pinmux(	 1	,	 8	,	MD_PLN_FAST	,	3	);//D1
-	scu_pinmux(	 1	,	 9	,	MD_PLN_FAST	,	3	);//D2
-	scu_pinmux(	 1	,	10	,	MD_PLN_FAST	,	3	);//D3
-	scu_pinmux(	 1	,	11	,	MD_PLN_FAST	,	3	);//D4
-	scu_pinmux(	 1	,	12	,	MD_PLN_FAST	,	3	);//D5
-	scu_pinmux(	 1	,	13	,	MD_PLN_FAST	,	3	);//D6
-	scu_pinmux(	 1	,	14	,	MD_PLN_FAST	,	3	);//D7
-	scu_pinmux(	 5	,	 4	,	MD_PLN_FAST	,	2	);//D8
-	scu_pinmux(	 5	,	 5	,	MD_PLN_FAST	,	2	);//D9
-	scu_pinmux(	 5	,	 6	,	MD_PLN_FAST	,	2	);//D10
-	scu_pinmux(	 5	,	 7	,	MD_PLN_FAST	,	2	);//D11
-	scu_pinmux(	 5	,	 0	,	MD_PLN_FAST	,	2	);//D12
-	scu_pinmux(	 5	,	 1	,	MD_PLN_FAST	,	2	);//D13
-	scu_pinmux(	 5	,	 2	,	MD_PLN_FAST	,	2	);//D14
-	scu_pinmux(	 5	,	 3	,	MD_PLN_FAST	,	2	);//D15
-	scu_pinmux(	13	,	 2	,	MD_PLN_FAST	,	2	);//D16
-	scu_pinmux(	13	,	 3	,	MD_PLN_FAST	,	2	);//D17
-	scu_pinmux(	13	,	 4	,	MD_PLN_FAST	,	2	);//D18
-	scu_pinmux(	13	,	 5	,	MD_PLN_FAST	,	2	);//D19
-	scu_pinmux(	13	,	 6	,	MD_PLN_FAST	,	2	);//D20
-	scu_pinmux(	13	,	 7	,	MD_PLN_FAST	,	2	);//D21
-	scu_pinmux(	13	,	 8	,	MD_PLN_FAST	,	2	);//D22
-	scu_pinmux(	13	,	 9	,	MD_PLN_FAST	,	2	);//D23
-	scu_pinmux(	14	,	 5	,	MD_PLN_FAST	,	3	);//D24
-	scu_pinmux(	14	,	 6	,	MD_PLN_FAST	,	3	);//D25
-	scu_pinmux(	14	,	 7	,	MD_PLN_FAST	,	3	);//D26
-	scu_pinmux(	14	,	 8	,	MD_PLN_FAST	,	3	);//D27
-	scu_pinmux(	14	,	 9	,	MD_PLN_FAST	,	3	);//D28
-	scu_pinmux(	14	,	10	,	MD_PLN_FAST	,	3	);//D29
-	scu_pinmux(	14	,	11	,	MD_PLN_FAST	,	3	);//D30
-	scu_pinmux(	14	,	12	,	MD_PLN_FAST	,	3	);//D31
-		
-	scu_pinmux(	 1	,	 3	,	MD_PLN_FAST	,	3	);//OE
-	scu_pinmux(	 1	,	 6	,	MD_PLN_FAST	,	3	);//WE
-	
-	scu_pinmux(	 1	,	 4	,	MD_PLN_FAST	,	3	);//BLS0
-	scu_pinmux(	 6	,	 6	,	MD_PLN_FAST	,	1	);//BLS1	
-	scu_pinmux(	13	,	13	,	MD_PLN_FAST	,	2	);//BLS2
-	scu_pinmux(	13	,	10	,	MD_PLN_FAST	,	2	);//BLS3
-	
-	scu_pinmux(	 1	,	 5	,	MD_PLN_FAST	,	3	);//CS0	
-	scu_pinmux(	 6	,	 3	,	MD_PLN_FAST	,	3	);//CS1
-	scu_pinmux(	13	,	12	,	MD_PLN_FAST	,	2	);//CS2
-	scu_pinmux(	13	,	11	,	MD_PLN_FAST	,	2	);//CS3
-}
-
-#if 0
-static void getIdString(uint16_t idString[11])
-{
-  int i = 0;
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2aaa)) = 0x0055;
-  *(GET_ADDR(0x5555)) = CMD_CFI_QRY;
-
-  for (i = 0; i < 11; i++) {
-    idString[i] = *(GET_ADDR(0x10 + i));
-  }
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2aaa)) = 0x0055;
-  *(GET_ADDR(0x5555)) = CMD_ID_EXIT;
-}
-#endif
-
-static void getGeoInfo(uint16_t info[14])
-{
-  int i = 0;
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2aaa)) = 0x0055;
-  *(GET_ADDR(0x5555)) = CMD_CFI_QRY;
-
-  for (i = 0; i < 14; i++) {
-    info[i] = *(GET_ADDR(0x27 + i));
-  }
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2aaa)) = 0x0055;
-  *(GET_ADDR(0x5555)) = CMD_ID_EXIT;
-}
-
-static uint32_t getProductId(void)
-{
-  uint16_t manuid = 0;
-  uint16_t devid = 0;
-  uint32_t result = 0;
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2aaa)) = 0x0055;
-  *(GET_ADDR(0x5555)) = CMD_SWID;
-
-  manuid = *(GET_ADDR(0x00));
-  devid  = *(GET_ADDR(0x01));
-
-  result = ((manuid << 16) | devid);
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2aaa)) = 0x0055;
-  *(GET_ADDR(0x5555)) = CMD_ID_EXIT;
-
-  return result;
-}
-
-/******************************************************************************
- *
- * Description:
- *    When the SST39VF160x/320x are in the internal Program operation, any 
- *    attempt to read DQ7 will produce the complement of the true data. Once 
- *    the Program operation is completed, DQ7 will produce true data. Note 
- *    that even though DQ7 may have valid data immediately following the 
- *    completion of an internal Write operation, the remaining data outputs 
- *    may still be invalid: valid data on the entire data bus will appear in 
- *    subsequent successive Read cycles after an interval of 1 �s. During 
- *    internal Erase operation, any attempt to read DQ7 will produce a '0'. 
- *    Once the internal Erase operation is completed, DQ7 will produce a '1'.
- *
- * Parameters:
- *    addr      The device address 
- *    data      The original (true) data
- *    timeout   Maximum number of loops to delay
- *
- * Returns:
- *    TRUE if success
- *
- *****************************************************************************/
-static uint16_t check_data_polling(uint32_t addr, uint16_t data, uint32_t timeout)
-{
-  volatile uint16_t *p = (uint16_t*) addr;
-  uint16_t true_data = data & 0x80;
-  int i;
-
-  for (i = 0; i < timeout; i++)
-  {
-    if ( true_data == (*p &0x80) )
-    {
-      TIM_Waitus(1);
-      return (TRUE);
-    } 
-  }  
-  return (FALSE);
-}
-
-/******************************************************************************
- *
- * Description:
- *    During the internal Program or Erase operation, any consecutive attempts 
- *    to read DQ6 will produce alternating �1�s and �0�s, i.e., toggling 
- *    between 1 and 0. When the internal Program or Erase operation is 
- *    completed, the DQ6 bit will stop toggling. The device is then ready 
- *    for the next operation. 
- *
- * Parameters:
- *    addr      The device address 
- *    timeout   Maximum number of loops to delay
- *
- * Returns:
- *    TRUE if success
- *
- *****************************************************************************/
-static uint16_t check_toggle_ready(uint32_t addr, uint32_t timeout)
-{
-  volatile uint16_t *p = (uint16_t*) addr;
-  uint16_t predata, currdata;
-  int i;
-
-  predata = *p & 0x40;
-  for (i = 0; i < timeout; i++)
-  {
-    currdata = *p & 0x40;
-    if (predata == currdata)
-    {
-      TIM_Waitus(1);
-      return (TRUE);
-    }
-    predata = currdata;
-  }
-  return (FALSE);
-}
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-
-
-/******************************************************************************
- *
- * Description:
- *    Initialize the NOR Flash
- *
- *****************************************************************************/
-uint32_t norflash_init()
-{
-  uint32_t prodId = 0;
-
-//   LPC_SC->PCONP      |= 0x00000800;
-
-  LPC_EMC->CONTROL = 0x00000001;
-
-  LPC_EMC->CONFIG  = 0x00000000;
-
-  //Disable Auto-Byte Addressing (on boards designed for LPC24xx)
-  //LPC_SC->SCS |= 0x00000001;
-
-  pinConfig();
-
-  LPC_EMC->STATICCONFIG0   = 0x00000081;
-
-  LPC_EMC->STATICWAITWEN0  = 0x00000003; /* ( n + 1 ) -> 4 clock cycles */
-  LPC_EMC->STATICWAITOEN0  = 0x00000003; /* ( n ) -> 0 clock cycles */
-  LPC_EMC->STATICWAITRD0   = 0x00000006; /* ( n + 1 ) -> 7 clock cycles */
-  LPC_EMC->STATICWAITPAG0  = 0x00000003; /* ( n + 1 ) -> 4 clock cycles */
-  LPC_EMC->STATICWAITWR0   = 0x00000005; /* ( n + 2 ) -> 7 clock cycles */
-  LPC_EMC->STATICWAITTURN0 = 0x00000003; /* ( n + 1 ) -> 4 clock cycles */
-
-#if 0
-  M32(0x40086400) = 3;//SFSP8_0, pin config P8_0, FUNC3, (PUP_DISABLE | PDN_DISABLE | INBUF_DISABLE | FILTER_ENABLE) 
-  M32(0x40086404) = 3;//SFSP8_1, pin config P8_1, FUNC3, (PUP_DISABLE | PDN_DISABLE | INBUF_DISABLE | FILTER_ENABLE) 
-  M32(0x40086408) = 3;//SFSP8_2, pin config P8_2, FUNC3, (PUP_DISABLE | PDN_DISABLE | INBUF_DISABLE | FILTER_ENABLE) 
-  M32(0x4008640C) = 3;//SFSP8_3, pin config P8_3, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) 
-  M32(0x40086410) = 3;//SFSP8_4, pin config P8_4, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) 
-  M32(0x40086414) = 3;//SFSP8_5, pin config P8_5, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) 
-  M32(0x40086418) = 3;//SFSP8_6, pin config P8_6, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) 
-  M32(0x4008641C) = 3;//SFSP8_7, pin config P8_7, FUNC3, (PUP_DISABLE | PDN_DISABLE | SLEWRATE_SLOW | INBUF_DISABLE | FILTER_ENABLE) 
-#endif
-
-  prodId = getProductId();
-
-  if (prodId == ((MAN_ID_SST << 16) | DEV_ID_SST39VF3201)) {
-
-    uint16_t info[14];
-    getGeoInfo(info);
-    chip_info.device_size = 1 << info[0];
-    chip_info.num_sectors = ((info[7] << 8) | info[6]) + 1;
-    chip_info.sector_size = ((info[9] << 8) | info[8]) * 256;
-    chip_info.num_blocks =  ((info[11] << 8) | info[10]) + 1;
-    chip_info.block_size = ((info[13] << 8) | info[12]) * 256;
-
-    return TRUE;
-  }
-
-  return FALSE;
-}
-
-void norflash_getGeometry(geometry_t* geometry)
-{
-  *geometry = chip_info;
-}
-
-
-uint32_t norflash_eraseSector(uint32_t addr)
-{
-  volatile uint16_t* p;
-
-  *(GET_ADDR(0x5555)) 	= 0x00AA;
-  *(GET_ADDR(0x2AAA)) 	= 0x0055;
-  *(GET_ADDR(0x5555)) 	= 0x0080;
-  *(GET_ADDR(0x5555)) 	= 0x00AA;
-  *(GET_ADDR(0x2AAA)) 	= 0x0055;
-
-  p  = (uint16_t*) addr;
-  *p = CMD_ERASE_SECTOR;
-
-  return check_data_polling(addr, 0xffff, 500000);
-}
-
-uint32_t norflash_eraseBlock(uint32_t addr)
-{
-  volatile uint16_t* p;
-
-  *(GET_ADDR(0x5555)) 	= 0x00AA;
-  *(GET_ADDR(0x2AAA)) 	= 0x0055;
-  *(GET_ADDR(0x5555)) 	= 0x0080;
-  *(GET_ADDR(0x5555)) 	= 0x00AA;
-  *(GET_ADDR(0x2AAA)) 	= 0x0055;
-
-  p  = (uint16_t*) addr;
-  *p = CMD_ERASE_BLOCK;
-
-  return check_toggle_ready(addr, 500000);
-}
-
-uint32_t norflash_eraseEntireChip(void)
-{
-  *(GET_ADDR(0x5555)) 	= 0x00AA;
-  *(GET_ADDR(0x2AAA)) 	= 0x0055;
-  *(GET_ADDR(0x5555)) 	= 0x0080;
-  *(GET_ADDR(0x5555)) 	= 0x00AA;
-  *(GET_ADDR(0x2AAA)) 	= 0x0055;
-  *(GET_ADDR(0x5555)) 	= CMD_ERASE_CHIP;
-
-  return check_toggle_ready(NORFLASH_BASE, 500000);
-}
-
-uint32_t norflash_writeWord(uint32_t addr, uint16_t data)
-{
-  volatile uint16_t *p;
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2AAA)) = 0x0055;
-  *(GET_ADDR(0x5555)) = 0x00A0;
-
-  p  = (uint16_t*) addr;
-  *p = data;
-
-  return check_toggle_ready(addr, 500000);
-}
-
-uint32_t norflash_writeBuff(uint32_t addr, uint16_t* data, uint16_t len)
-{
-  uint16_t i;
-  for (i = 0; i < len; i++)
-  {
-    if (!norflash_writeWord(addr, data[i]))
-    {
-      return (FALSE);
-    }
-  }
-  return (TRUE);
-}
-
-/******************************************************************************
- *
- * Description:
- *    Reads the security information from the chip. For an explanation
- *    see the user manual. 
- *
- * Parameters:
- *    SST_SecID   The factory programmed security segment 
- *    User_SecID  The user defined security segment
- *
- *****************************************************************************/
-void norflash_secid_read(uint16_t SST_SecID[8], uint16_t User_SecID[8])
-{
-  uint16_t i;
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2AAA)) = 0x0055;
-  *(GET_ADDR(0x5555)) = 0x0088;
-
-  for (i = 0; i < 7; i++)
-  {
-    SST_SecID[i] = *(GET_ADDR(i));          // SST security is 0x00 - 0x07
-    User_SecID[i] = *(GET_ADDR(i + 0x10)); // User security is 0x10 - 0x17
-  }
-
-  // exit command
-  *(GET_ADDR(0x5555)) = CMD_ID_EXIT;
-}
-
-/******************************************************************************
- *
- * Description:
- *    Checks if the user defined security segment has been locked or not.
- *    See the user manual for more information. 
- *
- * Returns:
- *    TRUE if the segment is locked
- *
- *****************************************************************************/
-uint32_t norflash_secid_getLockStatus(void)
-{
-  uint16_t status;
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2AAA)) = 0x0055;
-  *(GET_ADDR(0x5555)) = 0x0088;
-
-  // read status
-  status = *(GET_ADDR(0xff));
-  status &= 0x0008;
-
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2AAA)) = 0x0055;
-  *(GET_ADDR(0x5555)) = CMD_ID_EXIT;
-
-  if (!status)
-    return TRUE; // locked
-  return FALSE;  // not locked
-}
-
-/******************************************************************************
- *
- * Description:
- *    Lock the user security segment. CANNOT BE UNDONE. 
- *    See the user manual for more information. 
- *
- * Returns:
- *    TRUE if the segment is locked after programming
- *
- *****************************************************************************/
-uint32_t norflash_secid_lockOut()
-{
-  // Code not verified. Use at own risk
-#if 0
-  *(GET_ADDR(0x5555)) = 0x00AA;
-  *(GET_ADDR(0x2AAA)) = 0x0055;
-  *(GET_ADDR(0x5555)) = 0x0085;
-  *(GET_ADDR(0x0   )) = 0x0000;  // Write 0x0000 to any address
-  
-  if (check_toggle_ready(GET_ADDR(0x0), 500000)) 
-  {
-    return norflash_secid_getLockStatus();
-  }
-#endif    
-  return FALSE;  
-}
-
-/******************************************************************************
- *
- * Description:
- *    Writes data to the user security segment (0x0010 - 0x0017). 
- *    See the user manual for more information. 
- *
- * Parameters:
- *    target   Must be in the range 0x10 to 0x17 
- *    data     The data to write
- *    len      The number of words to write
- * 
- * Returns:
- *    TRUE if the programming was successful
- *
- *****************************************************************************/
-uint32_t norflash_secid_writeWord(uint16_t target, uint16_t* data, uint16_t len)
-{
-  // Code not verified. Use at own risk
-#if 0
-  uint16_t i;
-
-  if ((target < 0x10) || (target > 0x17))
-    return FALSE;
-
-  if ((len > 8) || ((target + len) > 0x17))
-    return FALSE;
-
-  for (i = 0; i < len; i++)
-  {
-    *(GET_ADDR(0x5555)) = 0x00AA;
-    *(GET_ADDR(0x2AAA)) = 0x0055;
-    *(GET_ADDR(0x5555)) = 0x00A5;
-    *(GET_ADDR(target + i)) = data;
-
-    data++;
-
-    /* Read the toggle bit to detect end-of-programming for User Sec ID.
-       Do Not use Data# Polling for User_SecID_Word_Program!! */
-    if (!check_toggle_ready(GET_ADDR(target + i), 500000))
-      return FALSE;
-  }
-#endif
-
-  return TRUE;
-}
-
-#endif
diff --git a/hw/bsp/ea4357/oem_base_board/norflash.h b/hw/bsp/ea4357/oem_base_board/norflash.h
deleted file mode 100644
index 11eb675e6..000000000
--- a/hw/bsp/ea4357/oem_base_board/norflash.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __NORFLASH_H
-#define __NORFLASH_H
-
-#define NORFLASH_SIZE           0x400000  /*Bytes or 0x200000 16bit words*/
-#define NORFLASH_BLOCK_SIZE     0x10000   /*Bytes, or 32K 16bit words*/
-#define NORFLASH_BASE           0x1C000000
-
-//16 bit data
-#define GET_ADDR(addr)  (volatile uint16_t *)(NORFLASH_BASE | ((addr) << 1))
-
-typedef struct
-{
-  uint32_t device_size;  /* Device size in bytes */
-  uint32_t num_sectors;  /* Number of sectors */
-  uint32_t sector_size;  /* Sector size in bytes */
-  uint32_t num_blocks;   /* Number of blocks */
-  uint32_t block_size;   /* Block size in bytes */
-} geometry_t;
-
-extern uint32_t norflash_init(void);
-
-extern void norflash_getGeometry(geometry_t* geometry);
-
-extern uint32_t norflash_eraseBlock(uint32_t addr);
-extern uint32_t norflash_eraseSector(uint32_t addr);
-extern uint32_t norflash_eraseEntireChip(void);
-
-extern uint32_t norflash_writeWord(uint32_t addr, uint16_t data);
-extern uint32_t norflash_writeBuff(uint32_t addr, uint16_t* data, uint16_t len);
-
-extern void norflash_secid_read(uint16_t SST_SecID[8], uint16_t user_SecID[8]);
-extern uint32_t norflash_secid_getLockStatus(void);
-extern uint32_t norflash_secid_lockOut(void);
-extern uint32_t norflash_secid_writeWord(uint16_t target, uint16_t* data, uint16_t len);
-
-#endif /* end __NORFLASH_H */
-/****************************************************************************
-**                            End Of File
-*****************************************************************************/
diff --git a/hw/bsp/ea4357/oem_base_board/uda1380.c b/hw/bsp/ea4357/oem_base_board/uda1380.c
deleted file mode 100644
index 654e4eb9a..000000000
--- a/hw/bsp/ea4357/oem_base_board/uda1380.c
+++ /dev/null
@@ -1,159 +0,0 @@
-#include "../../board.h"
-
-#if BOARD == BOARD_EA4357
-
-#include "lpc43xx_i2c.h"
-#include "lpc43xx_scu.h"
-#include "uda1380.h"
-
-//Uda1380 link to I2C0 only
-#define UDA1380_I2C		LPC_I2C0
-
-
-
-/*********************************************************************//**
- * @brief 		Initialize Uda1380
- * @param[in]	i2cClockFreq	I2C clock frequency that Uda1380 operate
- * @param[in] i2sClockFreq  I2S bit clock frequency
- * @return 		None
- **********************************************************************/
-int32_t Uda1380_Init(uint32_t i2cClockFreq, uint32_t i2sClockFreq)
-{
-  int32_t ret;
-	uint8_t clk;
-	
-// 	// Config Pin for I2C_SDA and I2C_SCL of I2C0
-// 	scu_pinmux(	2	,	3	,	MD_PLN_FAST,	FUNC1	);
-// 	scu_pinmux(	2	,	4	,	MD_PLN_FAST,	FUNC1	);
-
-	I2C_Init(UDA1380_I2C, i2cClockFreq);
-
-	/* Enable I2C1 operation */
-	I2C_Cmd(UDA1380_I2C, ENABLE);
-
-	/* Reset */
-	ret = Uda1380_WriteData(UDA1380_REG_L3, 0 );
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-
-    /* Write clock settings */
-	ret = Uda1380_WriteData(UDA1380_REG_I2S,0 );
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-
-   	ret = Uda1380_WriteData(UDA1380_REG_MSTRMUTE,0);
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-	
-	ret = Uda1380_WriteData(UDA1380_REG_MIXSDO,0);
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-
-#if UDA1380_SYSCLK_USED //Use SYSCLK
-	ret = Uda1380_WriteData(UDA1380_REG_EVALCLK, 
-	       EVALCLK_DEC_EN | EVALCLK_DAC_EN | EVALCLK_INT_EN | EVALCLK_DAC_SEL_SYSCLK );
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-	
-	ret = Uda1380_WriteData(UDA1380_REG_PWRCTRL,
-		              PWR_PON_HP_EN | PWR_PON_DAC_EN | PWR_PON_BIAS_EN);
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-	
-#else //Use WSPLL	
-	if(i2sClockFreq >= 6250 && i2sClockFreq < 12500)
-		clk = EVALCLK_WSPLL_SEL6_12K;
-	else if(i2sClockFreq >= 12501 && i2sClockFreq < 25000)  
-		clk = EVALCLK_WSPLL_SEL12_25K;
-	else if(i2sClockFreq >= 25001 && i2sClockFreq < 50000)
-		clk = EVALCLK_WSPLL_SEL25_50K;
-	else if(i2sClockFreq >= 50001 && i2sClockFreq < 100000)
-		clk = EVALCLK_WSPLL_SEL50_100K;
-	else
-		clk= 0;
-		
-	ret = Uda1380_WriteData(UDA1380_REG_EVALCLK, 
-	                 EVALCLK_DEC_EN | EVALCLK_DAC_EN | EVALCLK_INT_EN | EVALCLK_DAC_SEL_WSPLL | clk);
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-	
-	ret = Uda1380_WriteData(UDA1380_REG_PWRCTRL,
-		              PWR_PON_PLL_EN | PWR_PON_HP_EN | PWR_PON_DAC_EN | PWR_PON_BIAS_EN);
-	if(ret != UDA1380_FUNC_OK)
-		return ret;
-#endif
-	return UDA1380_FUNC_OK;
-}
-
-/*********************************************************************//**
- * @brief 		Write data to a register of Uda1380
- * @param[in]	reg	Register address
- * @param[out] data  data value.
- * @return 		None
- **********************************************************************/
-int32_t Uda1380_WriteData(uint8_t reg, uint16_t data)
-{
-	I2C_M_SETUP_Type i2cData;
-	uint8_t i2cBuf[UDA1380_CMD_BUFF_SIZE];
-
-	i2cBuf[0] = reg;
-	i2cBuf[1] = (data >> 8) & 0xFF;
-	i2cBuf[2] = data & 0xFF;
-	
-	i2cData.sl_addr7bit = UDA1380_SLAVE_ADDR;
-	i2cData.tx_length = UDA1380_CMD_BUFF_SIZE;
-    i2cData.tx_data = i2cBuf;
-	i2cData.rx_data = NULL;
-	i2cData.rx_length = 0;
-	i2cData.retransmissions_max = 3;	
-	
-	if (I2C_MasterTransferData(UDA1380_I2C, &i2cData, I2C_TRANSFER_POLLING) == SUCCESS)
-	{
-	    uint16_t dataTmp; 
-	    if(Uda1380_ReadData(reg, &dataTmp) != UDA1380_FUNC_OK) {
-			return UDA1380_FUNC_ERR;
-	    }
-		if(dataTmp != data)
-			return UDA1380_FUNC_ERR;
-		
-		return UDA1380_FUNC_OK;
-	}
-
-	return UDA1380_FUNC_ERR;
-}
-
-
-/*********************************************************************//**
- * @brief 		Read data stored in register of Uda1380
- * @param[in]	reg	Register address
- * @param[out] data  point to the buffer which is used for storing data.
- * @return 		None
- **********************************************************************/
-int32_t Uda1380_ReadData(uint8_t reg, uint16_t *data)
-{
-	I2C_M_SETUP_Type i2cData;
-	uint8_t i2cBuf[UDA1380_CMD_BUFF_SIZE];
-
-	if(data == NULL)
-		return UDA1380_FUNC_ERR;
-
-	i2cBuf[0] = reg;
-	
-	i2cData.sl_addr7bit = UDA1380_SLAVE_ADDR;
-	i2cData.tx_length = 1;
-    i2cData.tx_data = i2cBuf;
-	i2cData.rx_data = &i2cBuf[1];
-	i2cData.rx_length = UDA1380_CMD_BUFF_SIZE - 1;
-	i2cData.retransmissions_max = 3;	
-	
-	if (I2C_MasterTransferData(UDA1380_I2C, &i2cData, I2C_TRANSFER_POLLING) == SUCCESS)
-	{
-	    *data = i2cBuf[1] << 8 | i2cBuf[2];
-		return UDA1380_FUNC_OK;
-	}
-
-	return UDA1380_FUNC_ERR;
-}
-
-#endif
-
diff --git a/hw/bsp/ea4357/oem_base_board/uda1380.h b/hw/bsp/ea4357/oem_base_board/uda1380.h
deleted file mode 100644
index b953cf501..000000000
--- a/hw/bsp/ea4357/oem_base_board/uda1380.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef _UDA1380_H_
-#define _UDA1380_H_
-
-#include "lpc_types.h"
-
-#define UDA1380_SYSCLK_USED 0
-#define UDA1380_SLAVE_ADDR  0x1A
-#define UDA1380_CMD_BUFF_SIZE 3
-
-/** UDA1380 Registers */
-#define UDA1380_REG_EVALCLK	0x00
-#define UDA1380_REG_I2S		0x01
-#define UDA1380_REG_PWRCTRL	0x02
-#define UDA1380_REG_ANAMIX	0x03
-#define UDA1380_REG_HEADAMP	0x04
-#define UDA1380_REG_MSTRVOL	0x10
-#define UDA1380_REG_MIXVOL	0x11
-#define UDA1380_REG_MODEBBT	0x12
-#define UDA1380_REG_MSTRMUTE  0x13
-#define UDA1380_REG_MIXSDO	  0x14
-#define UDA1380_REG_DECVOL	  0x20
-#define UDA1380_REG_PGA		  0x21
-#define UDA1380_REG_ADC		  0x22
-#define UDA1380_REG_AGC		  0x23
-#define UDA1380_REG_L3		  0x7f
-#define UDA1380_REG_HEADPHONE 0x18
-#define UDA1380_REG_DEC		  0x28
-
-// UDA1380_REG_EVALCLK bit defines
-#define EVALCLK_ADC_EN           0x0800  // Enable ADC clock
-#define EVALCLK_DEC_EN           0x0400  // Enable decimator clock
-#define EVALCLK_DAC_EN           0x0200  // Enable DAC clock
-#define EVALCLK_INT_EN           0x0100  // Enable interpolator clock
-#define EVALCLK_ADC_SEL_WSPLL   0x0020  // Select SYSCLK input for ADC clock
-#define EVALCLK_ADC_SEL_SYSCLK    0x0000  // Select WSPLL clock for ADC clock
-#define EVALCLK_DAC_SEL_WSPLL   0x0010  // Select SYSCLK input for DAC clock
-#define EVALCLK_DAC_SEL_SYSCLK    0x0000  // Select WSPLL clock for DAC clock
-#define EVALCLK_SYSDIV_SEL(n)    ((n) << 2) // System clock input divider select
-#define EVALCLK_WSPLL_SEL6_12K   0x0000  // WSPLL input freq selection = 6.25 to 12.5K
-#define EVALCLK_WSPLL_SEL12_25K  0x0001  // WSPLL input freq selection = 12.5K to 25K
-#define EVALCLK_WSPLL_SEL25_50K  0x0002  // WSPLL input freq selection = 25K to 50K
-#define EVALCLK_WSPLL_SEL50_100K 0x0003  // WSPLL input freq selection = 50K to 100K
-
-// UDA1380_REG_I2S
-#define I2S_SFORI_I2S 0x0000
-#define I2S_SFORI_LSB16 0x0100
-#define I2S_SFORI_LSB18 0x0200
-#define I2S_SFORI_LSB20 0x0300
-#define I2S_SFORI_MSB 0x0500
-#define I2S_SFORI_MASK 0x0700
-#define I2S_SFORO_I2S 0x0000
-#define I2S_SFORO_LSB16 0x0001
-#define I2S_SFORO_LSB18 0x0002
-#define I2S_SFORO_LSB20 0x0003
-#define I2S_SFORO_LSB24 0x0004
-#define I2S_SFORO_MSB 0x0005
-#define I2S_SFORO_MASK 0x0007
-#define I2S_SEL_SOURCE 0x0040
-#define I2S_SIM 0x0010
-
-// UDA1380_REG_PWRCTRL bit defines 
-#define PWR_PON_PLL_EN           0x8000  // WSPLL enable
-#define PWR_PON_HP_EN            0x2000  // Headphone driver enable
-#define PWR_PON_DAC_EN           0x0400  // DAC power enable
-#define PWR_PON_BIAS_EN          0x0100  // Power on bias enable (for ADC, AVC, and FSDAC)
-#define PWR_EN_AVC_EN            0x0080  // Analog mixer enable
-#define PWR_PON_AVC_EN           0x0040  // Analog mixer power enable
-#define PWR_EN_LNA_EN            0x0010  // LNA and SDC power enable
-#define PWR_EN_PGAL_EN           0x0008  // PGA left power enable
-#define PWR_EN_ADCL_EN           0x0004  // ADC left power enable
-#define PWR_EN_PGAR_EN           0x0002  // PGA right power enable
-#define PWR_EN_ADCR_EN           0x0001  // ADC right power enable
-
-// UDA1380_REG_MSTRMUTE bit defines
-#define MSTRMUTE_MTM_MUTE_EN     0x4000  // Master mute enable
-#define MSRTMUTE_CHANNEL2_MUTE_EN 0x0800 
-#define MSRTMUTE_CHANNEL1_MUTE_EN 0x0008
-
-
-// UDA1380_REG_MODEBBT bit defines
-#define MODEBBT_BOOST_FLAT       0x0000  // Bits for selecting flat boost
-#define MODEBBT_BOOST_FULL       0xC000  // Bits for selecting maximum boost
-#define MODEBBT_BOOST_MASK       0xC000  // Bits for selecting boost mask
-
-#define UDA1380_FUNC_OK          0
-#define UDA1380_FUNC_ERR         -1
-
-int32_t Uda1380_Init(uint32_t i2cClockFreq, uint32_t i2sClockFreq);
-int32_t Uda1380_WriteData(uint8_t reg, uint16_t data);
-int32_t Uda1380_ReadData(uint8_t reg, uint16_t *data);
-
-
-#endif /* _UDA1380_H_ */