Merge branch 'master' into ep0_direct

# Conflicts:
#	hw/bsp/same7x/boards/same70_qmtech/board.cmake
#	hw/bsp/same7x/boards/same70_xplained/board.cmake
#	hw/bsp/same7x/family.cmake

2 files changed, 8 insertions, 11 deletions

diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c
index dac74bb7a..8ebb42f9a 100644
--- a/examples/device/dynamic_configuration/src/main.c
+++ b/examples/device/dynamic_configuration/src/main.c
@@ -170,7 +170,7 @@ void midi_task(void) {
   while( tud_midi_available() ) tud_midi_packet_read(packet);
 
   // send note every 1000 ms
-  if (board_millis() - start_ms < 286) {
+  if (tusb_time_millis_api() - start_ms < 286) {
     return; // not enough time
   }
   start_ms += 286;
@@ -209,7 +209,7 @@ void led_blinking_task(void) {
   static bool led_state = false;
 
   // Blink every interval ms
-  if (board_millis() - start_ms < blink_interval_ms) {
+  if (tusb_time_millis_api() - start_ms < blink_interval_ms) {
     return;// not enough time
   }
   start_ms += blink_interval_ms;
diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c
index e95b2e197..b545e4652 100644
--- a/examples/device/dynamic_configuration/src/msc_disk.c
+++ b/examples/device/dynamic_configuration/src/msc_disk.c
@@ -215,20 +215,17 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
 // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
 // - READ10 and WRITE10 has their own callbacks
 int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) {
-  // read10 & write10 has their own callback and MUST not be handled here
+  (void) lun;
+  (void) scsi_cmd;
   (void) buffer;
   (void) bufsize;
 
-  switch (scsi_cmd[0]) {
-    default:
-      // Set Sense = Invalid Command Operation
-      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
+  // currently no other commands are supported
 
-      // negative means error -> tinyusb could stall and/or response with failed status
-      return -1;
-  }
+  // Set Sense = Invalid Command Operation
+  (void) tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
 
-  return -1;
+  return -1; // stall/failed command request;
 }
 
 #endif