diff options
| author | Ha Thach <[email protected]> | 2024-04-08 12:30:25 +0700 |
|---|---|---|
| committer | GitHub <[email protected]> | 2024-04-08 12:30:25 +0700 |
| commit | af1346c74878aaec8549483ae6371614f550c863 (patch) | |
| tree | 7cb60fe7130e66839019bc43bf7c7385f926c155 | |
| parent | ffab7bf9dde0c0e960feeb5c1264823ca5a0ced7 (diff) | |
| parent | d6d8acad90c8a1578dcbd886154fbb3f2bd1a363 (diff) | |
Merge pull request #2466 from wavenumber-eng/MCX
TinyUSB stack ported to MCXA and MXCN freedom boards.
30 files changed, 1919 insertions, 64 deletions
diff --git a/README.rst b/README.rst index fe2417451..8c3145d33 100644 --- a/README.rst +++ b/README.rst @@ -139,7 +139,7 @@ Following CPUs are supported, check out `Supported Devices`_ for comprehensive l | +---------+--------------------------------------------------+ | | LPC | 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 | | +---------+--------------------------------------------------+ -| | MCX | N9 | +| | MCX | A15, N9 | +--------------+---------+--------------------------------------------------+ | Raspberry Pi | RP2040 | +--------------+-----+------------------------------------------------------+ diff --git a/examples/build_system/cmake/cpu/cortex-m23.cmake b/examples/build_system/cmake/cpu/cortex-m23.cmake index 3093dc99a..c7ce1d242 100644 --- a/examples/build_system/cmake/cpu/cortex-m23.cmake +++ b/examples/build_system/cmake/cpu/cortex-m23.cmake @@ -5,13 +5,13 @@ if (TOOLCHAIN STREQUAL "gcc") -mfloat-abi=soft ) - set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + set(FREERTOS_PORT GCC_ARM_CM23_NTZ_NONSECURE CACHE INTERNAL "") elseif (TOOLCHAIN STREQUAL "iar") set(TOOLCHAIN_COMMON_FLAGS --cpu cortex-m23 ) - set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") + set(FREERTOS_PORT IAR_ARM_CM23_NTZ_NONSECURE CACHE INTERNAL "") endif () diff --git a/examples/build_system/cmake/cpu/cortex-m33-nodsp-nofp.cmake b/examples/build_system/cmake/cpu/cortex-m33-nodsp-nofp.cmake new file mode 100644 index 000000000..01e6b979a --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m33-nodsp-nofp.cmake @@ -0,0 +1,17 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m33+nodsp + -mfloat-abi=soft + ) + + set(FREERTOS_PORT GCC_ARM_CM33_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m33+nodsp + ) + + set(FREERTOS_PORT IAR_ARM_CM33_NTZ_NONSECURE CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-m33.cmake b/examples/build_system/cmake/cpu/cortex-m33.cmake index 7ebaf1748..94c29099d 100644 --- a/examples/build_system/cmake/cpu/cortex-m33.cmake +++ b/examples/build_system/cmake/cpu/cortex-m33.cmake @@ -14,6 +14,6 @@ elseif (TOOLCHAIN STREQUAL "iar") --fpu VFPv5-SP ) - set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") + set(FREERTOS_PORT IAR_ARM_CM33_NTZ_NONSECURE CACHE INTERNAL "") endif () diff --git a/examples/build_system/make/cpu/cortex-m33-nodsp-nofp.mk b/examples/build_system/make/cpu/cortex-m33-nodsp-nofp.mk new file mode 100644 index 000000000..c65f24376 --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m33-nodsp-nofp.mk @@ -0,0 +1,16 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m33+nodsp \ + -mfloat-abi=soft \ + +else ifeq ($(TOOLCHAIN),iar) + CFLAGS += \ + --cpu cortex-m33+nodsp \ + + ASFLAGS += \ + --cpu cortex-m33+nodsp \ + +endif + +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index 6f10a7ab0..5bf990bab 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -49,7 +49,11 @@ /* Cortex M23/M33 port configuration. */ #define configENABLE_MPU 0 -#define configENABLE_FPU 1 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif #define configENABLE_TRUSTZONE 0 #define configMINIMAL_SECURE_STACK_SIZE (1024) diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake new file mode 100644 index 000000000..7cd8991e6 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake @@ -0,0 +1,21 @@ +set(MCU_VARIANT MCXA153) +set(MCU_CORE MCXA153) + +set(JLINK_DEVICE MCXA153_M33) +set(PYOCD_TARGET MCXA153) +set(NXPLINK_DEVICE MCXA153:MCXA153) + +set(PORT 0) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CPU_MCXA153VLH + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + CFG_EXAMPLE_VIDEO_READONLY + ) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c + ) +endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.h b/hw/bsp/mcx/boards/frdm_mcxa153/board.h new file mode 100644 index 000000000..e207d89d9 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.h @@ -0,0 +1,64 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_GPIO GPIO3 +#define LED_CLK kCLOCK_GateGPIO3 +#define LED_PIN 12 // red +#define LED_STATE_ON 0 + +// ISP button (Dummy, use unused pin +#define BUTTON_GPIO GPIO3 +#define BUTTON_CLK kCLOCK_GateGPIO3 +#define BUTTON_PIN 29 //sw2 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV LPUART0 + +static inline void board_uart_init_clock(void) { + /* attach 12 MHz clock to LPUART0 (debug console) */ + CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u); + CLOCK_AttachClk(kFRO12M_to_LPUART0); + + RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn); +} + +// XTAL +#define XTAL0_CLK_HZ (24 * 1000 * 1000U) + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk new file mode 100644 index 000000000..af8416d8e --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk @@ -0,0 +1,14 @@ +MCU_VARIANT = MCXA153 +MCU_CORE = MCXA153 +PORT = 0 + +CPU_CORE = cortex-m33-nodsp-nofp +CFLAGS += \ + -DCPU_MCXA153VLH \ + -DCFG_TUSB_MCU=OPT_MCU_MCXA15 \ + +JLINK_DEVICE = MCXA153 +PYOCD_TARGET = MCXA153 + +# flash using pyocd +flash: flash-jlink diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c new file mode 100644 index 000000000..f16bc51f6 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c @@ -0,0 +1,468 @@ +/* + * Copyright 2023 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to setup clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + * + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v12.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 0.13.0 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_clock.h" +#include "clock_config.h" +#include "fsl_spc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +//uint32_t SystemCoreClock; + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockFRO96M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CPU_clock.outFreq, value: 12 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: MAIN_clock.outFreq, value: 12 MHz} +- {id: Slow_clock.outFreq, value: 3 MHz} +- {id: System_clock.outFreq, value: 12 MHz} +settings: +- {id: SCGMode, value: SIRC} +- {id: FRO_HF_PERIPHERALS_EN_CFG, value: Disabled} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SCG.SCSSEL.sel, value: SCG.SIRC} +- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO24M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 24 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 6 MHz} +- {id: System_clock.outFreq, value: 24 MHz} +settings: +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +void BOARD_BootClockFRO24M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO48M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 12 MHz} +- {id: System_clock.outFreq, value: 48 MHz} +settings: +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +void BOARD_BootClockFRO48M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO64M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 64 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} +- {id: FRO_HF_clock.outFreq, value: 64 MHz} +- {id: MAIN_clock.outFreq, value: 64 MHz} +- {id: Slow_clock.outFreq, value: 16 MHz} +- {id: System_clock.outFreq, value: 64 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} +sources: +- {id: SCG.FIRC.outFreq, value: 64 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +void BOARD_BootClockFRO64M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO96M +called_from_default_init: true +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 96 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} +- {id: FRO_HF_clock.outFreq, value: 96 MHz} +- {id: MAIN_clock.outFreq, value: 96 MHz} +- {id: Slow_clock.outFreq, value: 24 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: CLKOUTDIV_HALT, value: Enable} +- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} +sources: +- {id: SCG.FIRC.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +void BOARD_BootClockFRO96M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; +} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h new file mode 100644 index 000000000..aae811052 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h @@ -0,0 +1,170 @@ +/* + * Copyright 2023 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO24M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO48M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO64M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c new file mode 100644 index 000000000..cc8f56e63 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c @@ -0,0 +1,159 @@ +/* + * Copyright 2023 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v14.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 0.14.3 +pin_labels: +- {pin_num: '38', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, label: LED_RED, identifier: LED_RED} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_port.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'false', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) +{ + RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn); + RESET_PeripheralReset(kPORT0_RST_SHIFT_RSTn); + CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u); + CLOCK_AttachClk(kFRO12M_to_LPUART0); + + /* write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + + /* Write to GPIO3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GateGPIO3); + /* Write to PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + const port_pin_config_t port3_12_pin38_config = {/* Internal pull-up/down resistor is disabled */ + kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + kPORT_NormalDriveStrength, + /* Pin is configured as P3_12 */ + kPORT_MuxAlt0, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT3_12 (pin 38) is configured as P3_12 */ + PORT_SetPinConfig(PORT3, 12U, &port3_12_pin38_config); + + const port_pin_config_t port0_2_pin51_config = {/* Internal pull-up resistor is enabled */ + kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_RXD */ + kPORT_MuxAlt2, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT0_2 (pin 51) is configured as LPUART0_RXD */ + PORT_SetPinConfig(PORT0, 2U, &port0_2_pin51_config); + + const port_pin_config_t port0_3_pin52_config = {/* Internal pull-up resistor is enabled */ + kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_TXD */ + kPORT_MuxAlt2, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ + PORT_SetPinConfig(PORT0, 3U, &port0_3_pin52_config); + +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h new file mode 100644 index 000000000..06b6fdee9 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h @@ -0,0 +1,47 @@ +/* + * Copyright 2022 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake b/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake new file mode 100644 index 000000000..8c3280743 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake @@ -0,0 +1,21 @@ +set(MCU_VARIANT MCXN947) +set(MCU_CORE MCXN947_cm33_core0) + +set(JLINK_DEVICE MCXN947_M33_0) +set(PYOCD_TARGET MCXN947) +set(NXPLINK_DEVICE MCXN947:MCXN947) + +set(PORT 1) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CPU_MCXN947VDF_cm33_core0 + BOARD_TUD_RHPORT=${PORT} + # port 0 is fullspeed, port 1 is highspeed + BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> + ) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c + ) +endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.h b/hw/bsp/mcx/boards/frdm_mcxn947/board.h new file mode 100644 index 000000000..acb73363f --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.h @@ -0,0 +1,66 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_GPIO GPIO0 +#define LED_CLK kCLOCK_Gpio0 +#define LED_PIN 10 // red +#define LED_STATE_ON 0 + +// WAKE button (Dummy, use unused pin +#define BUTTON_GPIO GPIO0 +#define BUTTON_CLK kCLOCK_Gpio0 +#define BUTTON_PIN 23 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV LPUART4 + +static inline void board_uart_init_clock(void) { + /* attach FRO 12M to FLEXCOMM4 */ + CLOCK_SetClkDiv(kCLOCK_DivFlexcom4Clk, 1u); + CLOCK_AttachClk(kFRO12M_to_FLEXCOMM4); + RESET_ClearPeripheralReset(kFC4_RST_SHIFT_RSTn); +} + +//#define UART_RX_PINMUX 0, 24, IOCON_PIO_DIG_FUNC1_EN +//#define UART_TX_PINMUX 0, 25, IOCON_PIO_DIG_FUNC1_EN + +// XTAL +#define XTAL0_CLK_HZ (24 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.mk b/hw/bsp/mcx/boards/frdm_mcxn947/board.mk new file mode 100644 index 000000000..22fefd79b --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.mk @@ -0,0 +1,14 @@ +MCU_VARIANT = MCXN947 +MCU_CORE = MCXN947_cm33_core0 +PORT ?= 1 + +CPU_CORE = cortex-m33 +CFLAGS += \ + -DCPU_MCXN947VDF_cm33_core0 \ + -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ + +JLINK_DEVICE = MCXN947_M33_0 +PYOCD_TARGET = MCXN947 + +# flash using pyocd +flash: flash-jlink diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.c new file mode 100644 index 000000000..37d2b4dfc --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.c @@ -0,0 +1,338 @@ +/* + * Copyright 2022 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to setup clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + * + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v10.0 +processor: MCXN947 +package_id: MCXN947VDF +mcu_data: ksdk2_0 +processor_version: 0.12.3 +board: MCX-N9XX-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "clock_config.h" +#include "fsl_clock.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +// extern uint32_t SystemCoreClock; + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockPLL150M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: CLK_144M_clock.outFreq, value: 144 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: MAIN_clock.outFreq, value: 12 MHz} +- {id: Slow_clock.outFreq, value: 3 MHz} +- {id: System_clock.outFreq, value: 12 MHz} +- {id: gdet_clock.outFreq, value: 48 MHz} +- {id: trng_clock.outFreq, value: 48 MHz} +settings: +- {id: SCGMode, value: SIRC} +- {id: SCG.SCSSEL.sel, value: SCG.SIRC} +- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} +- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a} +- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ + /*!< Enable SCG clock */ + CLOCK_EnableClock(kCLOCK_Scg); + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U); /*!< Set AHBCLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF48M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFROHF48M +outputs: +- {id: CLK_144M_clock.outFreq, value: 144 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 12 MHz} +- {id: System_clock.outFreq, value: 48 MHz} +- {id: gdet_clock.outFreq, value: 48 MHz} +- {id: trng_clock.outFreq, value: 48 MHz} +settings: +- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK} +- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK} +- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a} +- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFROHF48M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFROHF48M configuration + ******************************************************************************/ +void BOARD_BootClockFROHF48M(void) +{ + /*!< Enable SCG clock */ + CLOCK_EnableClock(kCLOCK_Scg); + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U); /*!< Set AHBCLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFROHF48M_CORE_CLOCK; +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF144M ******************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFROHF144M +outputs: +- {id: CLK_144M_clock.outFreq, value: 144 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_clock.outFreq, value: 144 MHz} +- {id: MAIN_clock.outFreq, value: 144 MHz} +- {id: Slow_clock.outFreq, value: 18 MHz} +- {id: System_clock.outFreq, value: 72 MHz} +- {id: gdet_clock.outFreq, value: 48 MHz} +- {id: trng_clock.outFreq, value: 48 MHz} +settings: +- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true} +- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK} +- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK} +- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a} +- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a} +sources: +- {id: SCG.FIRC.outFreq, value: 144 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFROHF144M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFROHF144M configuration + ******************************************************************************/ +void BOARD_BootClockFROHF144M(void) +{ + /*!< Enable SCG clock */ + CLOCK_EnableClock(kCLOCK_Scg); + + CLOCK_SetupFROHFClocking(144000000U); /*!< Enable FRO HF(144MHz) output */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 2U); /*!< Set AHBCLKDIV divider to value 2 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFROHF144M_CORE_CLOCK; +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL150M +called_from_default_init: true +outputs: +- {id: CLK_144M_clock.outFreq, value: 144 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 150 MHz} +- {id: PLL0_CLK_clock.outFreq, value: 150 MHz} +- {id: Slow_clock.outFreq, value: 37.5 MHz} +- {id: System_clock.outFreq, value: 150 MHz} +- {id: gdet_clock.outFreq, value: 48 MHz} +- {id: trng_clock.outFreq, value: 48 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: RunPowerMode, value: OD} +- {id: SCGMode, value: PLL0} +- {id: SCG.PLL0M_MULT.scale, value: '50', locked: true} +- {id: SCG.PLL0SRCSEL.sel, value: SCG.FIRC_48M} +- {id: SCG.PLL0_NDIV.scale, value: '8', locked: true} +- {id: SCG.SCSSEL.sel, value: SCG.PLL0_CLK} +- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK} +- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK} +- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a} +- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +void BOARD_BootClockPLL150M(void) +{ + /*!< Enable SCG clock */ + CLOCK_EnableClock(kCLOCK_Scg); + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + /*!< Set up PLL0 */ + const pll_setup_t pll0Setup = { + .pllctrl = SCG_APLLCTRL_SOURCE(1U) | SCG_APLLCTRL_SELI(27U) | SCG_APLLCTRL_SELP(13U), + .pllndiv = SCG_APLLNDIV_NDIV(8U), + .pllpdiv = SCG_APLLPDIV_PDIV(1U), + .pllmdiv = SCG_APLLMDIV_MDIV(50U), + .pllRate = 150000000U + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + CLOCK_SetPll0MonitorMode(kSCG_Pll0MonitorDisable); /* Pll0 Monitor is disabled */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U); /*!< Set AHBCLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK; +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL100M +outputs: +- {id: CLK_144M_clock.outFreq, value: 144 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CLK_IN_clock.outFreq, value: 24 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: MAIN_clock.outFreq, value: 100 MHz} +- {id: PLL1_CLK_clock.outFreq, value: 100 MHz} +- {id: Slow_clock.outFreq, value: 25 MHz} +- {id: System_clock.outFreq, value: 100 MHz} +- {id: gdet_clock.outFreq, value: 48 MHz} +- {id: trng_clock.outFreq, value: 48 MHz} +settings: +- {id: PLL1_Mode, value: Normal} +- {id: SCGMode, value: PLL1} +- {id: SCG.PLL1M_MULT.scale, value: '100', locked: true} +- {id: SCG.PLL1_NDIV.scale, value: '6', locked: true} +- {id: SCG.PLL1_PDIV.scale, value: '4', locked: true} +- {id: SCG.SCSSEL.sel, value: SCG.PLL1_CLK} +- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} +- {id: SCG_SOSCCSR_SOSCEN_CFG, value: Enabled} +- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a} +- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a} +sources: +- {id: SCG.SOSC.outFreq, value: 24 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +void BOARD_BootClockPLL100M(void) +{ + /*!< Enable SCG clock */ + CLOCK_EnableClock(kCLOCK_Scg); + + CLOCK_SetupExtClocking(24000000U); + CLOCK_SetSysOscMonitorMode(kSCG_SysOscMonitorDisable); /* System OSC Clock Monitor is disabled */ + + /*!< Set up PLL1 */ + const pll_setup_t pll1Setup = { + .pllctrl = SCG_SPLLCTRL_SOURCE(0U) | SCG_SPLLCTRL_SELI(53U) | SCG_SPLLCTRL_SELP(26U), + .pllndiv = SCG_SPLLNDIV_NDIV(6U), + .pllpdiv = SCG_SPLLPDIV_PDIV(2U), + .pllmdiv = SCG_SPLLMDIV_MDIV(100U), + .pllRate = 100000000U + }; + CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */ + CLOCK_SetPll1MonitorMode(kSCG_Pll1MonitorDisable); /* Pll1 Monitor is disabled */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U); /*!< Set AHBCLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK; +} diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.h new file mode 100644 index 000000000..c238a0423 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.h @@ -0,0 +1,177 @@ +/* + * Copyright 2022 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal frequency in Hz */ +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ +#define BOARD_BOOTCLOCKFRO12M_ROSC_CLOCK 0U /*!< ROSC clock frequency: 0Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF48M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFROHF48M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFROHF48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ +#define BOARD_BOOTCLOCKFROHF48M_ROSC_CLOCK 0U /*!< ROSC clock frequency: 0Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFROHF48M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFROHF48M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF144M ******************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFROHF144M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFROHF144M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */ +#define BOARD_BOOTCLOCKFROHF144M_ROSC_CLOCK 0U /*!< ROSC clock frequency: 0Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFROHF144M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFROHF144M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 150000000U /*!< Core clock frequency: 150000000Hz */ +#define BOARD_BOOTCLOCKPLL150M_ROSC_CLOCK 0U /*!< ROSC clock frequency: 0Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL150M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */ +#define BOARD_BOOTCLOCKPLL100M_ROSC_CLOCK 0U /*!< ROSC clock frequency: 0Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockPLL100M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.c new file mode 100644 index 000000000..c33790ac5 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.c @@ -0,0 +1,143 @@ +/* + * Copyright 2022 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v12.0 +processor: MCXN947 +package_id: MCXN947VDF +mcu_data: ksdk2_0 +processor_version: 0.12.3 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_port.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: A1, peripheral: LPFlexcomm4, signal: LPFLEXCOMM_P0, pin_signal: PIO1_8/WUU0_IN10/LPTMR1_ALT3/TRACE_DATA0/FC4_P0/FC5_P4/CT_INP8/SCT0_OUT2/FLEXIO0_D16/PLU_OUT0/ENET0_TXD2/I3C1_SDA/TSI0_CH17/ADC1_A8, + slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, pull_value: low, input_buffer: enable, + invert_input: normal} + - {pin_num: B1, peripheral: LPFlexcomm4, signal: LPFLEXCOMM_P1, pin_signal: PIO1_9/TRACE_DATA1/FC4_P1/FC5_P5/CT_INP9/SCT0_OUT3/FLEXIO0_D17/PLU_OUT1/ENET0_TXD3/I3C1_SCL/TSI0_CH18/ADC1_A9, + slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal} + - {pin_num: B7, peripheral: GPIO0, signal: 'GPIO, 23', pin_signal: PIO0_23/WUU0_IN5/EWM0_OUT_b/FC1_P3/CT_INP3/FLEXIO0_D7/ADC0_A15/CMP2_IN2, direction: INPUT, slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) +{ + /* Enables the clock for PORT0: Enables clock */ + CLOCK_EnableClock(kCLOCK_Port0); + + /* Enables the clock for PORT1: Enables clock */ + CLOCK_EnableClock(kCLOCK_Port1); + + + const port_pin_config_t port1_8_pinA1_config = {/* Internal pull-up/down resistor is disabled */ + kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Pin is configured as FC4_P0 */ + kPORT_MuxAlt2, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT1_8 (pin A1) is configured as FC4_P0 */ + PORT_SetPinConfig(PORT1, 8U, &port1_8_pinA1_config); + + const port_pin_config_t port1_9_pinB1_config = {/* Internal pull-up/down resistor is disabled */ + kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Pin is configured as FC4_P1 */ + kPORT_MuxAlt2, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT1_9 (pin B1) is configured as FC4_P1 */ + PORT_SetPinConfig(PORT1, 9U, &port1_9_pinB1_config); + + const port_pin_config_t SW2 = {/* Internal pull-up/down resistor is disabled */ + kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Pin is configured as PIO0_23 */ + kPORT_MuxAlt0, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT0_23 (pin B7) is configured as PIO0_23 */ + PORT_SetPinConfig(PORT0, 23U, &SW2); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.h new file mode 100644 index 000000000..40968c275 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.h @@ -0,0 +1,51 @@ +/* + * Copyright 2022 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.mk b/hw/bsp/mcx/boards/mcxn947brk/board.mk index aaad5e73e..22fefd79b 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.mk +++ b/hw/bsp/mcx/boards/mcxn947brk/board.mk @@ -2,7 +2,10 @@ MCU_VARIANT = MCXN947 MCU_CORE = MCXN947_cm33_core0 PORT ?= 1 -CFLAGS += -DCPU_MCXN947VDF_cm33_core0 +CPU_CORE = cortex-m33 +CFLAGS += \ + -DCPU_MCXN947VDF_cm33_core0 \ + -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ JLINK_DEVICE = MCXN947_M33_0 PYOCD_TARGET = MCXN947 diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index 8672ca63f..cc675a49d 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -33,6 +33,10 @@ #include "pin_mux.h" #include "clock_config.h" +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + #ifdef BOARD_TUD_RHPORT #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) #else @@ -46,43 +50,49 @@ #endif //--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -//--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USB0_FS_IRQHandler(void) -{ + +#if CFG_TUSB_MCU == OPT_MCU_MCXN9 +void USB0_FS_IRQHandler(void) { tud_int_handler(0); } -void USB1_HS_IRQHandler(void) -{ +void USB1_HS_IRQHandler(void) { tud_int_handler(1); } -void board_init(void) -{ +#elif CFG_TUSB_MCU == OPT_MCU_MCXA15 + +void USB0_IRQHandler(void) { + tud_int_handler(0); +} + +#endif + + +void board_init(void) { BOARD_InitPins(); BOARD_InitBootClocks(); CLOCK_SetupExtClocking(XTAL0_CLK_HZ); +#if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS +#elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB1_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + #if CFG_TUSB_MCU == OPT_MCU_MCXN9 + NVIC_SetPriority(USB0_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB1_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + #else + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + #endif #endif // LED CLOCK_EnableClock(LED_CLK); - gpio_pin_config_t led_config = { - kGPIO_DigitalOutput, - 0, - }; - GPIO_PinInit(LED_GPIO,LED_PIN, &led_config); + gpio_pin_config_t led_config = {kGPIO_DigitalOutput, 0}; + GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); board_led_write(0); #ifdef NEOPIXEL_PIN @@ -100,7 +110,7 @@ void board_init(void) // Button #ifdef BUTTON_GPIO CLOCK_EnableClock(BUTTON_CLK); - gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; + gpio_pin_config_t const button_config = {kGPIO_DigitalInput, 0}; GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); #endif @@ -115,8 +125,8 @@ void board_init(void) lpuart_config_t uart_config; LPUART_GetDefaultConfig(&uart_config); uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; + uart_config.enableTx = true; + uart_config.enableRx = true; LPUART_Init(UART_DEV, &uart_config, 12000000u); #endif @@ -126,13 +136,18 @@ void board_init(void) #if PORT_SUPPORT_DEVICE(0) // Port0 is Full Speed + #if CFG_TUSB_MCU == OPT_MCU_MCXA15 + RESET_PeripheralReset(kUSB0_RST_SHIFT_RSTn); + #elif CFG_TUSB_MCU == OPT_MCU_MCXN9 CLOCK_AttachClk(kCLK_48M_to_USB0); CLOCK_EnableClock(kCLOCK_Usb0Ram); CLOCK_EnableClock(kCLOCK_Usb0Fs); + #endif + CLOCK_EnableUsbfsClock(); #endif -#if PORT_SUPPORT_DEVICE(1) +#if PORT_SUPPORT_DEVICE(1) && (CFG_TUSB_MCU == OPT_MCU_MCXN9) // Port1 is High Speed // Power @@ -191,9 +206,8 @@ void board_init(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +void board_led_write(bool state) { + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); #ifdef NEOPIXEL_PIN if (state) { @@ -207,23 +221,21 @@ void board_led_write(bool state) #endif } -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { #ifdef BUTTON_GPIO return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); #endif } -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; return 0; } -int board_uart_write(void const * buf, int len) -{ +int board_uart_write(void const* buf, int len) { #ifdef UART_DEV - LPUART_WriteBlocking(UART_DEV, (uint8_t const *) buf, len); + LPUART_WriteBlocking(UART_DEV, (uint8_t const*) buf, len); return len; #else (void) buf; (void) len; @@ -233,13 +245,13 @@ int board_uart_write(void const * buf, int len) #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ + +void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) -{ +uint32_t board_millis(void) { return system_ticks; } + #endif diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 13d1d44ef..c8591b569 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -11,11 +11,17 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) - -set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") +if (MCU_VARIANT STREQUAL "MCXA153") + set(CMAKE_SYSTEM_PROCESSOR cortex-m33-nodsp-nofp CACHE INTERNAL "System Processor") + set(FAMILY_MCUS MCXA15 CACHE INTERNAL "") +elseif (MCU_VARIANT STREQUAL "MCXN947") + set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") + set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") +else() + message(FATAL_ERROR "MCU_VARIANT not supported") +endif() +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) #------------------------------------ # BOARD_TARGET @@ -31,12 +37,23 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c + # mcu ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c ) + + if (${FAMILY_MCUS} STREQUAL "MCXN9") + target_sources(${BOARD_TARGET} PRIVATE + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c + ) + elseif(${FAMILY_MCUS} STREQUAL "MCXA15") + target_sources(${BOARD_TARGET} PRIVATE + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_spc.c + ) + endif() + # target_compile_definitions(${BOARD_TARGET} PUBLIC # ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -93,7 +110,12 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MCXN9 ${RTOS}) + if (${FAMILY_MCUS} STREQUAL "MCXN9") + family_add_tinyusb(${TARGET} OPT_MCU_MCXN9 ${RTOS}) + elseif(${FAMILY_MCUS} STREQUAL "MCXA15") + family_add_tinyusb(${TARGET} OPT_MCU_MCXA15 ${RTOS}) + endif() + target_sources(${TARGET}-tinyusb PUBLIC # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS ${TOP}/src/portable/chipidea/$<IF:${PORT},ci_hs/dcd_ci_hs.c,ci_fs/dcd_ci_fs.c> diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index 526effdfb..58149fb8d 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -4,14 +4,12 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk -CPU_CORE ?= cortex-m33 # Default to Highspeed PORT1 PORT ?= 1 CFLAGS += \ -flto \ - -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ -DBOARD_TUD_RHPORT=$(PORT) \ # mcu driver cause following warnings @@ -38,9 +36,18 @@ SRC_C += \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_gpio.c \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_common_arm.c \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpflexcomm.c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpuart.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_common_arm.c \ + +# fsl_lpflexcomm for MCXN9 +ifeq ($(MCU_VARIANT), MCXN947) + SRC_C += $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpflexcomm.c +endif + +# fsl_spc for MCXNA15 +ifeq ($(MCU_VARIANT), MCXA153) + SRC_C += $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_spc.c +endif INC += \ $(TOP)/$(BOARD_PATH) \ diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h index 57ed3a9e4..b132e2559 100644 --- a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -64,7 +64,11 @@ /* Cortex M23/M33 port configuration. */ #define configENABLE_MPU 0 -#define configENABLE_FPU 1 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif #define configENABLE_TRUSTZONE 0 #define configMINIMAL_SECURE_STACK_SIZE (1024) diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 308ee713c..688b9a352 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -100,6 +100,13 @@ #define TUP_DCD_ENDPOINT_MAX 8 #define TUP_RHPORT_HIGHSPEED 1 +#elif TU_CHECK_MCU(OPT_MCU_MCXA15) + // USB0 is chipidea FS + #define TUP_USBIP_CHIPIDEA_FS + #define TUP_USBIP_CHIPIDEA_FS_MCX + + #define TUP_DCD_ENDPOINT_MAX 16 + #elif TU_CHECK_MCU(OPT_MCU_MIMXRT1XXX) #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI diff --git a/src/portable/chipidea/ci_fs/ci_fs_mcx.h b/src/portable/chipidea/ci_fs/ci_fs_mcx.h index 3bfcd398e..4b93a03a7 100644 --- a/src/portable/chipidea/ci_fs/ci_fs_mcx.h +++ b/src/portable/chipidea/ci_fs/ci_fs_mcx.h @@ -29,19 +29,28 @@ #include "fsl_device_registers.h" -#define CI_FS_REG(_port) ((ci_fs_regs_t*) USBFS0_BASE) -#define CI_REG CI_FS_REG(0) +#if CFG_TUSB_MCU == OPT_MCU_MCXN9 + #define CI_FS_REG(_port) ((ci_fs_regs_t*) USBFS0_BASE) + #define CIFS_IRQN USB0_FS_IRQn -void dcd_int_enable(uint8_t rhport) -{ +#elif CFG_TUSB_MCU == OPT_MCU_MCXA15 + #define CI_FS_REG(_port) ((ci_fs_regs_t*) USB0_BASE) + #define CIFS_IRQN USB0_IRQn + +#else + #error "MCU is not supported" +#endif + +#define CI_REG CI_FS_REG(0) + +void dcd_int_enable(uint8_t rhport) { (void) rhport; - NVIC_EnableIRQ(USB0_FS_IRQn); + NVIC_EnableIRQ(CIFS_IRQN); } -void dcd_int_disable(uint8_t rhport) -{ +void dcd_int_disable(uint8_t rhport) { (void) rhport; - NVIC_DisableIRQ(USB0_FS_IRQn); + NVIC_DisableIRQ(CIFS_IRQN); } #endif diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index a68ecf8c9..02f813ab5 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -295,7 +295,7 @@ void dcd_init(uint8_t rhport) CI_REG->INT_EN = USB_INTEN_USBRSTEN_MASK; dcd_connect(rhport); - // NVIC_ClearPendingIRQ(USB0_IRQn); + // NVIC_ClearPendingIRQ(CIFS_IRQN); } void dcd_set_address(uint8_t rhport, uint8_t dev_addr) diff --git a/src/tusb_option.h b/src/tusb_option.h index 812074c44..2921d3ae0 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -180,6 +180,7 @@ // NXP LPC MCX #define OPT_MCU_MCXN9 2300 ///< NXP MCX N9 Series +#define OPT_MCU_MCXA15 2301 ///< NXP MCX A15 Series // Check if configured MCU is one of listed // Apply _TU_CHECK_MCU with || as separator to list of input diff --git a/tools/get_deps.py b/tools/get_deps.py index 67273ed2f..85c8c2126 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -51,7 +51,7 @@ deps_optional = { '84e0bd3e43910aaf71eefd62075cf57495418312', 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', - '950819b7de9b32f92c3edf396bc5ffb8d66e7009', + '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', '0f747aaa0c16f750bdfa2ba37ec25d6c8e1bc117', |