update rt1015 evk

4 files changed, 290 insertions, 166 deletions

diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h
index 10d9fad07..2d7e2dc26 100644
--- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h
@@ -33,18 +33,19 @@
 
 // LED
 #define LED_PINMUX            IOMUXC_GPIO_SD_B1_01_GPIO3_IO21
-#define LED_PORT              GPIO3
-#define LED_PIN               21
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
 // SW8 button
 #define BUTTON_PINMUX         IOMUXC_GPIO_EMC_09_GPIO2_IO09
-#define BUTTON_PORT           GPIO2
-#define BUTTON_PIN            9
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_GPIO
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_GPIO_PIN
 #define BUTTON_STATE_ACTIVE   0
 
 // UART
 #define UART_PORT             LPUART1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 #define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_07_LPUART1_RX
 #define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_06_LPUART1_TX
 
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c
new file mode 100644
index 000000000..97224a332
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c
@@ -0,0 +1,118 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1015xxxxx
+package_id: MIMXRT1015DAF5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1015-EVK
+external_user_signals: {}
+pin_labels:
+- {pin_num: '21', pin_signal: GPIO_SD_B1_01, label: GPIO SD_B1_01, identifier: USER_LED}
+power_domains: {NVCC_GPIO: '3.3'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '1', peripheral: GPIO2, signal: 'gpio_io, 09', pin_signal: GPIO_EMC_09, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm}
+  - {pin_num: '68', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07, pull_up_down_config: Pull_Down_100K_Ohm}
+  - {pin_num: '72', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06}
+  - {pin_num: '21', peripheral: GPIO3, signal: 'gpio_io, 21', pin_signal: GPIO_SD_B1_01, direction: OUTPUT}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  /* GPIO configuration of USER_BUTTON on GPIO_EMC_09 (pin 1) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_EMC_09 (pin 1) */
+  GPIO_PinInit(GPIO2, 9U, &USER_BUTTON_config);
+
+  /* GPIO configuration of USER_LED on GPIO_SD_B1_01 (pin 21) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_SD_B1_01 (pin 21) */
+  GPIO_PinInit(GPIO3, 21U, &USER_LED_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_GPIO2_IO09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_GPIO3_IO21, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0x10B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_09_GPIO2_IO09, 0x70B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '12', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: '11', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: '9', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: '10', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: '13', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: '8', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B, 0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h
new file mode 100644
index 000000000..c9cbe3b72
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h
@@ -0,0 +1,133 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/* GPIO_EMC_09 (number 1), USER_BUTTON */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO2   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    9U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   9U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 9U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        9U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 9U)   /*!< PORT pin mask */
+
+/* GPIO_AD_B0_07 (number 68), LPUART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_RXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_RXD_SIGNAL                                       RX   /*!< Signal name */
+
+/* GPIO_AD_B0_06 (number 72), LPUART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_TXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_TXD_SIGNAL                                       TX   /*!< Signal name */
+
+/* GPIO_SD_B1_01 (number 21), GPIO SD_B1_01 */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO3   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                      21U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO3   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                     21U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                        (1U << 21U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO3   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                          21U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                             (1U << 21U)   /*!< PORT pin mask */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_SD_B1_07 (number 12), FlexSPI_CLK_A/U13[6] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_08 (number 11), FlexSPI_D0_A/U13[5] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (number 9), FlexSPI_D1_A/U13[2] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (number 10), FlexSPI_D2_A/U13[3] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (number 13), FlexSPI_D3_A/U13[7] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (number 8), FlexSPI_SS0/U13[1] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex
index 431a59af7..88265d32e 100644
--- a/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex
@@ -26,6 +26,12 @@
          </generated_project_files>
          <pins_profile>
             <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="21" pin_signal="GPIO_SD_B1_01" label="GPIO SD_B1_01" identifier="USER_LED"/>
+            </pin_labels>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
             <power_domains>
                <power_domain name="NVCC_GPIO" value="3.3"/>
             </power_domains>
@@ -39,165 +45,54 @@
                   <enableClock>true</enableClock>
                </options>
                <dependencies>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-               </dependencies>
-               <pins/>
-            </function>
-            <function name="BOARD_InitDEBUG_UARTPins">
-               <description>Configures pin routing and optionally pin electrical features.</description>
-               <options>
-                  <callFromInitBoot>true</callFromInitBoot>
-                  <coreID>core0</coreID>
-                  <enableClock>true</enableClock>
-               </options>
-               <dependencies>
-                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
                      <feature name="initialized" evaluation="equal">
                         <data>true</data>
                      </feature>
                   </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-               </dependencies>
-               <pins>
-                  <pin peripheral="LPUART1" signal="RX" pin_num="68" pin_signal="GPIO_AD_B0_07"/>
-                  <pin peripheral="LPUART1" signal="TX" pin_num="72" pin_signal="GPIO_AD_B0_06"/>
-               </pins>
-            </function>
-            <function name="BOARD_InitQSPIPins">
-               <description>Configures pin routing and optionally pin electrical features.</description>
-               <options>
-                  <callFromInitBoot>false</callFromInitBoot>
-                  <coreID>core0</coreID>
-                  <enableClock>true</enableClock>
-               </options>
-               <dependencies>
-                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
                      <feature name="initialized" evaluation="equal">
                         <data>true</data>
                      </feature>
                   </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-               </dependencies>
-               <pins>
-                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="12" pin_signal="GPIO_SD_B1_07"/>
-                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="11" pin_signal="GPIO_SD_B1_08"/>
-                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="9" pin_signal="GPIO_SD_B1_10"/>
-                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="10" pin_signal="GPIO_SD_B1_09"/>
-                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="13" pin_signal="GPIO_SD_B1_06"/>
-                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="8" pin_signal="GPIO_SD_B1_11"/>
-               </pins>
-            </function>
-            <function name="BOARD_InitLEDPins">
-               <description>Configures pin routing and optionally pin electrical features.</description>
-               <options>
-                  <callFromInitBoot>false</callFromInitBoot>
-                  <coreID>core0</coreID>
-                  <enableClock>true</enableClock>
-               </options>
-               <dependencies>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
                      <feature name="enabled" evaluation="equal" configuration="core0">
                         <data>true</data>
                      </feature>
                   </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
                      <feature name="enabled" evaluation="equal" configuration="core0">
                         <data>true</data>
                      </feature>
                   </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
                      <feature name="enabled" evaluation="equal" configuration="core0">
                         <data>true</data>
                      </feature>
                   </dependency>
                </dependencies>
                <pins>
-                  <pin peripheral="GPIO3" signal="gpio_io, 21" pin_num="21" pin_signal="GPIO_SD_B1_01">
+                  <pin peripheral="GPIO2" signal="gpio_io, 09" pin_num="1" pin_signal="GPIO_EMC_09">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_47K_Ohm"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="68" pin_signal="GPIO_AD_B0_07">
                      <pin_features>
-                        <pin_feature name="direction" value="OUTPUT"/>
-                        <pin_feature name="gpio_init_state" value="true"/>
-                        <pin_feature name="slew_rate" value="Slow"/>
-                        <pin_feature name="software_input_on" value="Disable"/>
-                        <pin_feature name="open_drain" value="Disable"/>
-                        <pin_feature name="speed" value="MHZ_100"/>
-                        <pin_feature name="drive_strength" value="R0_6"/>
-                        <pin_feature name="pull_keeper_select" value="Keeper"/>
-                        <pin_feature name="pull_keeper_enable" value="Enable"/>
                         <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
-                        <pin_feature name="hysteresis_enable" value="Disable"/>
                      </pin_features>
                   </pin>
-               </pins>
-            </function>
-            <function name="BOARD_InitBUTTONPins">
-               <description>Configures pin routing and optionally pin electrical features.</description>
-               <options>
-                  <callFromInitBoot>false</callFromInitBoot>
-                  <coreID>core0</coreID>
-                  <enableClock>true</enableClock>
-               </options>
-               <dependencies>
-                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitBUTTONPins">
-                     <feature name="initialized" evaluation="equal">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
-                     <feature name="enabled" evaluation="equal" configuration="core0">
-                        <data>true</data>
-                     </feature>
-                  </dependency>
-               </dependencies>
-               <pins>
-                  <pin peripheral="GPIO2" signal="gpio_io, 09" pin_num="1" pin_signal="GPIO_EMC_09">
+                  <pin peripheral="LPUART1" signal="TX" pin_num="72" pin_signal="GPIO_AD_B0_06"/>
+                  <pin peripheral="GPIO3" signal="gpio_io, 21" pin_num="21" pin_signal="GPIO_SD_B1_01">
                      <pin_features>
-                        <pin_feature name="direction" value="INPUT"/>
-                        <pin_feature name="slew_rate" value="Slow"/>
-                        <pin_feature name="software_input_on" value="Disable"/>
-                        <pin_feature name="open_drain" value="Disable"/>
-                        <pin_feature name="speed" value="MHZ_100"/>
-                        <pin_feature name="drive_strength" value="R0_4"/>
-                        <pin_feature name="pull_keeper_select" value="Pull"/>
-                        <pin_feature name="pull_keeper_enable" value="Enable"/>
-                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
-                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="direction" value="OUTPUT"/>
                      </pin_features>
                   </pin>
                </pins>
             </function>
-            <function name="BOARD_InitCOMBO_SENSORPins">
+            <function name="BOARD_InitQSPIPins">
                <description>Configures pin routing and optionally pin electrical features.</description>
                <options>
                   <callFromInitBoot>false</callFromInitBoot>
@@ -205,49 +100,29 @@
                   <enableClock>true</enableClock>
                </options>
                <dependencies>
-                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
                      <feature name="initialized" evaluation="equal">
                         <data>true</data>
                      </feature>
                   </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
                      <feature name="enabled" evaluation="equal" configuration="core0">
                         <data>true</data>
                      </feature>
                   </dependency>
-                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
                      <feature name="enabled" evaluation="equal" configuration="core0">
                         <data>true</data>
                      </feature>
                   </dependency>
                </dependencies>
                <pins>
-                  <pin peripheral="LPI2C1" signal="SCL" pin_num="53" pin_signal="GPIO_AD_B1_14">
-                     <pin_features>
-                        <pin_feature name="slew_rate" value="Slow"/>
-                        <pin_feature name="software_input_on" value="Enable"/>
-                        <pin_feature name="open_drain" value="Enable"/>
-                        <pin_feature name="speed" value="MHZ_100"/>
-                        <pin_feature name="drive_strength" value="R0_6"/>
-                        <pin_feature name="pull_keeper_select" value="Keeper"/>
-                        <pin_feature name="pull_keeper_enable" value="Enable"/>
-                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
-                        <pin_feature name="hysteresis_enable" value="Disable"/>
-                     </pin_features>
-                  </pin>
-                  <pin peripheral="LPI2C1" signal="SDA" pin_num="52" pin_signal="GPIO_AD_B1_15">
-                     <pin_features>
-                        <pin_feature name="slew_rate" value="Slow"/>
-                        <pin_feature name="software_input_on" value="Enable"/>
-                        <pin_feature name="open_drain" value="Enable"/>
-                        <pin_feature name="speed" value="MHZ_100"/>
-                        <pin_feature name="drive_strength" value="R0_6"/>
-                        <pin_feature name="pull_keeper_select" value="Keeper"/>
-                        <pin_feature name="pull_keeper_enable" value="Enable"/>
-                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
-                        <pin_feature name="hysteresis_enable" value="Disable"/>
-                     </pin_features>
-                  </pin>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="12" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="11" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="9" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="10" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="13" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="8" pin_signal="GPIO_SD_B1_11"/>
                </pins>
             </function>
          </functions_list>
@@ -399,11 +274,8 @@
          </dcdx_profile>
          <dcdx_configurations/>
       </dcdx>
-      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
-         <generated_project_files>
-            <file path="board/peripherals.c" update_enabled="true"/>
-            <file path="board/peripherals.h" update_enabled="true"/>
-         </generated_project_files>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
          <peripherals_profile>
             <processor_version>13.0.2</processor_version>
          </peripherals_profile>