diff options
| author | James Sandison <[email protected]> | 2025-06-04 13:52:35 +1000 |
|---|---|---|
| committer | James Sandison <[email protected]> | 2025-06-04 13:52:35 +1000 |
| commit | b956d10487e537dd1827a60c6786a490fd762dc4 (patch) | |
| tree | d9042100ce489fb91347f8f58d040fbaed11edd3 | |
| parent | 5c4b2c75d214fe9a7189dbcb91783d5b7841aa49 (diff) | |
fix: allow FreeRTOS examples to compile
| -rw-r--r-- | hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h | 5 | ||||
| -rw-r--r-- | hw/bsp/stm32n6/family.c | 10 | ||||
| -rw-r--r-- | hw/bsp/stm32n6/stm32n6xx_hal_conf.h | 10 |
3 files changed, 15 insertions, 10 deletions
diff --git a/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h index 9fd3f6c50..a1b83c802 100644 --- a/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h @@ -44,10 +44,11 @@ // skip if included from IAR assembler #ifndef __IASMARM__ - #include "stm32h7rsxx.h" + #include "stm32n6xx.h" #endif -/* Cortex M23/M33 port configuration. */ +/* Cortex M55 port configuration. */ +#define configENABLE_MVE 0 #define configENABLE_MPU 0 #define configENABLE_FPU 1 #define configENABLE_TRUSTZONE 0 diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c index 0ec1875ac..1d0616d8e 100644 --- a/hw/bsp/stm32n6/family.c +++ b/hw/bsp/stm32n6/family.c @@ -145,7 +145,7 @@ void board_init(void) { // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB1_OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif @@ -173,7 +173,9 @@ void board_init(void) { __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); /* Required few clock cycles before accessing USB PHY Controller Registers */ - HAL_Delay(1); + for (volatile uint32_t i = 0; i < 10; i++) { + __NOP(); // No Operation instruction to create a delay + } USB1_HS_PHYC->USBPHYC_CR &= ~(0x7 << 0x4); @@ -185,7 +187,9 @@ void board_init(void) { __HAL_RCC_USB1_OTG_HS_PHY_RELEASE_RESET(); /* Required few clock cycles before Releasing Reset */ - HAL_Delay(1); + for (volatile uint32_t i = 0; i < 10; i++) { + __NOP(); // No Operation instruction to create a delay + } __HAL_RCC_USB1_OTG_HS_RELEASE_RESET(); diff --git a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h index d98d365a3..00cb31159 100644 --- a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h +++ b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h @@ -48,7 +48,7 @@ /*#define HAL_GFXMMU_MODULE_ENABLED */ /*#define HAL_GFXTIM_MODULE_ENABLED */ /*#define HAL_HASH_MODULE_ENABLED */ -#define HAL_HCD_MODULE_ENABLED +/*#define HAL_HCD_MODULE_ENABLED */ #define HAL_I2C_MODULE_ENABLED /*#define HAL_I2S_MODULE_ENABLED */ /*#define HAL_I3C_MODULE_ENABLED */ @@ -63,11 +63,11 @@ /*#define HAL_MMC_MODULE_ENABLED */ /*#define HAL_NAND_MODULE_ENABLED */ /*#define HAL_NOR_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED +/*#define HAL_PCD_MODULE_ENABLED */ /*#define HAL_PKA_MODULE_ENABLED */ /*#define HAL_PSSI_MODULE_ENABLED */ /*#define HAL_RAMCFG_MODULE_ENABLED */ -#define HAL_RIF_MODULE_ENABLED +/*#define HAL_RIF_MODULE_ENABLED */ /*#define HAL_RNG_MODULE_ENABLED */ /*#define HAL_RTC_MODULE_ENABLED */ /*#define HAL_SAI_MODULE_ENABLED */ @@ -79,9 +79,9 @@ /*#define HAL_SPDIFRX_MODULE_ENABLED */ /*#define HAL_SPI_MODULE_ENABLED */ /*#define HAL_SRAM_MODULE_ENABLED */ -#define HAL_TIM_MODULE_ENABLED +/*#define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -#define HAL_USART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ /*#define HAL_WWDG_MODULE_ENABLED */ /*#define HAL_XSPI_MODULE_ENABLED */ /*#define HAL_CACHEAXI_MODULE_ENABLED */ |