Merge branch 'master' into pr/2181

5 files changed, 58 insertions, 40 deletions

diff --git a/examples/device/audio_test/Makefile b/examples/device/audio_test/Makefile
index 2a3d854fb..7fa475da5 100644
--- a/examples/device/audio_test/Makefile
+++ b/examples/device/audio_test/Makefile
@@ -1,4 +1,4 @@
-include ../../make.mk
+include ../../build_system/make/make.mk
 
 INC += \
   src \
@@ -8,4 +8,4 @@ INC += \
 EXAMPLE_SOURCE += $(wildcard src/*.c)
 SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
 
-include ../../rules.mk
+include ../../build_system/make/rules.mk
diff --git a/examples/device/audio_test/skip.txt b/examples/device/audio_test/skip.txt
index 1ee86a485..65b137814 100644
--- a/examples/device/audio_test/skip.txt
+++ b/examples/device/audio_test/skip.txt
@@ -1,3 +1,4 @@
 mcu:SAMD11
 mcu:SAME5X
 mcu:SAMG
+family:espressif
diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c
index b5ca41d36..f79bb4468 100644
--- a/examples/device/audio_test/src/main.c
+++ b/examples/device/audio_test/src/main.c
@@ -35,17 +35,13 @@
 #include <stdio.h>
 #include <string.h>
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
 
-#ifndef AUDIO_SAMPLE_RATE
-#define AUDIO_SAMPLE_RATE   48000
-#endif
-
 /* Blink pattern
  * - 250 ms  : device not mounted
  * - 1000 ms : device mounted
@@ -85,13 +81,17 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   // Init values
-  sampFreq = AUDIO_SAMPLE_RATE;
+  sampFreq = CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE;
   clkValid = 1;
 
   sampleFreqRng.wNumSubRanges = 1;
-  sampleFreqRng.subrange[0].bMin = AUDIO_SAMPLE_RATE;
-  sampleFreqRng.subrange[0].bMax = AUDIO_SAMPLE_RATE;
+  sampleFreqRng.subrange[0].bMin = CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE;
+  sampleFreqRng.subrange[0].bMax = CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE;
   sampleFreqRng.subrange[0].bRes = 0;
 
   while (1)
@@ -130,7 +130,7 @@ void tud_suspend_cb(bool remote_wakeup_en)
 // Invoked when usb bus is resumed
 void tud_resume_cb(void)
 {
-  blink_interval_ms = BLINK_MOUNTED;
+  blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED;
 }
 
 //--------------------------------------------------------------------+
diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h
index 9f38612a9..8c021e23c 100644
--- a/examples/device/audio_test/src/tusb_config.h
+++ b/examples/device/audio_test/src/tusb_config.h
@@ -106,6 +106,7 @@ extern "C" {
 //--------------------------------------------------------------------
 
 // Have a look into audio_device.h for all configurations
+#define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE                              48000
 
 #define CFG_TUD_AUDIO_FUNC_1_DESC_LEN                                 TUD_AUDIO_MIC_ONE_CH_DESC_LEN
 #define CFG_TUD_AUDIO_FUNC_1_N_AS_INT                                 1                                       // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes)
@@ -114,9 +115,9 @@ extern "C" {
 #define CFG_TUD_AUDIO_ENABLE_EP_IN                                    1
 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX                    2                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below
 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                            1                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor!
-#define CFG_TUD_AUDIO_EP_SZ_IN                                        (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - One extra sample is needed for asynchronous transfer adjustment, see feedback EP
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX                             CFG_TUD_AUDIO_EP_SZ_IN                  // Maximum EP IN size for all AS alternate settings used
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ                          CFG_TUD_AUDIO_EP_SZ_IN + 1
+#define CFG_TUD_AUDIO_EP_SZ_IN                                        TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX                             CFG_TUD_AUDIO_EP_SZ_IN
+#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ                          (TUD_OPT_HIGH_SPEED ? 8 : 1) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device
 
 #ifdef __cplusplus
 }
diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c
index cc364ee88..9864377f6 100644
--- a/examples/device/audio_test/src/usb_descriptors.c
+++ b/examples/device/audio_test/src/usb_descriptors.c
@@ -23,6 +23,7 @@
  *
  */
 
+#include "bsp/board_api.h"
 #include "tusb.h"
 
 /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
@@ -116,50 +117,65 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
 // String Descriptors
 //--------------------------------------------------------------------+
 
+// String Descriptor Index
+enum {
+  STRID_LANGID = 0,
+  STRID_MANUFACTURER,
+  STRID_PRODUCT,
+  STRID_SERIAL,
+};
+
 // array of pointer to string descriptors
 char const* string_desc_arr [] =
 {
-    (const char[]) { 0x09, 0x04 }, 	// 0: is supported language is English (0x0409)
-    "PaniRCorp",                   	// 1: Manufacturer
-    "MicNode",              		// 2: Product
-    "123456",                      	// 3: Serials, should use chip ID
-    "UAC2",                 	 	// 4: Audio Interface
+    (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+    "PaniRCorp",                   // 1: Manufacturer
+    "MicNode",                     // 2: Product
+    NULL,                          // 3: Serials will use unique ID if possible
+    "UAC2",                        // 4: Audio Interface
+
 };
 
-static uint16_t _desc_str[32];
+static uint16_t _desc_str[32 + 1];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
-{
+uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
   (void) langid;
+  size_t chr_count;
+
+  switch ( index ) {
+    case STRID_LANGID:
+      memcpy(&_desc_str[1], string_desc_arr[0], 2);
+      chr_count = 1;
+      break;
 
-  uint8_t chr_count;
+    case STRID_SERIAL:
+      chr_count = board_usb_get_serial(_desc_str + 1, 32);
+      break;
 
-  if ( index == 0)
-  {
-    memcpy(&_desc_str[1], string_desc_arr[0], 2);
-    chr_count = 1;
-  }else
-  {
-    // Convert ASCII string into UTF-16
+    default:
+      // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
+      // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors
 
-    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+      if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL;
 
-    const char* str = string_desc_arr[index];
+      const char *str = string_desc_arr[index];
 
-    // Cap at max char
-    chr_count = (uint8_t) strlen(str);
-    if ( chr_count > 31 ) chr_count = 31;
+      // Cap at max char
+      chr_count = strlen(str);
+      size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type
+      if ( chr_count > max_count ) chr_count = max_count;
 
-    for(uint8_t i=0; i<chr_count; i++)
-    {
-      _desc_str[1+i] = str[i];
-    }
+      // Convert ASCII string into UTF-16
+      for ( size_t i = 0; i < chr_count; i++ ) {
+        _desc_str[1 + i] = str[i];
+      }
+      break;
   }
 
   // first byte is length (including header), second byte is string type
-  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2));
+  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2));
 
   return _desc_str;
 }