add usbh_spin_lock/unlock() use spinlock instead of atomic flag for hcd max3421

6 files changed, 129 insertions, 17 deletions

diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.cmake b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.cmake
new file mode 100644
index 000000000..9adaefb17
--- /dev/null
+++ b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.cmake
@@ -0,0 +1,3 @@
+# Apply board specific content here
+set(IDF_TARGET "esp32c6")
+set(MAX3421_HOST 1)
diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.h
new file mode 100644
index 000000000..18b51410d
--- /dev/null
+++ b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.h
@@ -0,0 +1,56 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: Adafruit Feather EPS32-C6
+   url: https://www.adafruit.com/product/5933
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define NEOPIXEL_PIN          15
+
+#define BUTTON_PIN            9
+#define BUTTON_STATE_ACTIVE   0
+
+// SPI for USB host shield
+#define MAX3421_SPI_HOST SPI2_HOST
+#define MAX3421_SCK_PIN  21
+#define MAX3421_MOSI_PIN 22
+#define MAX3421_MISO_PIN 23
+#define MAX3421_CS_PIN   8
+#define MAX3421_INTR_PIN 7
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c
index cf11e2441..8f6c4bee2 100644
--- a/hw/bsp/espressif/boards/family.c
+++ b/hw/bsp/espressif/boards/family.c
@@ -49,7 +49,9 @@ static led_strip_handle_t led_strip;
 static void max3421_init(void);
 #endif
 
+#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32P4)
 static bool usb_init(void);
+#endif
 
 //--------------------------------------------------------------------+
 // Implementation
diff --git a/src/host/usbh.c b/src/host/usbh.c
index b7d5a05f2..f2e5c1f0e 100644
--- a/src/host/usbh.c
+++ b/src/host/usbh.c
@@ -147,6 +147,9 @@ static osal_mutex_t _usbh_mutex;
 #define _usbh_mutex   NULL
 #endif
 
+// Spinlock for interrupt handler
+static OSAL_SPINLOCK_DEF(_usbh_spin, usbh_int_set);
+
 // Event queue: usbh_int_set() is used as mutex in OS NONE config
 OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t);
 static osal_queue_t _usbh_q;
@@ -424,6 +427,8 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) {
     TU_LOG_INT_USBH(sizeof(tu_fifo_t));
     TU_LOG_INT_USBH(sizeof(tu_edpt_stream_t));
 
+    osal_spin_init(&_usbh_spin);
+
     // Event queue
     _usbh_q = osal_queue_create(&_usbh_qdef);
     TU_ASSERT(_usbh_q != NULL);
@@ -895,6 +900,14 @@ void usbh_int_set(bool enabled) {
   }
 }
 
+void usbh_spin_lock(bool in_isr) {
+  osal_spin_lock(&_usbh_spin, in_isr);
+}
+
+void usbh_spin_unlock(bool in_isr) {
+  osal_spin_unlock(&_usbh_spin, in_isr);
+}
+
 void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr) {
   hcd_event_t event = { 0 };
   event.event_id = USBH_EVENT_FUNC_CALL;
diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h
index 61b012493..cb092e5f3 100644
--- a/src/host/usbh_pvt.h
+++ b/src/host/usbh_pvt.h
@@ -71,6 +71,9 @@ void usbh_int_set(bool enabled);
 
 void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr);
 
+void usbh_spin_lock(bool in_isr);
+void usbh_spin_unlock(bool in_isr);
+
 //--------------------------------------------------------------------+
 // USBH Endpoint API
 //--------------------------------------------------------------------+
diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c
index bb33200f2..971dbd62e 100644
--- a/src/portable/analog/max3421/hcd_max3421.c
+++ b/src/portable/analog/max3421/hcd_max3421.c
@@ -28,9 +28,9 @@
 
 #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
 
-#include <stdatomic.h>
 #include "host/hcd.h"
 #include "host/usbh.h"
+#include "host/usbh_pvt.h"
 
 //--------------------------------------------------------------------+
 //
@@ -233,7 +233,7 @@ typedef struct {
     uint8_t hxfr;
   }sndfifo_owner;
 
-  atomic_flag busy; // busy transferring
+  bool busy_lock; // busy transferring
 
 #if OSAL_MUTEX_REQUIRED
   OSAL_MUTEX_DEF(spi_mutexdef);
@@ -327,7 +327,9 @@ TU_ATTR_ALWAYS_INLINE static inline void mode_write(uint8_t rhport, uint8_t data
 }
 
 TU_ATTR_ALWAYS_INLINE static inline void peraddr_write(uint8_t rhport, uint8_t data, bool in_isr) {
-  if ( _hcd_data.peraddr == data ) return; // no need to change address
+  if (_hcd_data.peraddr == data) {
+    return; // no need to change address
+  }
 
   _hcd_data.peraddr = data;
   reg_write(rhport, PERADDR_ADDR, data, in_isr);
@@ -373,7 +375,7 @@ TU_ATTR_ALWAYS_INLINE static inline void hwfifo_setup(uint8_t rhport, const uint
 
 static void hwfifo_receive(uint8_t rhport, uint8_t * buffer, uint16_t len, bool in_isr) {
   uint8_t hirq;
-  uint8_t const reg = RCVVFIFO_ADDR;
+  const uint8_t reg = RCVVFIFO_ADDR;
 
   max3421_spi_lock(rhport, in_isr);
 
@@ -389,7 +391,7 @@ static void hwfifo_receive(uint8_t rhport, uint8_t * buffer, uint16_t len, bool
 //--------------------------------------------------------------------+
 
 static max3421_ep_t* find_ep_not_addr0(uint8_t daddr, uint8_t ep_num, uint8_t ep_dir) {
-  uint8_t const is_out = 1-ep_dir;
+  const uint8_t is_out = 1-ep_dir;
   for(size_t i=1; i<CFG_TUH_MAX3421_ENDPOINT_TOTAL; i++) {
     max3421_ep_t* ep = &_hcd_data.ep[i];
     // control endpoint is bi-direction (skip check)
@@ -727,8 +729,8 @@ static void xact_generic(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool
 
 // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked
 bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) {
-  uint8_t const ep_num = tu_edpt_number(ep_addr);
-  uint8_t const ep_dir = (uint8_t) tu_edpt_dir(ep_addr);
+  const uint8_t ep_num = tu_edpt_number(ep_addr);
+  const uint8_t ep_dir = (uint8_t) tu_edpt_dir(ep_addr);
   max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir);
   TU_VERIFY(ep);
 
@@ -744,8 +746,17 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buf
   ep->xferred_len = 0;
   ep->state = EP_STATE_ATTEMPT_1;
 
+  bool has_xfer = false;
+
+  usbh_spin_lock(false);
+  if (!_hcd_data.busy_lock) {
+    _hcd_data.busy_lock = true;
+    has_xfer = true;
+  }
+  usbh_spin_unlock(false);
+
   // carry out transfer if not busy
-  if (!atomic_flag_test_and_set(&_hcd_data.busy)) {
+  if (has_xfer) {
     xact_generic(rhport, ep, true, false);
   }
 
@@ -781,8 +792,17 @@ bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]
   ep->xferred_len = 0;
   ep->state = EP_STATE_ATTEMPT_1;
 
+  bool has_xfer = false;
+
+  usbh_spin_lock(false);
+  if (!_hcd_data.busy_lock) {
+    _hcd_data.busy_lock = true;
+    has_xfer = true;
+  }
+  usbh_spin_unlock(false);
+
   // carry out transfer if not busy
-  if (!atomic_flag_test_and_set(&_hcd_data.busy)) {
+  if (has_xfer) {
     xact_setup(rhport, ep, false);
   }
 
@@ -848,8 +868,8 @@ static void handle_connect_irq(uint8_t rhport, bool in_isr) {
 }
 
 static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t result, uint8_t hrsl, bool in_isr) {
-  uint8_t const ep_dir = 1-ep->hxfr_bm.is_out;
-  uint8_t const ep_addr = tu_edpt_addr(ep->hxfr_bm.ep_num, ep_dir);
+  const uint8_t ep_dir = 1 - ep->hxfr_bm.is_out;
+  const uint8_t ep_addr = tu_edpt_addr(ep->hxfr_bm.ep_num, ep_dir);
 
   // save data toggle
   if (ep_dir) {
@@ -867,7 +887,9 @@ static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t re
     xact_generic(rhport, next_ep, true, in_isr);
   }else {
     // no more pending
-    atomic_flag_clear(&_hcd_data.busy);
+    usbh_spin_lock(in_isr);
+    _hcd_data.busy_lock = false;
+    usbh_spin_unlock(in_isr);
   }
 }
 
@@ -906,7 +928,9 @@ static void handle_xfer_done(uint8_t rhport, bool in_isr) {
         xact_generic(rhport, next_ep, true, in_isr);
       } else {
         // no more pending in this frame -> clear busy
-        atomic_flag_clear(&_hcd_data.busy);
+        usbh_spin_lock(in_isr);
+        _hcd_data.busy_lock = false;
+        usbh_spin_unlock(in_isr);
       }
       return;
 
@@ -997,8 +1021,8 @@ void print_hirq(uint8_t hirq) {
 // Interrupt handler
 void hcd_int_handler(uint8_t rhport, bool in_isr) {
   uint8_t hirq = reg_read(rhport, HIRQ_ADDR, in_isr) & _hcd_data.hien;
-  if (!hirq) return;
-//  print_hirq(hirq);
+  if (!hirq) { return; }
+  //  print_hirq(hirq);
 
   if (hirq & HIRQ_FRAME_IRQ) {
     _hcd_data.frame_count++;
@@ -1017,8 +1041,19 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) {
     }
 
     // start usb transfer if not busy
-    if (ep_retry != NULL && !atomic_flag_test_and_set(&_hcd_data.busy)) {
-      xact_generic(rhport, ep_retry, true, in_isr);
+    if (ep_retry != NULL) {
+      bool has_xfer = false;
+
+      usbh_spin_lock(in_isr);
+      if (!_hcd_data.busy_lock) {
+        _hcd_data.busy_lock = true;
+        has_xfer = true;
+      }
+      usbh_spin_unlock(in_isr);
+
+      if (has_xfer) {
+        xact_generic(rhport, ep_retry, true, in_isr);
+      }
     }
   }