replacing RF1GHZNODE with LPCXPRESSO11U68 (not yet implement the actual board)

2 files changed, 0 insertions, 171 deletions

diff --git a/boards/microbuilder/board_rf1ghznode.c b/boards/microbuilder/board_rf1ghznode.c
deleted file mode 100644
index 882ab6853..000000000
--- a/boards/microbuilder/board_rf1ghznode.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/**************************************************************************/

-/*!

-    @file     board_rf1ghznode.c

-    @author   hathach (tinyusb.org)

-

-    @section LICENSE

-

-    Software License Agreement (BSD License)

-

-    Copyright (c) 2013, hathach (tinyusb.org)

-    All rights reserved.

-

-    Redistribution and use in source and binary forms, with or without

-    modification, are permitted provided that the following conditions are met:

-    1. Redistributions of source code must retain the above copyright

-    notice, this list of conditions and the following disclaimer.

-    2. Redistributions in binary form must reproduce the above copyright

-    notice, this list of conditions and the following disclaimer in the

-    documentation and/or other materials provided with the distribution.

-    3. Neither the name of the copyright holders nor the

-    names of its contributors may be used to endorse or promote products

-    derived from this software without specific prior written permission.

-

-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY

-    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY

-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-    INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND

-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-    INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS

-    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-

-    This file is part of the tinyusb stack.

-*/

-/**************************************************************************/

-

-#include "../board.h"

-

-#if BOARD == BOARD_RF1GHZNODE

-

-#define LED_PORT                  (1)

-#define LED_PIN                   (31)

-#define LED_ON                    (0)

-#define LED_OFF                   (1)

-

-const static struct {

-  uint8_t port;

-  uint8_t pin;

-} buttons[] = { { 0, 1 } };

-

-enum {

-  BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])

-};

-

-void board_init(void)

-{

-  SystemInit();

-

-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c

-  SysTick_Config(SystemCoreClock / TUSB_CFG_TICKS_HZ); // 1 msec tick timer

-#endif

-

-  GPIOInit();

-

-  //------------- LED -------------//

-  GPIOSetDir(LED_PORT, LED_PIN, 1);

-

-  //------------- BUTTON -------------//

-  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIOSetDir(buttons[i].port, buttons[i].pin, 0);

-

-  //------------- UART -------------//

-  UARTInit(CFG_UART_BAUDRATE);

-}

-

-//--------------------------------------------------------------------+

-// LEDS

-//--------------------------------------------------------------------+

-void board_leds(uint32_t on_mask, uint32_t off_mask)

-{

-  if (on_mask & BIT_(0))

-  {

-    GPIOSetBitValue(LED_PORT, LED_PIN, LED_ON);

-  }else if (off_mask & BIT_(0))

-  {

-    GPIOSetBitValue(LED_PORT, LED_PIN, LED_OFF);

-  }

-}

-

-//--------------------------------------------------------------------+

-// Buttons

-//--------------------------------------------------------------------+

-uint32_t board_buttons(void)

-{

-//  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIOGetPinValue(buttons[i].port, buttons[i].pin);

-  return GPIOGetPinValue(buttons[0].port, buttons[0].pin) ? 0 : 1; // button is active low

-}

-

-//--------------------------------------------------------------------+

-// UART

-//--------------------------------------------------------------------+

-void board_uart_putchar(uint8_t c)

-{

-  UARTSend(&c, 1);

-}

-

-uint8_t  board_uart_getchar(void)

-{

-//  *buffer = get_key(); TODO cannot find available code for uart getchar

-  return 0;

-}

-

-#endif

diff --git a/boards/microbuilder/board_rf1ghznode.h b/boards/microbuilder/board_rf1ghznode.h
deleted file mode 100644
index d5bee0fb2..000000000
--- a/boards/microbuilder/board_rf1ghznode.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/**************************************************************************/

-/*!

-    @file     board_rf1ghznode.h

-    @author   hathach (tinyusb.org)

-

-    @section LICENSE

-

-    Software License Agreement (BSD License)

-

-    Copyright (c) 2013, hathach (tinyusb.org)

-    All rights reserved.

-

-    Redistribution and use in source and binary forms, with or without

-    modification, are permitted provided that the following conditions are met:

-    1. Redistributions of source code must retain the above copyright

-    notice, this list of conditions and the following disclaimer.

-    2. Redistributions in binary form must reproduce the above copyright

-    notice, this list of conditions and the following disclaimer in the

-    documentation and/or other materials provided with the distribution.

-    3. Neither the name of the copyright holders nor the

-    names of its contributors may be used to endorse or promote products

-    derived from this software without specific prior written permission.

-

-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY

-    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY

-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-    INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND

-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-    INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS

-    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-

-    This file is part of the tinyusb stack.

-*/

-/**************************************************************************/

-

-#ifndef _TUSB_BOARD_RF1GHZNODE_H_

-#define _TUSB_BOARD_RF1GHZNODE_H_

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-#include "LPC11Uxx.h"

-#include "lpc11uxx_gpio.h"

-#include "lpc11uxx_uart.h"

-

-//#define CFG_PRINTF_TARGET             PRINTF_TARGET_SEMIHOST

-#define CFG_PRINTF_TARGET             PRINTF_TARGET_UART

-

-#ifdef __cplusplus

- }

-#endif

-

-#endif /* _TUSB_BOARD_RF1GHZNODE_H_ */