replace printer_to_hid example with printer_to_cdc example

fix printer GET_DEVICE_ID request weird wIndex (interface high, alt low)

8 files changed, 0 insertions, 590 deletions

diff --git a/examples/device/printer_to_hid/CMakeLists.txt b/examples/device/printer_to_hid/CMakeLists.txt
deleted file mode 100644
index f58759059..000000000
--- a/examples/device/printer_to_hid/CMakeLists.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-cmake_minimum_required(VERSION 3.20)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
-
-project(printer_to_hid C CXX ASM)
-
-# Checks this example is valid for the family and initializes the project
-family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR})
-# Espressif has its own cmake build system
-if(FAMILY STREQUAL "espressif")
-  return()
-endif()
-
-add_executable(${PROJECT_NAME})
-
-# Example source
-target_sources(${PROJECT_NAME} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
-        ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
-        )
-
-# Example include
-target_include_directories(${PROJECT_NAME} PUBLIC
-        ${CMAKE_CURRENT_SOURCE_DIR}/src
-        )
-
-# Configure compilation flags and libraries for the example without RTOS.
-# See the corresponding function in hw/bsp/FAMILY/family.cmake for details.
-family_configure_device_example(${PROJECT_NAME} noos)
diff --git a/examples/device/printer_to_hid/CMakePresets.json b/examples/device/printer_to_hid/CMakePresets.json
deleted file mode 100644
index 5cd8971e9..000000000
--- a/examples/device/printer_to_hid/CMakePresets.json
+++ /dev/null
@@ -1,6 +0,0 @@
-{
-  "version": 6,
-  "include": [
-    "../../../hw/bsp/BoardPresets.json"
-  ]
-}
diff --git a/examples/device/printer_to_hid/Makefile b/examples/device/printer_to_hid/Makefile
deleted file mode 100644
index 1a4b428dc..000000000
--- a/examples/device/printer_to_hid/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-include ../../../hw/bsp/family_support.mk
-
-INC += \
-	src \
-
-
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE))
-
-include ../../../hw/bsp/family_rules.mk
diff --git a/examples/device/printer_to_hid/README.md b/examples/device/printer_to_hid/README.md
deleted file mode 100644
index e69de29bb..000000000
--- a/examples/device/printer_to_hid/README.md
+++ /dev/null
diff --git a/examples/device/printer_to_hid/src/main.c b/examples/device/printer_to_hid/src/main.c
deleted file mode 100644
index 0d14147b4..000000000
--- a/examples/device/printer_to_hid/src/main.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2026 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "bsp/board_api.h"
-#include "tusb.h"
-
-#include "usb_descriptors.h"
-
-// -------------------------------------------------------------------+
-// Variables
-// -------------------------------------------------------------------+
-
-// next keycode to send on usb/hid
-static uint8_t next_keycode = 0;
-// next key modifiers to send on usb/hid
-static uint8_t next_modifiers = 0;
-// whether the next usb/hid report must be NULL to release the last keystroke
-static bool next_keycode_is_release = false;
-
-
-// -------------------------------------------------------------------+
-// Tasks
-// -------------------------------------------------------------------+
-
-// Every 10ms, we will place HID data in the usb/hid endpoint, ready to
-// sent to the host when required. The tasks will read the keycode in
-// next_keycode and place it in the HID report, then set next_is_null
-// such that the key is released by the next report. This seem to help
-// stroking the same key twice when the character is repeated in the data.
-static void hid_tx_task(void) {
-  // Poll every 10ms
-  const uint32_t  interval_ms = 10;
-  static uint32_t start_ms    = 0;
-
-  if (!tud_hid_ready()) {
-    return;
-  }
-
-  if (tusb_time_millis_api() - start_ms < interval_ms) {
-    return; // not enough time
-  }
-  start_ms += interval_ms;
-
-  if (next_keycode_is_release || next_keycode == 0) {
-    tud_hid_keyboard_report(1, 0, NULL);
-    next_keycode_is_release = false;
-    return;
-  }
-
-  uint8_t keycode_array[6] = {0};
-  keycode_array[0]         = next_keycode;
-  tud_hid_keyboard_report(1, next_modifiers, keycode_array);
-  next_keycode_is_release = true;
-  next_keycode            = 0;
-}
-
-// Read one byte from printer FIFO and translate to HID keycode.
-// Only a-zA-Z0-9 are translated; everything else becomes space.
-static void printer_to_hid_task(void) {
-  if (next_keycode != 0) {
-    return; // previous key not yet sent
-  }
-
-  uint8_t ch;
-  if (tud_printer_read(&ch, 1) == 0) {
-    return; // no data available
-  }
-
-  uint8_t m = 0;
-  if ('a' <= ch && ch <= 'z') {
-    ch = (uint8_t)(ch - 'a' + HID_KEY_A);
-  } else if ('A' <= ch && ch <= 'Z') {
-    ch = (uint8_t)(ch - 'A' + HID_KEY_A);
-    m = KEYBOARD_MODIFIER_LEFTSHIFT;
-  } else if ('1' <= ch && ch <= '9') {
-    ch = (uint8_t)(ch - '1' + HID_KEY_1);
-  } else if (ch == '0') {
-    ch = HID_KEY_0;
-  } else {
-    ch = HID_KEY_SPACE;
-  }
-
-  next_keycode   = ch;
-  next_modifiers = m;
-}
-
-int main(void) {
-  board_init();
-  // init device and host stack on configured roothub port
-  tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO};
-  tusb_init(BOARD_TUD_RHPORT, &dev_init);
-  board_init_after_tusb();
-
-  while (1) {
-    tud_task();            // tinyusb device task
-    printer_to_hid_task(); // read printer data and translate to HID keycodes
-    hid_tx_task();         // send keycodes to host via HID
-  }
-}
-
-
-//--------------------------------------------------------------------+
-// Printer callbacks
-//--------------------------------------------------------------------+
-
-void tud_printer_rx_cb(uint8_t itf) {
-  (void)itf;
-}
-
-// IEEE 1284 Device ID: first 2 bytes are big-endian total length (including the 2 length bytes).
-// The rest is the Device ID string using standard abbreviated keys.
-static const char printer_device_id[] =
-  "\x00\x34" // total length = 52 = 0x0034 (big-endian)
-  "MFG:TinyUSB;"
-  "MDL:Printer to HID;"
-  "CMD:PS;"
-  "CLS:PRINTER;";
-
-TU_VERIFY_STATIC(sizeof(printer_device_id) - 1 == 52, "device ID length mismatch");
-
-uint8_t const *tud_printer_get_device_id_cb(uint8_t itf) {
-  (void)itf;
-  return (uint8_t const *)printer_device_id;
-}
-
-
-//--------------------------------------------------------------------+
-// HID callbacks
-//--------------------------------------------------------------------+
-
-uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t *buffer,
-                               uint16_t reqlen) {
-  (void)instance;
-  (void)report_id;
-  (void)report_type;
-  (void)buffer;
-  (void)reqlen;
-  return 0;
-}
-
-void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, const uint8_t *buffer,
-                           uint16_t bufsize) {
-  (void)instance;
-  (void)report_id;
-  (void)report_type;
-  (void)buffer;
-  (void)bufsize;
-  return;
-}
diff --git a/examples/device/printer_to_hid/src/tusb_config.h b/examples/device/printer_to_hid/src/tusb_config.h
deleted file mode 100644
index 0988be166..000000000
--- a/examples/device/printer_to_hid/src/tusb_config.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2026 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-//--------------------------------------------------------------------+
-// Board Specific Configuration
-//--------------------------------------------------------------------+
-
-// RHPort number used for device can be defined by board.mk, default to port 0
-#ifndef BOARD_TUD_RHPORT
-  #define BOARD_TUD_RHPORT 0
-#endif
-
-// RHPort max operational speed can defined by board.mk
-#ifndef BOARD_TUD_MAX_SPEED
-  #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED
-#endif
-
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by compiler flags for flexibility
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
-
-#ifndef CFG_TUSB_OS
-  #define CFG_TUSB_OS OPT_OS_NONE
-#endif
-
-#ifndef CFG_TUSB_DEBUG
-  #define CFG_TUSB_DEBUG 0
-#endif
-
-// Enable Device stack
-#define CFG_TUD_ENABLED 1
-
-// Default is max speed that hardware controller could support with on-chip PHY
-#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED
-
-/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
- * Tinyusb use follows macros to declare transferring memory so that they can be put
- * into those specific section.
- * e.g
- * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
- * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
- */
-#ifndef CFG_TUSB_MEM_SECTION
-  #define CFG_TUSB_MEM_SECTION
-#endif
-
-#ifndef CFG_TUSB_MEM_ALIGN
-  #define CFG_TUSB_MEM_ALIGN __attribute__((aligned(4)))
-#endif
-
-//--------------------------------------------------------------------
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------
-
-#ifndef CFG_TUD_ENDPOINT0_SIZE
-  #define CFG_TUD_ENDPOINT0_SIZE 64
-#endif
-
-//------------- CLASS -------------//
-#define CFG_TUD_HID     1
-#define CFG_TUD_CDC     0
-#define CFG_TUD_MSC     0
-#define CFG_TUD_MIDI    0
-#define CFG_TUD_VENDOR  0
-#define CFG_TUD_PRINTER 1
-
-// HID buffer size Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE 16
-
-// Printer buffer sizes
-#define CFG_TUD_PRINTER_RX_BUFSIZE 512
-#define CFG_TUD_PRINTER_TX_BUFSIZE 512
-#define CFG_TUD_PRINTER_EP_BUFSIZE 512
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */
diff --git a/examples/device/printer_to_hid/src/usb_descriptors.c b/examples/device/printer_to_hid/src/usb_descriptors.c
deleted file mode 100644
index 1cbabb02e..000000000
--- a/examples/device/printer_to_hid/src/usb_descriptors.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "bsp/board_api.h"
-#include "tusb.h"
-
-#include "usb_descriptors.h"
-
-#define USB_VID   0xCafe
-#define USB_PID   0x4004
-#define USB_BCD   0x0200
-
-//--------------------------------------------------------------------+
-// Device Descriptors
-//--------------------------------------------------------------------+
-static tusb_desc_device_t const desc_device = {
-  .bLength            = sizeof(tusb_desc_device_t),
-  .bDescriptorType    = TUSB_DESC_DEVICE,
-  .bcdUSB             = USB_BCD,
-  .bDeviceClass       = 0x00,
-  .bDeviceSubClass    = 0x00,
-  .bDeviceProtocol    = 0x00,
-  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-
-  .idVendor           = USB_VID,
-  .idProduct          = USB_PID,
-  .bcdDevice          = 0x0100,
-
-  .iManufacturer      = 0x01,
-  .iProduct           = 0x02,
-  .iSerialNumber      = 0x03,
-
-  .bNumConfigurations = 0x01
-};
-
-uint8_t const *tud_descriptor_device_cb(void) {
-  return (uint8_t const *) &desc_device;
-}
-
-//--------------------------------------------------------------------+
-// HID Report Descriptor
-//--------------------------------------------------------------------+
-static uint8_t const desc_hid_report[] = {
-  TUD_HID_REPORT_DESC_KEYBOARD(HID_REPORT_ID(REPORT_ID_KEYBOARD))
-};
-
-uint8_t const *tud_hid_descriptor_report_cb(uint8_t instance) {
-  (void)instance;
-  return desc_hid_report;
-}
-
-//--------------------------------------------------------------------+
-// Configuration Descriptor
-//--------------------------------------------------------------------+
-
-// Endpoint numbers
-#if defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY)
-  #define EPNUM_HID         0x81
-  #define EPNUM_PRINTER_OUT 0x02
-  #define EPNUM_PRINTER_IN  0x83
-#else
-  #define EPNUM_HID         0x81
-  #define EPNUM_PRINTER_OUT 0x02
-  #define EPNUM_PRINTER_IN  0x82
-#endif
-
-// full speed configuration
-static uint8_t const desc_fs_configuration[] = {
-  // Config number, interface count, string index, total length, attribute, power in mA
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
-
-  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
-  TUD_HID_DESCRIPTOR(ITF_NUM_HID, 4, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID,
-                     CFG_TUD_HID_EP_BUFSIZE, 5),
-
-  // Interface number, string index, EP Bulk Out address, EP Bulk In address, EP size
-  TUD_PRINTER_DESCRIPTOR(ITF_NUM_PRINTER, 5, EPNUM_PRINTER_OUT, EPNUM_PRINTER_IN, 64),
-};
-
-#if TUD_OPT_HIGH_SPEED
-// high speed configuration
-static uint8_t const desc_hs_configuration[] = {
-  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
-
-  TUD_HID_DESCRIPTOR(ITF_NUM_HID, 4, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID,
-                     CFG_TUD_HID_EP_BUFSIZE, 5),
-
-  TUD_PRINTER_DESCRIPTOR(ITF_NUM_PRINTER, 5, EPNUM_PRINTER_OUT, EPNUM_PRINTER_IN, 512),
-};
-
-// other speed configuration
-static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];
-
-// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
-static tusb_desc_device_qualifier_t const desc_device_qualifier = {
-  .bLength            = sizeof(tusb_desc_device_qualifier_t),
-  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
-  .bcdUSB             = USB_BCD,
-
-  .bDeviceClass       = 0x00,
-  .bDeviceSubClass    = 0x00,
-  .bDeviceProtocol    = 0x00,
-
-  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
-  .bNumConfigurations = 0x01,
-  .bReserved          = 0x00
-};
-
-uint8_t const *tud_descriptor_device_qualifier_cb(void) {
-  return (uint8_t const *) &desc_device_qualifier;
-}
-
-uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) {
-  (void) index;
-
-  // if link speed is high return fullspeed config, and vice versa
-  memcpy(desc_other_speed_config,
-         (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration,
-         CONFIG_TOTAL_LEN);
-
-  desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;
-
-  return desc_other_speed_config;
-}
-
-#endif // TUD_OPT_HIGH_SPEED
-
-uint8_t const *tud_descriptor_configuration_cb(uint8_t index) {
-  (void) index;
-
-#if TUD_OPT_HIGH_SPEED
-  return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration;
-#else
-  return desc_fs_configuration;
-#endif
-}
-
-//--------------------------------------------------------------------+
-// String Descriptors
-//--------------------------------------------------------------------+
-
-enum {
-  STRID_LANGID = 0,
-  STRID_MANUFACTURER,
-  STRID_PRODUCT,
-  STRID_SERIAL,
-  STRID_HID,
-  STRID_PRINTER,
-};
-
-static char const *string_desc_arr[] = {
-  (const char[]) { 0x09, 0x04 }, // 0: supported language is English (0x0409)
-  "TinyUSB",                     // 1: Manufacturer
-  "TinyUSB Device",              // 2: Product
-  NULL,                          // 3: Serial, use unique ID if possible
-  "TinyUSB HID",                 // 4: HID Interface
-  "TinyUSB Printer",             // 5: Printer Interface
-};
-
-static uint16_t _desc_str[32 + 1];
-
-uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) {
-  (void) langid;
-  size_t chr_count;
-
-  switch (index) {
-    case STRID_LANGID:
-      memcpy(&_desc_str[1], string_desc_arr[0], 2);
-      chr_count = 1;
-      break;
-
-    case STRID_SERIAL:
-      chr_count = board_usb_get_serial(_desc_str + 1, 32);
-      break;
-
-    default:
-      if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { return NULL; }
-
-      const char *str = string_desc_arr[index];
-
-      chr_count = strlen(str);
-      size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1;
-      if (chr_count > max_count) { chr_count = max_count; }
-
-      for (size_t i = 0; i < chr_count; i++) {
-        _desc_str[1 + i] = str[i];
-      }
-      break;
-  }
-
-  _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2));
-  return _desc_str;
-}
diff --git a/examples/device/printer_to_hid/src/usb_descriptors.h b/examples/device/printer_to_hid/src/usb_descriptors.h
deleted file mode 100644
index 20c34f151..000000000
--- a/examples/device/printer_to_hid/src/usb_descriptors.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_DESCRIPTORS_H_
-#define USB_DESCRIPTORS_H_
-
-// HID report ID
-enum {
-  REPORT_ID_KEYBOARD = 1,
-};
-
-enum {
-  ITF_NUM_HID,
-  ITF_NUM_PRINTER,
-  ITF_NUM_TOTAL,
-};
-
-#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_HID_DESC_LEN + TUD_PRINTER_DESC_LEN)
-
-#endif /* USB_DESCRIPTORS_H_ */