mass rename TUSB_CFG to CFG_TUSB

3 files changed, 26 insertions, 26 deletions

diff --git a/doxygen/configuration.txt b/doxygen/configuration.txt
index c84eea76e..8f5887718 100644
--- a/doxygen/configuration.txt
+++ b/doxygen/configuration.txt
@@ -7,46 +7,46 @@
 
 /// \brief tell the stack which mode (host/device/otg) the usb controller0 will be operated on. Possible value is
 /// from \ref group_mode. Note the hardware usb controller must support the selected mode.
-#define TUSB_CFG_CONTROLLER_0_MODE
+#define CFG_TUSB_CONTROLLER_0_MODE
 
 /** USB controller in MCU often has limited access to specific RAM section. The Stack will use this macro to place internal variables
-  into the USB RAM section as follows. if your mcu's usb controller has no such limit, define TUSB_CFG_ATTR_USBRAM as empty macro.
+  into the USB RAM section as follows. if your mcu's usb controller has no such limit, define CFG_TUSB_ATTR_USBRAM as empty macro.
 
   @code
-  TUSB_CFG_ATTR_USBRAM uint8_t usb_xfer_buffer[10];
+  CFG_TUSB_ATTR_USBRAM uint8_t usb_xfer_buffer[10];
   @endcode
  */
-#define TUSB_CFG_ATTR_USBRAM
+#define CFG_TUSB_ATTR_USBRAM
 
-#define TUSB_CFG_MCU          ///< Select one of the supported MCU, the value must be from \ref group_mcu
-#define TUSB_CFG_OS           ///< Select one of the supported RTOS, the value must be from \ref group_supported_os.
-#define TUSB_CFG_OS_TASK_PRIO ///< If \ref TUSB_CFG_OS is configured to use a real RTOS (other than TUSB_OS_NONE). This determines the priority of the usb stack task.
-#define TUSB_CFG_TICKS_HZ     ///< The rate ticks in hert. This is used in conjunction with \ref tusb_tick_get to calculate timing.
+#define CFG_TUSB_MCU          ///< Select one of the supported MCU, the value must be from \ref group_mcu
+#define CFG_TUSB_OS           ///< Select one of the supported RTOS, the value must be from \ref group_supported_os.
+#define CFG_TUSB_OS_TASK_PRIO ///< If \ref CFG_TUSB_OS is configured to use a real RTOS (other than TUSB_OS_NONE). This determines the priority of the usb stack task.
+#define CFG_TUSB_TICKS_HZ     ///< The rate ticks in hert. This is used in conjunction with \ref tusb_tick_get to calculate timing.
 
 //--------------------------------------------------------------------+
 // HOST CONFIGURATION
 //--------------------------------------------------------------------+
-/** \defgroup TUSB_CFG_HOST Host Options
+/** \defgroup CFG_TUSB_HOST Host Options
  *  @{ */
 
 /** \brief Maximum number of device host stack can manage
  * \n If hub class is not enabled, set this equal to number of controllers in host mode
  * \n If hub class is enabled, make sure hub is also counted */
-#define TUSB_CFG_HOST_DEVICE_MAX
+#define CFG_TUSB_HOST_DEVICE_MAX
 
 /// \brief Buffer size used for getting device configuration descriptor. You may want to increase this from default (256)
 /// to support lengthy composite device especially with Audio or Video class
-#define TUSB_CFG_HOST_ENUM_BUFFER_SIZE
+#define CFG_TUSB_HOST_ENUM_BUFFER_SIZE
 
 /** \defgroup config_host_class Class Driver
  * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
  * @{ */
-#define TUSB_CFG_HOST_HUB           ///< Enable Hub Class
-#define TUSB_CFG_HOST_HID_KEYBOARD  ///< Enable HID Class for Keyboard
-#define TUSB_CFG_HOST_HID_MOUSE     ///< Enable HID Class for Mouse
-#define TUSB_CFG_HOST_HID_GENERIC   ///< Enable HID Class for Generic (not supported yet)
-#define TUSB_CFG_HOST_MSC           ///< Enable Mass Storage Class (SCSI subclass only)
-#define TUSB_CFG_HOST_CDC           ///< Enable Virtual Serial (Communication Device Class)
+#define CFG_TUSB_HOST_HUB           ///< Enable Hub Class
+#define CFG_TUSB_HOST_HID_KEYBOARD  ///< Enable HID Class for Keyboard
+#define CFG_TUSB_HOST_HID_MOUSE     ///< Enable HID Class for Mouse
+#define CFG_TUSB_HOST_HID_GENERIC   ///< Enable HID Class for Generic (not supported yet)
+#define CFG_TUSB_HOST_MSC           ///< Enable Mass Storage Class (SCSI subclass only)
+#define CFG_TUSB_HOST_CDC           ///< Enable Virtual Serial (Communication Device Class)
 /** @} */
 
 /** @} */ // group Host
@@ -54,10 +54,10 @@
 //--------------------------------------------------------------------+
 // DEVICE CONFIGURATION
 //--------------------------------------------------------------------+
-/** \defgroup TUSB_CFG_DEVICE Device Options
+/** \defgroup CFG_TUSB_DEVICE Device Options
  *  @{ */
 
-#define TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE ///< Max packet size of Cotnrol Endpoint, default is 64
+#define CFG_TUSB_DEVICE_CONTROL_ENDOINT_SIZE ///< Max packet size of Cotnrol Endpoint, default is 64
 
 /// Application MUST define this variable and initialize its pointers's member to all required USB descriptors including
 /// Device Descriptor, Configuration Descriptor, String Descriptors, HID Report Descriptors etc ...
@@ -66,11 +66,11 @@ tusbd_descriptor_pointer_t tusbd_descriptor_pointers;
 /** \defgroup config_device_class Class Driver
  * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
  * @{ */
-#define TUSB_CFG_DEVICE_HID_KEYBOARD ///< Enable HID Class for Keyboard
-#define TUSB_CFG_DEVICE_HID_MOUSE 	 ///< Enable HID Class for Mouse
-#define TUSB_CFG_DEVICE_HID_GENERIC  ///< Enable HID Class for Generic (not supported yet)
-#define TUSB_CFG_DEVICE_MSC 				 ///< Enable Mass Storage Class (SCSI subclass only)
-#define TUSB_CFG_DEVICE_CDC 				 ///< Enable Virtual Serial (Communication Device Class)
+#define CFG_TUSB_DEVICE_HID_KEYBOARD ///< Enable HID Class for Keyboard
+#define CFG_TUSB_DEVICE_HID_MOUSE 	 ///< Enable HID Class for Mouse
+#define CFG_TUSB_DEVICE_HID_GENERIC  ///< Enable HID Class for Generic (not supported yet)
+#define CFG_TUSB_DEVICE_MSC 				 ///< Enable Mass Storage Class (SCSI subclass only)
+#define CFG_TUSB_DEVICE_CDC 				 ///< Enable Virtual Serial (Communication Device Class)
 /** @} */
 
 /** @} */ // group Device
diff --git a/doxygen/getting_started.md b/doxygen/getting_started.md
index d58634845..79bc8f01f 100644
--- a/doxygen/getting_started.md
+++ b/doxygen/getting_started.md
@@ -35,7 +35,7 @@ It is relatively simple to incorporate tinyusb to your (existing) project
 1. Copy core folder **tinyusb** to your project. Let's say it is *your_project/tinyusb*
 2. Add all the .c in the core folder to your project settings (uvproj, ewp, makefile)
 3. Add *your_project/tinysb* to your include path. Also make sure your current include path also contains the configuration file tusb_config.h. Or you could simply put the tusb_config.h into the tinyusb folder as well.
-4. Make sure all required macros are all defined properly in tusb_config.h (configure file in demo application is sufficient, but you need to add a few more such as TUSB_CFG_MCU, TUSB_CFG_OS, TUSB_CFG_OS_TASK_PRIO since they are passed by IDE/compiler to maintain a unique configure for all demo projects).
+4. Make sure all required macros are all defined properly in tusb_config.h (configure file in demo application is sufficient, but you need to add a few more such as CFG_TUSB_MCU, CFG_TUSB_OS, CFG_TUSB_OS_TASK_PRIO since they are passed by IDE/compiler to maintain a unique configure for all demo projects).
 5. If you use the device stack, make sure you have created/modified usb descriptors for your own need. Ultimately you need to fill out required pointers in tusbd_descriptor_pointers for that stack to work.
 6. Add tusb_init() call to your reset initialization code.
 7. Implement all enabled classes's callbacks.
diff --git a/doxygen/started_demo.md b/doxygen/started_demo.md
index 287c55731..7e82596f5 100644
--- a/doxygen/started_demo.md
+++ b/doxygen/started_demo.md
@@ -34,7 +34,7 @@ void led_blinking_task( void * p_task_para )
     static uint32_t led_on_mask = 0;
 
     // FreeRTOS API's vTaskDelay is used in place of osal_task_delay. Note it takes input parameter in tick
-    vTaskDelay( (led_blink_interval_ms * TUSB_CFG_TICKS_HZ) / 1000);
+    vTaskDelay( (led_blink_interval_ms * CFG_TUSB_TICKS_HZ) / 1000);
 
     board_leds(led_on_mask, 1 - led_on_mask);
     led_on_mask = 1 - led_on_mask; // toggle